What type of oil does a 2002 Honda Accord take?
Pour 5 quarts of 5W-30 oil into the funnel. Make sure to use 5W-30 oil. Though using slightly different grades will work, it is best to use the type stated in your owner’s manual. Screw the oil filler cap back in place.
How to change the oil in a Honda Accord EX?
Oil & Filter Change Honda Accord (1998-2002) – 2000 Honda Accord EX 2.3L 4 Cyl. Sedan (4 Door) 1. Getting Started – Prepare for the repair 2. Open the Hood – How to pop the hood and prop it open 3. Find Oil Drain – Locate the oil drain plug underneath the vehicle 4. Drain Oil – Set up the workspace, drain oil and replace plug 5.
How to do an oil and filter change?
Oil & Filter Change Honda Accord (1998-2002) – 2000 Honda Accord EX 2.3L 4 Cyl. Sedan (4 Door) 1. Getting Started – Prepare for the repair 2. Open the Hood – How to pop the hood and prop it open
What to do if your Honda Accord has metal flakes in it?
Metal flakes in your oil could indicate a serious problem inside your engine. While the oil is draining, wipe down the drain plug with a clean rag or towel and remove the drain plug gasket. Replace the drain plug gasket with a new one, making sure that the new gasket fits over the threads and sits against the head of the bolt.
How to change the oil in a Pontiac G5?
Open the Hood – How to pop the hood and prop it open 3. Find Oil Drain – Locate the oil drain plug underneath the vehicle 4. Drain Oil – Set up the workspace, drain oil and replace plug 5. Find Oil Filter – Locate the oil filter 6. Remove Filter – Position drain pan and remove the oil filter 7.
How to know if your Honda Accord needs an oil change?
Position an oil drain pan underneath the drain plug and loosen the drain plug by hand until it is free and oil begins to flow out of the oil pan. Watch the draining oil for shiny specks. Metal flakes in your oil could indicate a serious problem inside your engine.
Where is the oil filter on a Honda Accord?
The engine oil filter is located on the back of the engine, almost directly above the drain plug. Move the oil drain pan so that it is underneath the oil filter. Unscrew the oil filter by turning it counterclockwise until it comes free of the threads on the engine.
Metal flakes in your oil could indicate a serious problem inside your engine. While the oil is draining, wipe down the drain plug with a clean rag or towel and remove the drain plug gasket. Replace the drain plug gasket with a new one, making sure that the new gasket fits over the threads and sits against the head of the bolt.
Where to put the Jack on a 1998 Honda Accord?
This procedure is correct for all 1998-2002 Accord models equipped with the 2.3L inline 4-cylinder engine. Since the jacking location on the Accord isn’t large enough to fit both a jack and a jack stand, you must raise the car by placing the jack on the front subframe.