What size engine do I have by VIN?
Your VIN number is your vehicle identification number and you can find your engine size by VIN number. In the series of numbers and letters, the tenth from the left denotes the model year and the eighth is the engine codes. Just tell the store clerk those two characters and you’re in business.
How do I tell what gear ratio my VIN is?
The gear ratio is usually listed in the VIN code located on driver’s door, the glove box, or the ID plate on the dashboard. Count the times a rear wheel goes around for one driveshaft turn: if its 3 1/2 it’s a 3.50:1. Divide the number of teeth on the ring gear by the number of teeth on the pinion gear.
What are the different engine sizes?
Engine Size Chart
| Liters (L) | Cubic Centimeters (CC) | Cubic Inches (CID) |
|---|---|---|
| 4.3 | 4,343 | 265 |
| 4.4 | 4,376 | 267 |
| 4.8 | 4,786 | 292 |
| 4.9 | 4,917 | 300 |
How do you find the rpm of a gear ratio?
The general rule is – large to small gear means ‘multiply’ the velocity ratio by the rpm of the first gear. Divide 60 teeth by 30 teeth to find the velocity ratio. Multiply this number (2) by the rpm (120). This gives an answer of 240rpm.
What are the different types of hydraulic gear motors?
ALM 3 series: hydraulic gear motors with displacement from 22 to 87 cm³/rev. max. speed 2,000 to 3,500 rpm, flow at 1500 rev/min 31 to 124 litres/min, depending on model. GHM 1 series: hydraulic gear motors with displacement from 2.8 to 11.0 cm³/rev. max. speed 2,200 to 5,000 rpm, flow at 1500 rev/min 3.9 to 15.7 litres/min, depending on model.
How big is a 3Z hydraulic gear motor?
The 3Z Motor series has high flow and low pressure drop across a wide speed range. Designed for use underwater or in corrosive environments, all external metal surface parts of the TS Series motor are stainless steel. Side load capacity 300 lb. Intermittent pressures to 2400 psi, torques to 2000 lb-in. Shaft is 1inch diameter.
What are the specifications of a hydraulic motor?
Description: reversible hydraulic motors in series when the spool is out and in parallel when the spool is pushed in. SPECIFICATIONS Maximum Operating Pressure ….. 2500 psi Flow Rating …..40 GPM Filtration: For general purpose
How big is the shaft of a Parker hydraulic motor?
Shaft size is 1.25 inch nominal. With increased power and durability, the Parker Torqmotor™ TG Series low speed high torque (LSHT) hydraulic motor is available in flange or wheel mounts. Torques to 12,600 lb-in and displacements to 58.5 cu in. Shaft sizes to 1.375-inch nominal.