What to do if your WPS light is not flashing?
NOTE: If the WPS or Wi-Fi LED is not flashing, Configure your Range Extender with the QRS Mobile Setup. Step 3: Once confirmed the WPS/Wi-Fi light is blinking on your router, within one minute press and hold the WPS button on the DAP-XXXX, range extender for 2-3 seconds.
How to print MMU2S LEDs with rapid flashing?
Insert the filament back into the white PTFE tube Press the middle button to start the loading sequence Push the filament until it’s caught by the drive gear If the LED turns red and green, press the right button for 1-2 seconds to continue the print If the LED turns red, repeat the process. Rapid flashing during print
What does rapid green flashing light on Finda mean?
Rapid green flashing light (after pressing the middle button)- The filament loading sequence. This sequence won’t stop until FINDA senses the filament flowing through or the user cancels the operation pressing the middle button.
What does red flashing mean on printer led?
Press it once and wait for the printer to finish the auto-check procedure. If the procedure finishes correctly, the LED above the affected filament will turn to red-green flashing, if the procedure fails it will remain red. To continue after fixing the issue, press the right button.
Why is the power button blinking red on my FlexRadio radio?
When booting up your radio, if the cooling fan is not spinning fast enough to provide adequate airflow to cool the PA, CPU, FPGA, and SCU (s), the PSoC will report the error which results in the radio firmware shutting down and the power button blinking red once and then repeating.
Why does my flash drive have a red light?
When your flash drive is blinking red, or your flash drive suddenly starts to show a red light, which is not it’s a normal color pattern. Whenever you notice the light on your Flash Drive behaving abnormally, you should certainly take the initiative to fix your Drive and get it working properly again.
Why is the FLEX-6000 radio not working properly?
The FLEX-6000 has the ability to detect a variety of faults that could potentially harm the radio and one of these is detecting if the cooling fan is working properly.
Why is the red light on my mobility scooter blinking?
I don`t think the blinking red light is an indicator of a fault, but rather a signal to indicate that current is present. The fact that it blinks at the same rate as the indicator is because they use the same timer chip.