What size ductwork do I need for 1200 cfm?
10”
The higher the cubic feet per minute, the larger the duct you’ll need. At 600 CFM, the minimum duct size is 6”. At 900 CFM, the minimum duct size is 8”. Finally, at 1200 CFM and above, consider a 10” diameter duct or larger.
Does reducing duct size increase cfm?
A little flatter at the reduction. Overall, pretty similar and both really interesting to look at. The key takeaway here is that air moves from a larger to a smaller duct, the velocity increases. In both cases, the flow rate — the amount of air moving through the duct, in cubic feet per minute — stays the same.
How do you calculate duct size for ventilation?
To calculate the required equipment size, divide the HVAC load for the entire building by 12,000. One ton equals 12,000 BTUs, so if a house or office needs 24,000 BTUs, it will take a 2-ton HVAC unit. If you get an uneven number, such as 2.33 for a 28,000 BTU load capacity, round up to a 2.5-ton unit.
What size should my return air duct be?
Generally, if you are using a Duct Sizing Chart or calculator (such as the Trane Ductulator), size the re- turn ducts for 0.05 inches/100 ft (0.40 Pa/m) based on the expected airflow through that return air duct. The total sum of air from all the returns should be at least 250 CFM/nominal ton (33 l/s per-kW).
Can a supply air duct be too big?
The Ducts Are Too Large Not much. This is what happens when your air ducts are too big for your system. Your system pushes air into the ducts, but the ducts are too large for it to build up any sustained amount of air pressure, and thus a “forced air” system doesn’t have any force.
What happens if duct is too big?
Using oversized ducts will erode the system’s efficiency, while undersized ducts won’t carry the necessary volume of air. Balanced airflow. To maintain neutral pressure in the HVAC system and throughout the house, the duct system must deliver and return a matching volume of air.