When did the distributor come out on the Jeep Grand Cherokee?
Jeep introduced the Grand Cherokee in 1993, and engines from then until 2000 contained distributors. The 2.5L and 4.0L engines had distributors all through those years, with the 5.2L and 5.9L joining the group from 1993 to 1998. If you’re handy with some basic tools, you can replace the distributor.
Is there a problem with my Jeep Grand Cherokee?
Very often, this will solve the problem. But Jeep Grand Cherokees seem especially prone to more serious transmission problems, and some owners are quite vexed at their inability to determine the causes.
How to remove the skim from a jeep?
SOLVED!!!! ECM REPROGRAMMED Jeep Grand Cherokee. Remove SKIM from ECM – YouTube JEEP SKIM KEY PROBLEM… SOLVED!!!! ECM REPROGRAMMED Jeep Grand Cherokee. Remove SKIM from ECM
Can a Jeep Grand Cherokee Drive in two gears?
You’re often still able to drive the vehicle, but it only operates in one or two gears. For example, you may find that you’re only able to drive the car in the automatic transmission’s third gear, only being able to select the other two gears when you shift the transmission manually.
Where can I buy 1997 Jeep Grand Cherokee parts?
Jeep OEM 1997 Grand Cherokee Parts from Thunder CDJR. Genuine Jeep parts are the smart choice for repair, maintenance, or upgrade of your 1997 Jeep Grand Cherokee . When you choose OEM parts for your vehicle, you’re choosing to maintain the quality and reliability of your vehicle, ensuring peak performance mile after mile.
Are there any problems with the Jeep Grand Cherokee?
Jeep Grand Cherokee owners have reported 37 problems related to engine clicking and tapping noises (under the engine and engine cooling category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Jeep Grand Cherokee based on all problems reported for the Grand Cherokee.
Can you replace the engine in a Jeep Cherokee?
We make it easy to breath new life into your older Jeep with a replacement engine from ATK. Choose the correct engine to replace the one currently in your vehicle (ie: Jeep 4.0L engine), then when you’re ready to return your core, ATK simplifies the process with their 360-Degree Core Guarantee.
Where does the Jeep Grand Cherokee come from?
European Grand Cherokees are manufactured in Austria by Magna Steyr. The Grand Cherokee “played a significant part in reviving Chrysler’s fortunes by moving it into the then nascent market for high-margin sports utility vehicles.”
How long does it take to replace the thermostat on a Jeep Cherokee?
If the temperature continues to climb past that point you may have air in the cooling system or a part of your cooling system may need to be replaced or upgraded. Replacing the thermostat on your 4.0 Jeep should only take about an hour or less, and is a fairly easy job even for the novice mechanic.
What should the temperature gauge be on a Jeep Cherokee?
Refill cooling system with coolant. Make sure not to mix coolants as red and green coolant don’t mix well and can end up becoming a jelly like substance. The last step is to start your Jeep up and let it idle. The temperature gauge should climb to 160*, 180*, or 195* depending on what thermostat you just installed.
Jeep introduced the Grand Cherokee in 1993, and engines from then until 2000 contained distributors. The 2.5L and 4.0L engines had distributors all through those years, with the 5.2L and 5.9L joining the group from 1993 to 1998. If you’re handy with some basic tools, you can replace the distributor.
If the temperature continues to climb past that point you may have air in the cooling system or a part of your cooling system may need to be replaced or upgraded. Replacing the thermostat on your 4.0 Jeep should only take about an hour or less, and is a fairly easy job even for the novice mechanic.
Refill cooling system with coolant. Make sure not to mix coolants as red and green coolant don’t mix well and can end up becoming a jelly like substance. The last step is to start your Jeep up and let it idle. The temperature gauge should climb to 160*, 180*, or 195* depending on what thermostat you just installed.
Is there a problem with the ignition on a Jeep Cherokee?
If there is one common denominator amongst practically all 1984 to 1996 Jeep Cherokees (XJ , ZJ, WJ and WK’s alike) it is a bad ignition. Though typically robust, most Jeep Cherokees will eventually experience ignition failure, leaving otherwise happy owners stranded.
Why does my Jeep Cherokee not turn on?
Symptoms don’t get more straightforward than this: The truck doesn’t start. Turn the key, and everything comes on, but the driveway is absent of that Jeep rumble. When you turn the key, a number of things happen. First, the key-switch engages the vehicle’s accessory systems like the radio.
Is the AW4 transmission on the Jeep XJ Cherokee?
Diagnosis of faults in the Jeep AW4 transmission. The automatic transmission used in the Jeep XJ Cherokee is nearly bullet proof. Seldom does it ever give trouble.
How to replace ignition distributor in Jeep Grand Cherokee?
9. Rotor, cap, connections Now install the rotor, then the cap and distributor connector. Then using previously made notes correctly connect all ignition cables. 10. Fan Reinstall the auxiliary fan and connect negative battery cable. Start engine. Take a beer. Technorati Tags: Jeep, Cherokee, XJ, Grand Cherokee, ZJ, distributor, rotor, cap
How to replace oil pump distributor in Jeep?
Before inserting new distributor in it’s place you need to make some alignment. First, using flat screwdriver, set the oil pump shaft around 11 o’clock position: 7. New distributor preparation Then take the new distributor, put the old cap on it and mark the distributor next to the number one cylinder terminal as you did with the old one.
Do you need to turn crankshaft vibration damper on Jeep Grand Cherokee?
This step is only necessary when procedure is done on the Cherokee (XJ) model – this is the only way to turn the crankshaft vibration damper. In Grand Cherokee (ZJ) you have access to this bolt from underneath.
What’s the name of the new Jeep Wrangler?
You will see Wranglers (JK, TJ and YJ), Cherokees (XJ), CJs, Grand Cherokees (WK, WK2, ZJ, WJ) and even the new Cherokee KL. Questions? Give us a call. And while you are at it, check out our Torque Blog and subscribe to our popular YouTube Channel.
How long does it take to replace distributor rotor on Jeep?
Get that hot, efficient spark back with this OEM style replacement distributor rotor. 12 month / 12,000 Mile Limited Warranty. Good replacement if you are looking to do a full tune up on your Jeep.
When did the Jeep Wrangler YJ come out?
Called the YJ, that first generation Jeep Wrangler remained in production from 1987 to 1995. The second-generation TJ Wrangler followed in 1997 and was the brand’s bellwether until its replacement in 2007 by the Wrangler JK (now offered in 2- and 4-door models).
9. Rotor, cap, connections Now install the rotor, then the cap and distributor connector. Then using previously made notes correctly connect all ignition cables. 10. Fan Reinstall the auxiliary fan and connect negative battery cable. Start engine. Take a beer. Technorati Tags: Jeep, Cherokee, XJ, Grand Cherokee, ZJ, distributor, rotor, cap
This step is only necessary when procedure is done on the Cherokee (XJ) model – this is the only way to turn the crankshaft vibration damper. In Grand Cherokee (ZJ) you have access to this bolt from underneath.
Before inserting new distributor in it’s place you need to make some alignment. First, using flat screwdriver, set the oil pump shaft around 11 o’clock position: 7. New distributor preparation Then take the new distributor, put the old cap on it and mark the distributor next to the number one cylinder terminal as you did with the old one.