What to do if Airmatic system fails in Mercedes Benz?
However, if you have some experience, some of the methods listed below can be useful to troubleshoot your issue: Inspect the AirMatic relay in the engine compartment’s main fuel box. Inspect the fuse for the air suspension compressor. If fuse regularly blows, purchase and install a new relay.
Where is the fuse on a Mercedes W211?
It is in the front passenger’s footwell. It is behind the trim panel on the left side of the trunk. It is near the battery under the trunk floor.
What should the fuse look like on Mercedes Benz air suspension?
Procedures are similar for other Mercedes-Benz with air suspension, but the location of the relay and fuse may change. In this S-Class W220, the air compressor motor /pump is protected by Fuse 32, which is a MaxiFuse 40 Amp. Here is what a good fuse should look like.
What causes a Mercedes Benz air suspension to fail?
Faulty relay or Blown Fuse The air suspension compressor relay is known to fail. It could either not engage the air suspension compressor at all or even worse keep it engaged for longer that required. If the air suspension compressor is kept engaged for too long, it can get damaged.
Procedures are similar for other Mercedes-Benz with air suspension, but the location of the relay and fuse may change. In this S-Class W220, the air compressor motor /pump is protected by Fuse 32, which is a MaxiFuse 40 Amp. Here is what a good fuse should look like.
It is in the front passenger’s footwell. It is behind the trim panel on the left side of the trunk. It is near the battery under the trunk floor.
Faulty relay or Blown Fuse The air suspension compressor relay is known to fail. It could either not engage the air suspension compressor at all or even worse keep it engaged for longer that required. If the air suspension compressor is kept engaged for too long, it can get damaged.
When to replace fuses on Mercedes Benz E class?
Location of fuses and relays on Mercedes Benz E Class All Models, years 2003 to 2008. If you replace any fuses, make sure to replace it with the same color fuse. If there is an underlying problem you could overload the wires or even cause more serious problems to that circuit if you use a higher ampere fuse.