What size does Hardie soffit come in?
HardieSoffit® panels are 2,438mm (8 ft) and 3,658mm (12 ft) long, 6mm (¼ in) thick factory-primed fiber-cement panels designed to be used on the underside of eaves as soffit material. HardieSoffit panels are available as vented or non- vented boards.
Is Hardie board good for soffit?
HardieSoffit® panels are 8 ft. and 12 ft. long, ¼ in. thick factory-primed fiber-cement panels designed to be used on the underside of eaves as soffit material.
What size do Hardie panels come in?
HardiePanel vertical siding is 5/16 in. thick and is available in 4×8, 4×9 and 4×10 sizes. Please see your local James Hardie dealer for texture and size availability. HardiePanel vertical siding is available as a prefinished James Hardie® product with ColorPlus® Technology.
How much does Hardie soffit weigh?
Weight: 1.8 lbs./sq. ft.
What gauge is aluminum soffit?
023 gauge eavestrough is our most common thickness on most residential applications. We do recommend the .
How much does a 4×8 sheet of Hardie panel weigh?
In respect to this, how much does a 4×8 sheet of Hardie board weigh? Hardieplank weighs 2.3 lbs per square foot…….How much does a 4×8 sheet of Hardie plank weigh?
| Series Name | HZ10 HardiePanel |
|---|---|
| Actual Width (Inches) | 48 |
| Coverage Area (Sq. Feet) | 32 |
Can James Hardie lap siding be installed vertically?
HardiePanel vertical siding may be installed on vertical wall applications only. DO NOT use HardiePanel vertical siding in Fascia or Trim applications. The designer and/or architect shall take into consideration the coefficient of thermal expansion and moisture movement of the product in their design.
Do you caulk soffit?
Similarly, you should avoid caulking the bottom edges and joints of your fascia trim and soffits. Any water that doesn’t get into the gutters can be trapped in these areas if they’re sealed off.
How do you cut Hardie plank soffit?
Cut using shears (manual, pneumatic or electric) or the score and snap method, not recommended for products thicker than 7/16 in. – DO NOT dry sweep dust; use wet dust suppression or vacuum to collect dust. – For maximum dust reduction, James Hardie recommends using the “Best” cutting practices.
How wide is soffit material?
16 to 24 inches wide
Soffits usually range from 16 to 24 inches wide. For instance, CertainTeed Ironmax soffits may span 24 inches without additional nailing strips, if permitted by code rules.
What is soffit vent?
Soffit vents are roof ventilation devices installed underneath the eaves of a roof that extend past the warm wall line. When properly combined with other roof ventilation devices, soffit vents allow fresh air to enter into an attic creating air flow. There are two types of soffit vents: Continuous and individual.
What kind of siding does James Hardie make?
James Hardie HardieSoffit Cedarmill Vented Soffit Panel is a fiber cement siding soffit designed to mimic the look of real wood siding with less maintenance, better wear and a long life. HardieSoffit panels are Engineered for Climate and designed to hold up to the changing weather conditions in the environment where it is installed.
What do you use a James Hardie backer for?
James Hardie HardieBacker 1/4 in. Cement Board is a cement backerboard designed for use with floors and countertops. Works under interior floors to provide a solid foundation for tile, vinyl, wood and other flooring. 1/4 in. Cement Board will also work as a countertop backerboard and underlayment for tile, granite and other stone surfaces.
When to use James Hardie Hardies Offit hz10?
Use on the underside of eaves where a vented soffit is required for roof areas. HardieZone System engineering means it is made to withstand the specific weather conditions of the area where it is installed. HZ10 formulated soffit is made to withstand high temperatures, humidity, moisture, sun, hail, tropical storms and hurricane winds.
How does James Hardie primed for paint collection work?
James Hardie’s primed for paint collection gives you the power to choose paint for your home’s exterior. It’s primed. It’s ready for field painting. It’s a durable, high-performance canvas. Add a rough-textured, stucco look using the Knockdown finish. Shiplap joints create v-grooved architectural lines on your home to add visual interest.