What to do if your Mitsubishi Magna wont start?
Get a helper disconnect a sparkplug wire or 2 and ground it to the engine atleast 3/16 away from ground-have helper crank engine over-do you have a snapping blue spark?
How to adjust throttle control or Mitsubishi Magna?
Ensure all vacuum components are functioning properly. Turn ignition on with engine off for 10 seconds. Turn ignition off for 10 seconds. Start engine and idle for 30 seconds. Slowly vary engine speed between idle and 3500 RPM 5 times. Return engine to idle.
Why does my TF Magna engine not start?
Had this problem for quite some time, very similar. The engine will not start when it is warm. Recently it started dying when the engine got too warm. It is a sensor that won’t work when the engine is (too) warm, and there are two of these sensors.
What kind of engine does a Mitsubishi Magna have?
Look up between the bumper and the support panel and you should see it. Your consumption is about right for that model Magna. It’s a relatively large and heavy car with a big, powerful V6, and 2001 engine technology. They aren’t a popular car today; they don’t have the safety, economy, or appeal of other, newer cars.
Why does my 1997 Mitsubishi Magna not start?
1997 Mitsubishi Magna Wont Start Sometimes: Engine Turns Over but Engine turns over but wont fire, hot or cold doesn’t seem to matter, my mechanic was told it was earthing problem, he cleaned all earths from body to engine and elswhere, didn’t do it for three months and then did it again the other day.
Ensure all vacuum components are functioning properly. Turn ignition on with engine off for 10 seconds. Turn ignition off for 10 seconds. Start engine and idle for 30 seconds. Slowly vary engine speed between idle and 3500 RPM 5 times. Return engine to idle.
Why is idle speed not okay in a Mitsubishi Magna?
If idle speed is not okay after cycling system, problem is usually caused by a dirty throttle plate or vacuum leaks. Ensure all vacuum components are functioning properly. Turn ignition on with engine off for 10 seconds. Turn ignition off for 10 seconds. Start engine and idle for 30 seconds.
Had this problem for quite some time, very similar. The engine will not start when it is warm. Recently it started dying when the engine got too warm. It is a sensor that won’t work when the engine is (too) warm, and there are two of these sensors.