When did the ABC system start on my Mercedes SL500?

In July of 2014, I purchased a used 2003 Mercedes SL500 with 80,000 miles on it. And within days the infamous “ABC Drive Carefully” message started appearing on the dash.

What kind of fluid is in Mercedes ABC?

Mercedes ABC Fluid Type. The fluid type that is installed at the factory is Mercedes-Benz Hydraulic Oil Q 1 32 0001 manufactured by Pentosin. If you like saving money, the Pentosin CHF 11S is the same as Mercedes-Benz Hydraulic Oil Q 1 32 0001. In fact it is printed on the Mercedes ABC container as well.

What happens when the ABC light is on?

If (Active Body Control) ABC light is ON or is flashing there is a good change your suspension system may be low on hydraulic fluid. When the ABC fluid level gets too low, you may also notice a humming or whining noise coming from the engine.

Where is the ABC reservoir on a Mercedes Benz?

ABC reservoir is located in the engine bay, behind the driver’s side headlight. You will need to remove the large bolt, then slide bracket. This will give you enough room to remove the cap. Remove the large cap on top of the ABC reservoir. The cap has the filter integrated below the lid.

Can a bad pump cause an ABC light to trip?

A leak will be indicitive of hydraulic fluid on the ground and one side lower than the other. A bad pump will trip the light with no change in suspension height. I hope for your sake it is a leak. I just replaced my pump and all the hoses.

When does Mercedes Benz ABC malfunction come on?

Mercedes Benz ABC Malfunction, Fluid leaking, Active Body Control System – YouTube Found this in my routine Diagnosis of a suspension issue. Would only come on when hitting speed bumps or anything that would drop the suspension out. Hope th… Found this in my routine Diagnosis of a suspension issue.

Can a failed ABS sensor trigger the Bas light?

If you have an ABS sensor that has failed, it will also trigger the ABS, ESP, BAS light. Because the ESP system depends on the ABS system to function properly, the ESP system will also get disabled.

What are the codes for an ABS warning light?

If after testing the sensor or if you have scanned the ABS computer and get a trouble code C0035, C0040, C0041, C0045, C0046, C0050, C0051, C1221, C1222, C1223, C1224, C1225, C1226, C1227, C1228 , C1232, C1233, C1234 or C1235 the sensor is either unplugged or it has shorted out and needs replacement.

What is ABC malfunction warning on Mercedes SL550?

ABC Malfunction warning on. Fluid leak visible under vehicle. Steering is impossibly hard. ABC malfunction showed on dash and car went into limp mode. Dealer diagnosed as pump failure $4,700 to replace. No observable leaks and fluid level was correct. Car did not squat.

What’s the problem with Mercedes Benz ABC system?

The ABC system noticed a problem when starting up and has disabled itself, locking the struts in their current position. This may result in what many people describe as a “tuna boat” ride (very bouncy). The system has a fluid leak and the fluid level in the reservoir is extremely low, preventing the system from getting up to operating pressure.

What was the ABC malfunction on my car?

ABC malfunction showed on dash and car went into limp mode. Dealer diagnosed as pump failure $4,700 to replace. No observable leaks and fluid level was correct. Car did not squat. Problem occurred at end of winter could be temperature related. All this was after front strut and hydraulic hose replacement 5mo earlier.

In July of 2014, I purchased a used 2003 Mercedes SL500 with 80,000 miles on it. And within days the infamous “ABC Drive Carefully” message started appearing on the dash.

How many miles does my ABC car have?

As you turn on the engine it shows in the dashboard ABC visit workshop. It has 81,000 mileage and 75,000 mileage was done. What are the things should be done for ABC service as indicated as warning sign?

Where is the ABC fluid reservoir on a car?

Check your ABC fluid reservoir located in the hood of your car on the driver side. It is a blue label that say Active Body Control. Now there are two reservoir. A big one and a small one. Check the big one closet to the wind shield. The one with the blue ABC label you don’t touch. The black nob next the it you pull out.

What to do if Mercedes Benz ABC system is not working?

Take the car to the dealer or a workshop with a Mercedes STAR diagnostic system (SDS). If the problem is not leak related, then you will need the diagnostic codes to determine what component is having the problem. “Drive Carefully” or “Visit Workshop” comes on the dash and stays.

Where is pulsation dampener on Mercedes Benz W215?

On the W215 it is attached to the undercarriage near the transmission. On later models with the updated ABC system (2007+), the pulsation dampener is on the ABC pump. Replace the dampener. Cost is around $175 and is a relatively simple DIY project.

Where is the ABC pump on a Mercedes Benz?

On the R230 it is located in the front-left wheel well. On the W215 it is attached to the undercarriage near the transmission. On later models with the updated ABC system (2007+), the pulsation dampener is on the ABC pump. Replace the dampener. Cost is around $175 and is a relatively simple DIY project. Or around $600-800 if you have a shop do it.

Why is my ABC system not working properly?

Stopping and starting the car sometimes resets things back to normal for a while. The pump is weak, resulting in inconsistent performance. Sometimes the ABC system reaches operating pressure, sometimes not. A strut travel sensor or ride height sensor may be going bad. Some motion from driving gets it working again.

Is it possible for an ABC pump to fail?

First of all, let’s start with the ABC system. Yes, it will fail. There are no “if’s” but rather “when”. The design isn’t particularly brilliant and the pressure generated by the hydraulic fluid far exceeds what the seals on the struts and the pump are designed to handle. Hence once it fails, if fails massively.

What should I do if my ABC pump stops working?

If so, do not start the car again until you have added more fluid and restored normal pump operation. If you attempt to drive the car without adequate fluid, the pump will be destroyed in very quick order (a $2,500 repair), while shedding metal debris into the system that will damage other components as well.

What does ABC warning light on Mercedes SL500 mean?

I replaced the tandem pump and the car was fine, for about two days! Now, the “ABC warning” light comes on in red, saying “car too low”. the suspension will raise one side of the car, and lower the other. Or, sometimes, the car will run just fine.

Are there any problems with the Mercedes CL500?

Keep track that the ABC fluid is good is another important issue with any ABC equipped Benz. These cars are heavy. Your going to burn through front pads and tires every 20,000. But my CL is a pleasure and has been very dependable car overall. My 2000 CL500 just hit 88]

Why does the ABC warning light come on?

Now, the “ABC warning” light comes on in red, saying “car too low”. the suspension will raise one side of the car, and lower the other. Or, sometimes, the car will run just fine. Can anyone PLEASE give me some guidance on how to fix this?

Is there a recall on the CL500 air pump?

You can thank the EPA for that one… it dosen’t actually purify anything, rather just tricks the computer to “think” it is burning cleaner… anyhow, there is a recall for the relays that operate the air pump, and they stick open causing the pump to stay running and burn out. The $40 relay burns up a $400 pump.

Is there hydraulic oil leak on MB SL500?

MB SL500 hydraulic oil leaked, took to MB dealer they indicated the seals in the two blocks need to be replaced. Makes sense for the age of the car, just would like to know what the estimated cost should be for this work.

What is CSoT fault code for Mercedes SL500?

Previously I had a system fault code of c1525 systme pressure too low,I replaced the ABC filer in expansion reservoiw which csot about $2,134 to service.The dealer recommend to replace bot hthe front and rear valve blocks due to lates fault codes c1525-001-0002-004. This will cost $5,000.

Why does my Mercedes Benz have a hydraulic leak?

The active body control system can leak fluid from numerous areas, including the tandem pump, hydraulic lines, struts, and/or seals. If it is not repaired, the vehicle ride height could drop too low and cause damage to the undercarriage. Ready to sell? CarMax buys all kinds of cars

What happens if you open the hardtop on a Mercedes SL500?

If either of these are open, the retractable hardtop cannot operate. Once the lid and cover are shut, the hardtop switch may be used. Start the vehicle’s engine, and let the car run while you open or close the hardtop. The hardtop does not operate if the car’s battery voltage is too low.

What was the problem with my 2004 CL 500?

Well, I had the same problem with my 2004 CL 500. Then when stopped at a traffic light the driver front end went down, and passenger rear end was up. Mine ended up being, the height sensor, also a leak in the power steering was connected!

How to use ABC fluid in Mercedes Benz?

If you are using start go to ABC COntrol Unit > Acuations > Cyclically alternating actuation of the front and rear suspension struts (pitch) >F3 If Star Diagnostic is not available, use the ABC switch in the dashboard and cycle it on and off every 5 seconds. Open all your ABC fluid container and get them ready.

Can a vacuum pump change the ABC fluid?

Yes, but using a vacuum pump will not change all of the ABC fluid. You will be replacing only about 30% of the fluid by sucking out the old fluid and filling with new ABC fluid. Make sure to do this with the engine off.

What does it mean when your Mercedes system says Red?

Blue or white is a minor warning, and red is a severe warning and usually indicates the system has shutdown. If the message only appears briefly, the problem was likely a momentary drop in system pressure. The system recovered and is working normally again. If the message stays on the dash, something has gone wrong with the system.

What are the warning lights on a Mercedes Benz?

The following are warning lights and indicators found in vehicles built by Mercedes Benz. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are over 40 of them so be patient!

How does the ABC comprsessor work in a Mercedes?

The ABC comprsessor runs the air through your suspension which lowers and raises your car, it also keeps your car in a steady line when driving i.e., the ABC button that you push to tighten up your steering and your suspension, or the button to raise and lower your Mercedes by 3″ or 6″.

How much is a 2003 Mercedes Benz SL 500 Roadster worth?

Year2006200520042003200220012000199919981997199619951994Year See Trade-in Value Used 2003 Mercedes-Benz SL-Class SL 500 Roadster 2D Edit OptionsMileage: 108,005 4.6 Consumer Write a review View Gallery For Sale Near You 17 Mercedes-Benz SL-Class vehicles in your area.

Is the Mercedes-Benz CL 500 under warranty?

CL 500…The ABC system, sucks. This is the second time Ive had this issue. Thankfully, it happened the first time while under warranty at year 2. Since this seems to be an issue for these cars one might think that Mercedes would recall. I had a shock go out in the first three years of ownership.

When to expect a Mercedes Benz service visit?

Mercedes-Benz A-Service adheres to all required elements listed by model year and specific model as indicated on the corresponding service sheet for Mercedes-Benz Maintenance Systems in the USA. Mercedes-Benz B-Service The B-Service first visit is at approximately 20,000 miles or 1 year after the previous service.

What does Active Body Control ( ABC ) VISIT WORKSHOP mean?

The Active Body Control (ABC) “Visit Workshop” alert on your dash could mean a number of things as the ABC controls a lot i.e., suspension, lowering and raising car, and driveability. It could also be a leak in your power steering. Check under your car, after it has sit for awhile, and see if it has any leaks.

How do you remove an ABC pump from a Mercedes Benz?

Loosen the hose clamps from the 2 hoses where they go to the power steering reservoir and ABC reservoir, then pull the hoses from them. Remove the front 2 of the three 10mm bolts holding the reservoir assembly in the car, then loosen the 3rd nut that attaches the bracket to the strut tower.

What should I use to replace my ABC pump?

Wash your hands or replace your gloves before reassembly, in order to reduce risk of contaminants getting into the ABC system during assembly. Reinstall the new pump in the reverse order of the steps above. I used Loctite and 25nm as the torque setting for all the etorx as I replaced them.

Where is the pulsation dampener on a Mercedes Benz?

The ABC component most likely to cause this noise is the pulsation dampener. The location varies by model and year. On the R230 it is located in the front-left wheel well. On the W215 it is attached to the undercarriage near the transmission. On later models with the updated ABC system (2007+), the pulsation dampener is on the ABC pump.

How much does it cost to replace ABC pump?

-Inconsistent and vague suspension. Mercedes here quoted $7k for the ABC pump, plus $850 to flush the fluid. They also wanted $3k for the pressure accumulators and $2750 for the front left strut. I replaced all the pressure accumulators for around $600 but still got the ABC warning.

How is the ABC pump held in place?

The rear of the pump is held in place with a nut through an engine bracket onto a captive stud in the pump. In order to access this nut, you need to remove the cylinder that the banjo bolts go into from the ABC pump. It is held in place by 2 etorx bolts which are not so easy to access.

What should I do to Prime my ABC pump?

Prepare your air pressurizing kit to prime the ABC pump again. Start the car with a helper while you check for leaks. Put a few bar of air pressure into the ABC tank to prime the pump for 15 seconds or so. Keep an eye on the fluid level and top up as required to maintain the levels.

What causes the corner of a Mercedes Benz to sag?

Per MB, it is normal for the car to sag after a couple of weeks given the design of the valve blocks. If a corner sags after only a few days, then you should be concerned. 2) The valve block is not making a good seal, allowing fluid to escape out of the strut and return to the reservoir, (most likely).

What happens if I Drive my Mercedes without the ABC pump?

If you attempt to drive the car without adequate fluid, the pump will be destroyed in very quick order (a $2,500 repair), while shedding metal debris into the system that will damage other components as well. It is NOT worth trying to drive the rest of the way home!!!!

What are the common problems with a Mercedes SL500?

• Oil leaks from the oil level sensor are common. • The crankshaft position sensors tend to fail. Exhaust & Emissions No common problems reported. Electrical & Lights • Brake light switch failure can cause the ESP and BAS warnings to illuminate.

What kind of brakes does a Mercedes SL500 have?

Brakes • This vehicle has sensotronic brake control (SBC). If the SBC light on the dash illuminates, have the brakes checked. If the SBC is not working, limited brake pressure is delivered to the front brakes, increasing the distance it takes to stop.

How much does a Mercedes SL Class SL 500 cost?

Monthly Estimate based on a 4.4% rate for 60 months, $15,995 vehicle price, $0 down payment, $0 trade-in, $0 sales tax. Super helpful and honest in their dealings. I did buy my Toyota Sequoia and made a good deal with them on replacement tires.

How did the Mercedes Benz SL Class get its name?

Mercedes-Benz SL-Class. The Mercedes-Benz SL-Class is a grand touring car manufactured by Mercedes since 1954. The designation SL derives from the German Sportlich-Leicht, (English: Sport Lightweight). The original idea was suggested by American importer Max Hoffman, who perceived a market for a toned-down Gran Prix car tailored…

How do you remove belt from Mercedes pump?

To remove the belt, put a 17mm socket on the belt tensioner, release the tension by turning the bolt to the left and slide the belt off the pulleys. Make sure you review the diagram (see lower down the page) of the belt routing before you do this so you are clear how it goes back on.

How can I tell if my Mercedes remote is working?

Next, we need to check if the remote is sending out a message. The remote emits infrared waves. While you can’t see infrared light with your eyes, there is an easy way to check. Grab your phone and turn on the camera. Point the camera to your phone and carefully see if you notice a light every time you turn you press a button on the remote.

How much horsepower does a Mercedes SL500 have?

More important, the new SL moves the driving-excitement needle only incrementally, rather than substantially, out on the road. True, the new car finds 60 mph a full 0.5 second sooner than the last SL500 we tested ( C/D, December 1989), even though its SOHC 302-hp, 24-valve V-8 produces 20 horsepower less than Mercedes’ old DOHC 32-valve V-8.

Which is better Mercedes SL500 or Mercedes skidpad?

True, the new car finds 60 mph a full 0.5 second sooner than the last SL500 we tested ( C/D, December 1989), even though its SOHC 302-hp, 24-valve V-8 produces 20 horsepower less than Mercedes’ old DOHC 32-valve V-8. And the holding power on the skidpad was a very sticky 0.88 g, 0.06 g better than the SL500 we tested in ’89.

What are the dials on a Mercedes SL500?

The substitute is a pair of sculpted, hooded dials that take the most direct cue not from the lumpy 300SLs of the ’50s or the pagoda-roofed SLs of the ’60s, but from generations of dearly departed Alfa Romeo spiders.

What does ABC stand for in Mercedes Benz?

Let me Quentin Tarantino this story and go to the beginning… The suspension systems on the SL and CL models for Mercedes Benz is called ABC, AKA, Active Body Control. Instead of springs or air, the suspension uses hydraulic oil, a specialized pump, and a bunch of hydraulic valves to actuate the suspension and handling of your car.

What does it mean when your ABC system says Red?

Can a faulty ABS sensor cause the ESP system to be disabled?

Because the ESP system depends on the ABS system to function properly, the ESP system will also get disabled. A faulty ABS sensor could cause other issues as well such as Check Engine Light, car not moving when in Drive, speedometer not working.

Can you drive a car with a red light?

Can I drive car with red… ABC red light is on all the time and I can’t select any other function on the steering wheel thumb switch. Car is level with no other apparent suspension issues. I see no leaks and the hydraulic reservoir is full.

Is the ABC red light on all the time?

ABC red light is on all the time and I can’t select any other function on the steering wheel thumb switch. Car is level with no other apparent suspension issues. I see no leaks and the hydraulic reservoir is full. Can I still drive the car until the problem is fixed?

What does it mean when ABC says VISIT WORKSHOP?

Any time “Drive Carefully” or “Visit Workshop” appears and it isn’t related to a known issue you are dealing with. The ABC control module has sensed something wrong and is warning you. Blue or white is a minor warning, and red is a severe warning and usually indicates the system has shutdown.

What does it mean when your abs light comes on?

This would certainly cause the ABS light to come on, which means you’d need to replace the pump right away. When the ABS light activates on your car’s dashboard, it signals that something is wrong with the anti-lock braking system.

Why did my ABC light come on twice?

1988 300 TE. 2001 ML 55AMG The Shop is Open!!! well i guessed i jinxed myself.. light came on twice today.. first one was “visit workshop” and second was “drive carefully” I think it could be because after a while i used the abc sport button… oh well.. cl going to the dealer on monday to be checked out…

Are there any problems with the Mercedes SL500?

Mercedes Benz SL500 owners have reported 52 problems related to suspension (under the suspension category). The most recently reported issues are listed below. Tl the contact owns a 2004 mercedes-benz Sl500.

How does the ABC system work on a Mercedes Benz?

The ABC system is a computer controlled hydraulic system. A control module monitors sensors and sends commands to the valve blocks to add/remove fluid from the struts. The control module’s goal is to keep the chassis level at all times. Should any problems occur, it will inform the driver with a message on the dash.

Where is the ABC pump located on a Mercedes Benz?

To access the ABC pump bolt, use a short extension beneath the bracket pointing towards the front of the car. To access the engine block bolt, best access is from beneath, between the AC unit and the engine.

How long did it take to remove ABC pump?

Total time taken to remove and reinstall the pump was about 5 hours and 2 beers, including taking pics and notes. I spent another hour or so filling and bleeding the ABC and power steering.

What kind of suspension system does Mercedes Benz have?

Welcome to my guide for the Mercedes Active Body Control (ABC) Suspension System. In July of 2014, I purchased a used 2003 Mercedes SL500 with 80,000 miles on it. And within days the infamous “ABC Drive Carefully” message started appearing on the dash.

Why does my Mercedes S550 have a red battery symbol?

I drive an S550 and this is the luxury of luxuries. However, do some recon on your own when it comes to the RED battery symbol and the ABS/ESP warning on the dash. This happened in my S550…I changed brake switch, main engine battery, reset the computer…My last resort was to change the auxiliary battery in the TRUNK.

What kind of car is Mercedes Benz SL500?

The Porsche 911 Cabrio offers more performance, the BMW Z8 more exclusivity, the Jaguar XK8 has a more coddling interior and classically evocative lines, and the Lexus SC430 is more avant-garde. The old SL may have been content to be timeless executive wear, but the new SL wants to be this season’s sauciest slip-on.

What is the transponder on a Mercedes SL500?

It’s a transponder shaped like a credit card that unlocks the car and allows the driver to start and stop it by pushing a button on the shifter. It promises to make a lost art of inventing new curses to call forth misplaced keys.

Can a Mercedes SL500 be converted to coilovers?

I have a friend who installed a few years ago to his SL500 R230 coilovers set of mixed w211, r230 (SL350) and bilstein suspension parts. Runs great with sway bars for budget about USD1200.

What can you do with a Mercedes SL500?

Get to know your Mercedes SL500. Mercedes-Benz SL500 Conversion kits allow you to replace your air suspension, electronic/magnetic suspension, or hydraulic suspension with a conventional coil spring suspension and save up to 75% over the cost of repairs.

Do you need a Mercedes SL500 air suspension conversion kit?

Mercedes SL500 suspension systems are great but when the Mercedes SL500 struts fail or the Mercedes SL500 air springs go out, it’s almost impossible to drive. Find everything you need for your air suspension repair and maintenance at Strutmasters. Save even more money if you convert to our Mercedes SL500 conversion kit for a smooth and soft ride.

How often should I replace my Mercedes SL500 struts?

Mercedes-Benz SL500 Shock absorbers and struts absorb the impact on your suspension and help keep the tires firmly planted on the road. Replace them every 50,000 miles for the best ride possible. Mercedes-Benz SL500 Strut mounts wear out just like any other suspension component and need to be replaced when you replace your struts.

Where is the fault code on a Mercedes SL?

The AC control unit in the R129 Mercedes SL model along with a few other MB models of the time (outlined in the CS1000 manual) could be accessed to diagnose system problems by retrieving fault codes directly from the AC control unit console in the car.

What does Bas ESP ABS mean on a Mercedes Benz?

What does BAS ESP ABS light mean on a Mercedes-Benz? Let’s first take a look at what each of these acronyms means. BAS stands for Brake Assist System. It provides additional braking power in case of emergency situations.

How many horsepower does a Mercedes Benz SL500 have?

Mounted on top of a 5.0 litre normally aspirated V8-engine, it immediately enhances the engines power output from standard 306 Hp and 460 Nm (340 lb-ft) to up to 455 Hp and 585 Nm (433 lb-ft), without any need for further modifications to the engine. SL500 5.0 V8 shows gains of 158 HP and 93 lbs/ft of Torque.

What kind of steering does the Mercedes SL500 have?

The SL now enjoys more lively rack-and-pinion steering, but there’s still too much cushion in the weights and responses, too much old software left over from the luxury-car department to make the wheel as sharp as it could be.

Are there any problems with Mercedes star diagnostic?

Mercedes Star Diagnostic Problems with Software (Xentry) VM Ware Installation: All the setups that you see for sale that state that they use VMware environments are not legitimate hardware and software. Besides the fact that these scanners are not legal copies, they are also prone to crashing and run much slower than direct Windows installations.

How does Mercedes lowers the drops when parked?

Mercedes lowers drops on rear or front. When the car is parked the airmatic will try to level the car. It does this by discharging air from the airmatic suspension strut that is too high. Typically the car is leveled by lowering the one or two corners of the car that are too high.

Where is the bleed valve on a Mercedes Benz?

Follow the line from the strut to find it. Air is trapped in the line between the strut and the valve block. Correcting the problem involves lifting the vehicle or jacking up the vehicle to remove weight on the struts. Then opening the bleed valve located in the wheel well to let any air out. You can find the exact procedure with a google search.

What do you need to remove ABC pump?

Disconnect the electrical connector from the ABC pump. Remove the 2 etorx bolts on the front of the ABC pump. You will need to move the belt tensioner using the breaker bar to access one of the bolts. The rear of the pump is held in place with a nut through an engine bracket onto a captive stud in the pump.

When does the SBC light appear on the dash?

Once this limit has been reached, the Sensotronic Brake Control (SBC) light may illuminate on the dash or a brake related warning may appear on the trip computer.

What is the SBC brake defective stop code?

SBC Brake Failure Error CODE C249F Fault – MB Medic Brake defective Stop Vehicle! SBC Brake Failure Error CODE C249F Fault If you have a Mercedes Benz with Sensotronic Brakes also known as brake by wire you may have been greeted with the “Brakes Defective Stop Vehicle” error message in your instrument cluster.

If you have an ABS sensor that has failed, it will also trigger the ABS, ESP, BAS light. Because the ESP system depends on the ABS system to function properly, the ESP system will also get disabled.

What kind of suspension fluid does Mercedes use?

Mercedes uses hydraulic suspension in many models including S-Class, CL-Class, SL-Class, E-Class, etc. Mercedes-Benz cars that have Active Body Control (ABC) suspension use hydraulic fluid.

How to avoid a Mercedes c63s AMG crash?

Mercedes C63S AMG HARD CRASH INTO A TREE!! Drift goes wrong.. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

What are the problems with a Mercedes Benz?

Top 5 Mercedes-Benz no start problems 1 Engine Click, No Start 2 Engine Dies Right After It Starts 3 Car turns over, but it won’t start 4 The car makes a clicking noise but won’t start. Hint: Starter Problem or Low Battery 5 Key will not turn the ignition More …

What does the ABS warning light on a Mercedes mean?

If the ABS warning light is also illuminated this signals that the braking system has malfunctioned and your brakes may not work properly. In this case the Electronic Brake Force Distribution (EBD) warning light may also be illuminated. Can I still drive with my parking brake and brake fluid light on?

How does the ABC system work in a Mercedes?

In the ABC system, a computer detects body movement from sensors located throughout the vehicle, and controls the action of the active suspension with the use of hydraulic servomechanisms.

When did the SL500 body style come out?

This R129 body style SL500 was made from 1990 through 2002. It was called the 500 SL from 1990 – 1993. They all have just about the same suspension regardless of year or package. The “sport” packages are just trim and tires, not suspension, engine or drivetrain.

When did I get ABC on my Mercedes SL500?

What does drive carefully mean on Mercedes Benz?

“Drive Carefully” appears for a few seconds when hitting a bump or dip in the road. This may or may not be accompanied by fluid overflowing from the reservoir. One or more of the accumulators has failed and is no longer supplying pressure to help fill the struts when needed. Start paying close attention to the fluid level in the reservoir.

Navigation