When is the p0410 GMC code detected?

Most auto repairs shops charge between $75 and $150 per hour. When is the P0410 GMC code detected? The secondary air injection system does not detect the presence of air in the exhaust when introduced by the secondary air injection system. An air pump is used on the vehicle to lower tail pipe emissions on start-up.

Why do I get a p0410 code on my air conditioner?

Here you will find the right information to get rid of the P0410 code. The P0410 code indicates that a problem is encountered with the secondary air injection system and it is caused by either a mechanical or an electrical fault.

When is the code detected on a GMC?

When is the code detected? The secondary air injection system does not detect the presence of air in the exhaust when introduced by the secondary air injection system. An air pump is used on the vehicle to lower tail pipe emissions on start-up.

What are the air injection codes for Audi?

A common issue with GM, VW and Audi vehicles are air injection flow codes like p0410, p0411, and p0412. If you check engine light is on with any of these engine codes then in this video I will show you one of the most common faults when it comes to air injection codes and how to check if your air pump is working.

How does the secondary air injection system work?

The secondary air injection system does not detect the presence of air in the exhaust when introduced by the secondary air injection system. An air pump is used on the vehicle to lower tail pipe emissions on start-up. The Powertrain Control Module ( PCM) grounds the Air pump relay control circuit which energizes the Air pump.

What is the OBD II fault code PO 410?

OBD II fault code PO 410 refers to a fault or defect in the Secondary Air System, also known as the Secondary Air Injection System, that is fitted to some vehicles. The purpose of the system is to inject atmospheric air into the exhaust system during cold starts to assist in the oxidization,…

When does a p0411 air pump set?

P0411, that sets when there is an incorrect airflow to the exhaust, usually as the result of restrictions or leaks in the system. P0412, that sets when there is an issue with the control solenoid, as opposed to the air pump and check valves.

What are the symptoms of an OBD-2 trouble code?

Possibly symptoms include: MIL illumination obviously Hesitation on acceleration Noise from a bad/stuck AIR pump

What should the front oxygen sensor voltage be?

Just as the Air Pump kicks in, the front oxygen sensor (s) voltage should go to less than .125 volts ( 125 millivolts ). If this does not happen, then you have verified a fault condition in the SAS or Secondary Air System. If you do not hear the Air Pump Motor start, then check the SAS Air Pump and relay.

What does secondary air injection system malfunction mean?

Error Code P0410 – Secondary Air Injection System Malfunction. Error Code P0410 is described as Secondary Air Injection System Malfunction. This means there’s an issue in the vehicle’s emission system, and can be caused by either electrical or mechanical failure.

How to get rid of an error code on an air pump?

To get rid of this error code, you can do the following: 1 Replace both the air pumps and the one-way check valve 2 Try and clean the air pump and test it. The one-way air check valve must be replaced as well 3 Replace the inlet hose of the air pump 4 Replace the fuse of the air pump (you can find it under the hood)

Why does my Chevy S10 have a p0410 light?

The AIR pump itself is the most common cause of P0410. They are relatively affordable. If they are no longer accepting instruction from the ECU, P0410 will be thrown. P0410 in the Chevy S10 is not likely to cause the vehicle to break down, and rarely causes symptoms other than the check engine light.

What causes the secondary air injection system to fail?

It is letting you know that there is an issue with the secondary air injection system. The secondary air injection system injects air into the exhaust to help lower emissions. Most of the time, P0410 is going to be caused by a failure in this pump or the one way check valve.

What to do if your air injection pump is defective?

If you have also checked the O2 oxygen sensor and all electrical connections, it is possible that the secondary air injection pump is defective and needs to be replaced. You can either visit a professional mechanic for replacement or do the procedure at home. Open the hood of the vehicle and locate the air injection pump.

What causes an air pump to generate a p0410 code?

Here are some of the main causes of why the P0410 trouble code generates: 1 Damaged air pump check valves 2 Bad pump relays 3 Defective control solenoids 4 Blockage in the air injection system 5 Bad O2 sensor 6 Clogged catalyst 7 Blown air pump fuel 8 Damaged vacuum lines

How much does it cost to repair a GMC p0440?

The cost of diagnosing the P0440 GMC code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

What does the p0440 code on my car mean?

Tech notes. The P0440 code means that the control module has detected a leak in the Evaporative Emission (EVAP). Loose fuel tank filler cap is the most common cause that triggers the P0440 code.

What is the trouble code on a GMC Sierra?

A very common trouble code with the GMC Sierra is the P0440 code. This trouble code references a number that is given to you when you plug your Sierra into a OBDII scanner. P0440 Indicates that something is wrong with the EVAP system.

How much does it cost to diagnose the p0440 GMC code?

The cost of diagnosing the P0440 GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour. When is the P0440 GMC code detected? The Evaporative Emission (EVAP) system is not able to build vacuum

What does the code p0410 mean on a car?

Code P0410 is the result of the Engine Control Module (ECM) indicating a malfunctioning Secondary Air Injection System. This happens when the O2 sensor does not accurately detect the changes in the O2 level of the exhaust while the air injection system is functioning.

What does air pump do in GMC p0410?

P0410 GMC Meaning An air pump is used on the vehicle to lower tail pipe emissions on start-up. The Powertrain Control Module (PCM) grounds the Air pump relay control circuit which energizes the Air pump. The PCM also grounds the Air combination valve vacuum control solenoid circuit, which energizes the Air vacuum control solenoid.

What does p0440 mean on a fuel tank?

What Does P0440 Mean? The evaporative emission control (EVAP) system prevents fuel vapors from escaping into the atmosphere. When the vent control valve is open, the fuel vapors from the fuel tank travel through a vent line to the charcoal canister.

What does the P0420 code on a GMC Envoy mean?

GMC Envoy P0420 Code Symptoms. The P0420 code in a GMC Envoy will often be thrown one of your oxygen sensors are not functioning properly. Typically, the code will be triggered by the upstream oxygen sensor (before the converter). There aren’t usually any drivability issues associated with P0420.

What does the OBD code mean on a GMC Envoy?

P0420 is a OBDII trouble code. The code technically stands for: Your Envoy has at least two oxygen sensors, one before and after the catalytic converter. Among the many jobs that oxygen sensors have is they have to measure the emissions levels coming in and out of the converter.

What is the diagnostic code for secondary air injection?

P0410 is a diagnostic trouble code (DTC) for “Secondary Air Injection System Malfunction”.

Navigation