When to use p0170 or p0173 fault codes?
It appears to me that the PCM (powertrain control module) logic used by some European car manufacturers to set a P0170 (or P0173) fault code simply isn’t used by American vehicle manufacturers. It is more common to see P0171, 0174, 0172, 0175 codes set with regard to fuel trim malfunctions on American cars.
What are the symptoms of a p0170 DTC?
Symptoms of a P0170 DTC may include: Potential causes include a vacuum leak, unmetered air leaks Fuel saturated engine oil Leak in turbo air charge hoses (if equipped) Possibly bad O2 sensor (If Mercedes, may require adaptation with M-Benz compatible scan tool.) Oil contamination in MAF connector or O2 sensor connectors.
Can a bad O2 sensor cause a p0170?
A bad O2 sensor could cause a P0170, or P0173. Repair cause of oil leak and replace oil-fouled O2 sensor. Among several codes my car has, one is P0447 which is listed as EVAP emission system – vent control valve circuit open. No idea as to where to start checking as i am not sure if this car has a sensor in the fuel tank.
What causes a Mercedes Benz to have a p0170 code?
P0170 and P0173 Code Causes The most common cause of P0170 and P0173 on a Mercedes-Benz is a defective mass-airflow sensor. The MAF sensor gets dirty over time triggering the CEL and the two codes.
What are the causes of the p0170 code?
What are the causes of the P0170 code? Any condition that causes the engine to run lean such as a weak fuel pump, a clogged fuel filter, or a faulty fuel pressure regulator Any condition that causes the engine to run rich such as a mass air flow sensor, manifold absolute pressure sensor, or a faulty fuel pressure regulator
A bad O2 sensor could cause a P0170, or P0173. Repair cause of oil leak and replace oil-fouled O2 sensor. Among several codes my car has, one is P0447 which is listed as EVAP emission system – vent control valve circuit open. No idea as to where to start checking as i am not sure if this car has a sensor in the fuel tank.
What causes a p0170 fuel trim malfunction?
It may also have a P0173 referring to the same malfunction but on bank two. Symptoms of a P0170 DTC may include: Potential causes include a vacuum leak, unmetered air leaks Fuel saturated engine oil Leak in turbo air charge hoses (if equipped) Possibly bad O2 sensor (If Mercedes, may require adaptation with M-Benz compatible scan tool.)
Can a mechanic misdiagnose a Mercedes p0170?
If you troubleshoot this issue based on the two codes, a mechanic can misdiagnose the problem. In fact, these two codes are often misdiagnosed. Common misdiagnosis includes bad Oxygen sensors or worn spark plugs. These items are unlikely to fix the P0170/P0173 codes.
What does p0173 fuel trim code bank 2 mean?
In writing this article I’ve added Mercedes-Benz-specific info since it seems that M-B (and VW) are most prone to having this P0173 surface along with misfire codes or other fuel trim codes. P0173 means there was a malfunction in the computer’s control of the air:fuel ratio.
It may also have a P0173 referring to the same malfunction but on bank two. Symptoms of a P0170 DTC may include: Potential causes include a vacuum leak, unmetered air leaks Fuel saturated engine oil Leak in turbo air charge hoses (if equipped) Possibly bad O2 sensor (If Mercedes, may require adaptation with M-Benz compatible scan tool.)
What causes fault codes p0170 and p0173?
If P0170 and P0173 were caused by a bad MAF sensor and you replaced the sensor, the CEL should turn off in a couple of days. Even if you don’t clear the codes. If the fault codes are caused by a vacuum leak, the CEL will stay on or return.
In writing this article I’ve added Mercedes-Benz-specific info since it seems that M-B (and VW) are most prone to having this P0173 surface along with misfire codes or other fuel trim codes. P0173 means there was a malfunction in the computer’s control of the air:fuel ratio.
What does lean fault code p0171 mean on a car?
Your car or truck has either a P0171, P0174 lean fault code or both stored in the pc, these codes derive from Oxygen Sensor (O-2) readings. A lean code or codes suggest that there surely is too-much air in the exhaust.
A bad O2 sensor could cause a P0170, or P0173. Repair cause of oil leak and replace oil-fouled O2 sensor. Please help me i have my 2000 montero sport xls and i have code p0125 and p0173 please help dont have idea about cars.
It appears to me that the PCM (powertrain control module) logic used by some European car manufacturers to set a P0170 (or P0173) fault code simply isn’t used by American vehicle manufacturers. It is more common to see P0171, 0174, 0172, 0175 codes set with regard to fuel trim malfunctions on American cars.
P0170 and P0173 Code Causes The most common cause of P0170 and P0173 on a Mercedes-Benz is a defective mass-airflow sensor. The MAF sensor gets dirty over time triggering the CEL and the two codes.
What is the O2 sensor on Nissan p0170?
Recently the car threw a code while I was out of town. The Nissan code 0115 which converts to P0170 which is fuel system too lean, bank 2. The O2 sensor on that bank is very new because I got a code for that earlier. The car is running very rough and …
Is the Nissan p0170 fuel system too lean?
The Nissan code 0115 which converts to P0170 which is fuel system too lean, bank 2. The O2 sensor on that bank is very new because I got a code for that earlier. The car is running very rough and …
What causes rough running on a 7.3 Powerstroke?
7.3 Powerstroke Common Problem #10 – ICP. A 7.3 Injection Control Pressure sensor–ICP–sensor failure, will make your diesel engine run rough. You can check to see if the 7.3 ICP is causing that rough running by unplugging it. The PCM will then use default settings for the ICP and the rough running should go away.
What is the OBD 2 fault code p0107?
OBD II fault code P0107 is defined as “ Manifold Air Pressure/Barometric Pressure Circuit Low Input”, and is set when the PCM (Powertrain Control Module) detects a signal from the MAP (Manifold Air Pressure Sensor) that falls outside of the expected value for the reigning engine load or throttle position,…
What does the lean condition code p0171 mean?
What Does P0171 Mean? Combustion engines run most efficiently when they maintain an air-fuel mixture ratio of 14.7 parts air to 1 part fuel. When there are more than 14.7 parts air to 1 part fuel in the air-fuel mixture, a lean condition exists and code P0171 is triggered.
What does p0171 mean on a Honda Accord?
To keep the engine running properly, the powertrain control module (PCM) tries to compensate for the lean condition by injecting more fuel to the mixture in an effort to maintain the proper 14.7:1 ratio. When these adjustments become too large, code P0171 is triggered. If playback doesn’t begin shortly, try restarting your device.
What are the symptoms of check engine light p0171?
What Are The Symptoms Of P0171? 1 Check Engine Light is on 2 Lack of power from the engine 3 Rough idle 4 Engine coughing 5 Engine misfiring