When to replace a car coolant light sensor?
If your car is older, the sensor has deteriorated with time and may be failing but not entirely failed. It is not a bad idea to keep an eye on your sensor’s readings. Replacing a sensor that is starting to show extreme signs of age and wear can prevent future problems.
Why is the coolant sensor on my radiator not working?
There could be a problem in the wiring to the PCM. High resistance or a partially broken wire causing the temp sensor signal to the PCM to be skewed / inaccurate. You need to have a scanner on it to look at what the PCM is showing as the coolant temp.
Why does my coolant light keep turning on?
Your thermostat may be stuck open and causing improper readings. If you recently had your thermostat replaced, check to see that it was replaced with the correct temperature range. Your coolant light might be signs of a more major engine problem.
Why are my radiator fans not turning on?
This is why the fans go on. Normally this means that the wiring and the PCM (which turns on the fans) is functioning. I would suspect a faulty sensor, but it was replaced. There could be a problem in the wiring to the PCM. High resistance or a partially broken wire causing the temp sensor signal to the PCM to be skewed / inaccurate.
What does a check engine light mean on an Oldsmobile Aurora?
A check engine light can indicate a broad spectrum of problems with your 1997 Oldsmobile Aurora. In some cases you need to pull over immediately to prevent damage while in others you merely need to tighten you gas cap next time you stop in order to reset the service engine soon light.
There could be a problem in the wiring to the PCM. High resistance or a partially broken wire causing the temp sensor signal to the PCM to be skewed / inaccurate. You need to have a scanner on it to look at what the PCM is showing as the coolant temp.
This is why the fans go on. Normally this means that the wiring and the PCM (which turns on the fans) is functioning. I would suspect a faulty sensor, but it was replaced. There could be a problem in the wiring to the PCM. High resistance or a partially broken wire causing the temp sensor signal to the PCM to be skewed / inaccurate.
What causes a car coolant sensor to fail?
Sensor Problems. Your sensor may fail or it may simply give a bad reading. A bad coolant sensor may cause a decrease in fuel efficiency or it may also cause the vehicle to fail your emissions inspection. It is likely that the problem may be a loose, corroded, or faulty connection and not a problem with the sensor itself.
When does low coolant light come on and off?
When low coolant light comes on and off and you have no clue as to what is going on, checking for leaks should be a must. Never Underestimate The Influence Of low coolant light comes on and off. Source: DoItYourself.com 3. Cold Weathers When you park your cars in cold or freezing temperatures, the coolant fluid tends to contract.
Why does the low coolant sensor come on and off?
But when the low coolant sensor turns on and off no matter what the season is, you may have several questions in mind. The first step towards addressing the issue starts with inspecting the coolant levels. If that is not the case, then the following reasons could help you know better. 1. Sensor Malfunctioning
If your car is older, the sensor has deteriorated with time and may be failing but not entirely failed. It is not a bad idea to keep an eye on your sensor’s readings. Replacing a sensor that is starting to show extreme signs of age and wear can prevent future problems.