What size socket for knock sensor?
Re: Need help with a socket size on knock sensor Most engine sensors are 7/8″/22 mm. 7/8″ and 22mm are the same size. Try a 13/16″/21mm (close match) or a 3/4″/19mm (near exact match).
What size is a honda knock sensor?
Re: What size socket for knock sensor??? Thanks ekb16 for the reply (well and everyone else), it is 27 mm.
What size socket for RSX knock sensor?
24mm if memory serves correctly.
What are the best parts for a Honda Civic?
Other parts such as cabin air filter, emblem, headlight and fog light and so on also should get maintained regularly. If you cherish your Honda Civic enough, then you must know the OEM Honda Civic auto parts are best for it.
What can I do about the bumper hanging off my Honda Civic?
With our large selection of hardware replacement parts for Honda and Acura automobiles, you can easily fix up old clips and fasteners. Minor fender bender in your Honda Civic that left your bumper hanging off?
How big are the retainers on a Honda Civic?
Weatherstrip Retainers Honda Acura Orange Nylon Weatherstrip Retainer Head Diameter: 5mm x 15mm Stem Diameter: 6mm Stem Length: 10mm Replaces Honda 91530-SP1-003 Acura 3.5RL, Honda Accord, Civic & Odessy 1992 – 25 Per Package
What are the bolts on a Honda Civic?
The rear transmission mount is held in by a 17mm bolt and the starter has two 14mm bolts, a wire clip, and a 12mm cable nut. The slave cylinder assembly is held in place by two 12mm bolts. Figure 11. Remove bolts for rear torsion mount.
How do you replace the clutch on a Honda Civic?
The rear transmission mount is held in by a 17mm bolt and the starter has two 14mm bolts, a wire clip, and a 12mm cable nut. The slave cylinder assembly is held in place by two 12mm bolts. Figure 11. Remove bolts for rear torsion mount. Figure 12. Remove the starter bolts. Figure 13. Remove the clutch line bracket. Figure 14.
Other parts such as cabin air filter, emblem, headlight and fog light and so on also should get maintained regularly. If you cherish your Honda Civic enough, then you must know the OEM Honda Civic auto parts are best for it.
Where is the pressure plate on a Honda Civic?
Take the pressure plate and mount it on top of the clutch plate. Position the pressure plate so the three studs on the flywheel are visible. Once fitted, tighten the pressure plate bolts to 19 ft/lbs using a criss-cross pattern.