When to reset INSP service and oil change?
If “OIL service” (oil change service every 15,000 km) was performed, only “OIL service” must be reset. If “INSP service” was performed (inspection service every 12 months or one inspection service every 30,000 km) with oil change, “INSP service” and “OIL service” must be reset.
How do you reset the maintenance required light on a Prius?
2015-2020 Prius (OIL RESET) Maintenance Required Indicator Reset STEP 1. Push the START BUTTON, don’t start the ENGINE (Accessory Mode Only) STEP 2. First Clear the System message by pressing the BACK Button on Driver Info Button.
How to reset the service reminder indicator ( Sri )?
NOTE: The Service Reminder Indicator can also be reset using an OEM scan tool. After performing the specified maintenance, reset the Service Reminder Indicator (SRI) displays according to the following table: Switch ignition ON. Press and hold odometer reset button (arrow) located below speedometer. See Fig. 2.
How to reset service reminder indicator on VW?
1. Turn ignition switch to OFF position. 2. Press and hold trip reset button under the speedometer. 3. Turn ignition switch to ON position and release reset button. SERVICE will appear on trip recorder (odometer) display. NOTE: Pressing trip recorder button again switches the display to INSP SERVICE without resetting the OEL (or OIL) service.
How to reset the perform service indicator system?
To reset the “Perform Service” indicator system (after performing the scheduled maintenance) refer to the following procedure: 1. Turn the ignition switch to the ON position (Do not start engine). 2. Press and release the brake pedal two times. 3. Fully depress the accelerator pedal slowly two times within 10 seconds.
2015-2020 Prius (OIL RESET) Maintenance Required Indicator Reset STEP 1. Push the START BUTTON, don’t start the ENGINE (Accessory Mode Only) STEP 2. First Clear the System message by pressing the BACK Button on Driver Info Button.
How do I Reset my Computer to factory settings?
Press and hold it until the service message appears. Release the button, and press and hold it again until the message says “Reset?”. Release the button again, and press and hold it while the message says “Reset in Progress,” until the message says, “Reset Successful.”
How to reset perform service indicator on Dodge 6.7L?
This bulletin is to aid you on resetting the Perform Service indicator you will find on a Dodge 6.7L with the EVIC displaying this message. PERFORM SERVICE INDICATOR- RESET the “Perform Service” message will display on the EVIC each time you turn the ignition switch to the ON/RUN position to indicate emission maintenance is required.