When to inspect and adjust the valve clearance?
Inspect and adjust the valve clearance when the engine is cold (Engine coolant temperature : 20°C (68°F)) and cylinder head is installed on the cylinder block. In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure fuel.
How to measure the valve clearance on a Kia Sorento?
Measure the valve clearance. Using a thickness gauge, measure the clearance between the tappet and the base circle of camshaft. Record the out-of-specification valve clearance measurements. They will be used later to determine the required replacement adjusting tappet. Intake : 0.17 ~ 0.23mm (0.0067 ~ 0.0090in.)
How to adjust cylinder clearance on Kia Sportage?
Turn the crankshaft pulley one revolution (360°) and align the groove with timing mark “T” of the lower timing chain cover. Check only valves indicated as shown. Measure the valve clearance. 4. Adjust the intake and exhaust valve clearance. Set the No.1 cylinder to the TDC/compression.
What do you need to know about Kia repairs?
They include the engine oil filter, drain plug washer and other basic parts replacements, as well as inspections and top-ups/adjustments to guarantee that your Kia vehicle is always in its optimal condition. **Separate Order
When to adjust the valve clearance on a Kia Rio?
Inspect and adjust the valve clearance when the engine is cold (Engine coolant temperature : 20°C) and cylinder head is installed on the cylinder block. 1. Remove the cylinder head cover. (Refer to Timing system) 2. Set No.1 cylinder to top dead center (TDC)/compression.
When to adjust the valve clearance on a Hyundai Kona?
Inspect and adjust the valve clearance when the engine is cold (Engine coolant temperature : 20°C) and cylinder head is installed on the cylinder block. 1.
Inspect and adjust the valve clearance when the engine is cold (Engine coolant temperature : 20°C (68°F)) and cylinder head is installed on the cylinder block. In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure fuel.
How to check cylinder clearance on Kia Cee?
Inspect the valve clearance. Check only the intake valves of the 1st and 2nd cylinders and exhaust valves of the 1st and 3rd cylinders for their clearance. Using a thickness gauge, measure the clearance between the tappet and the base circle of camshaft. Record the out-of-specification valve clearance measurements.