What should you do if your timing belt is bad?

Since the timing belt is so critical to the operation of your vehicle, if you notice this warning sign, you should contact a mechanic as soon as possible. 2. Engine won’t turn over If the timing belt has broken inside, the engine will not be able to turn over or ignite.

Where can I find a rubber timing belt?

Rubber timing belts are found in the vast majority of engines found in small cars and SUVs, particularly 4 cylinder – but some cars don’t have timing belts. In larger engines that put out more power the timing belt is replaced with a timing chain, which looks much like a bicycle chain.

Why does my timing belt make a rattling noise?

The rattling noise can come from any number of things. Check the accessory belt for any bad tension, the exhaust manifold protection, the exhaust hangers, the engine mounts, and finally the engine itself for any problems. Thanks! I have a 2001 Toyota Sienna.

What does it mean when your timing belt is squeaking?

You hear squeaking noises from the vicinity of the timing belt cover: A sure sign that the belt is starting to give way under the stress of prolonged use, this is a signal that you need to have your timing belt inspected and, quite possibly, replaced.

When do I need to change my timing belt?

Most models, like those with 3.2-liter engines, do not need their timing belt replaced until they hit 92,000 miles or after six years, whichever comes first. Others can go as long as 105,000 miles before the belt has to be replaced. Most Audis have a recommended timing belt replacement at 110,000 miles.

What are the indicators of a bad timing belt?

Ticking noise coming from the engine. The timing belt is attached by way of a series of pulleys to the engine’s crank and cam shaft. The crankshaft powers the engine’s connecting rods which are attached to pistons inside the combustion chamber. The camshaft operates the cylinder head valves and rocker arm assembly, which…

What’s the average life of a timing belt?

Depending on what schedule you may read, including information distributed by the manufacturers themselves, the average life span of a timing belt is between 60,000 and 105,000 miles or after 7 to 10 years regardless of mileage. Most manufacturers state that going more than 80,000 to 90,000 miles on the original belt is flirting with danger.

What makes an engine run without a timing belt?

In a nutshell, your engine won’t run without a fully functional timing belt. The timing belt rotates the engine’s cam and crankshaft in sync to ensure each cylinder fires at the right time. The timing belt controls the action of the pistons and valves inside the engine cylinders to ensure the valves open in perfect time with the pistons.

Why does the timing belt make a ticking sound?

When the timing belt starts to wear out, it may create a ticking sound inside the motor. This warning sign may also be an indication of low oil pressure or the engine not having the proper amount of lubrication.

When did Toyota stop using the timing belt?

The V6 version of the Tacoma was using the timing belt until the year 2004 when it too got a timing chain. Toyota Tundra: The V6 and V8 version of the Toyota Tundra used belts in the early 2000s. The V6 switched to a chain in 2005.

How much does it cost to replace timing belt?

Even though the cost of getting your timing belt replaced can be anywhere from $500 to as much as $1,000, when compared to the damage that your engine can face as a result It’s about that drastic.

What to do when your timing belt makes noise?

Remember the timing belt drive may not be the only source for noise. To eliminate the timing belt as the noise problem, spray it with soapy water while it is running. If the noise goes away or decreases, then the timing belt is part of the problem. If the noise is still evident, then the problem is likely due to other drive components.

Can a worn out timing belt cause a fire?

Engine misfires A worn out timing belt might also impact the engine’s fire rate. The timing belt is attached to pulleys that drive the crank and camshaft as we’ve indicated above. However, sometimes the belt will slip on the camshaft drive and cause one cylinder to open or close earlier than it should.

What are the symptoms of a faulty timing belt?

Why does it cost so much to replace timing belt?

The labor is what drives up the price. It takes forever to get to the timing belt and while everything is opened up, they recommend seals, other belts, tensioner, etc. It will likely save you money in the long run by doing all these things all at once.

Is the timing chain the same as the timing belt?

Since the inception of the internal combustion engine, one constant has remained – all of them have a timing chain or timing belt. Most higher-displacement engines have a timing chain as opposed to a timing belt.

When did Honda Pilot timing belt come out?

Changed out Honda Pilot Timing Belt at 101000 miles. CEL, VSC, VTM lights all came on as I pulled out of garage. Did battery disconnect reset. Drove 60 miles, CEL and VSC came on. Reset again and drove a bit. Came on again. Then CEL started flashing and car shuddered.

When do you change the timing belt on an Acura?

Acuras have one of the longest intervals for timing belt replacement. Most models, like those with 3.2-liter engines, do not need their timing belt replaced until they hit 92,000 miles or after six years, whichever comes first. Others can go as long as 105,000 miles before the belt has to be replaced.

Can you drive if the check timing belt light comes on?

There is an idiot light on certain cars that comes on when you reach the mileage where timing belt replacement is due… so to answer your question… can you drive with the light on….yes… but know that you’re on borrowed time, and the timing belt is likely at the end of it’s useful life and should be replaced as soon as possible….

What was the last test for a timing belt?

Last test before dealer, checked timing belt job. Appeared front cam off one tooth. Reset belt and ran engine a few minutes. Checked again and all lined perfect. All lights now out. It is hard to get the tension to the right as you install the belt.

When to change timing belt on Honda Civic?

I had my timing belt changed for my 2001 Honda Civic on Friday at 110K miles. Before I took the car into the shop, there were no problems. Ten minutes after driving away, the check engine light came on, and the car had trouble running and starting later in the day.

What causes the timing belt to go bad?

A faulty transmission control module may cause a delay in acceleration or erratic shifting of gears. The transmission control module has various sensors such… Hello. Most of the time, this is the first indication that the timing belt is failing. The timing belt needs to be checked to see if it is going bad.

What should I do if my timing chain is making noise?

Use a socket and breaker bar to attach to the center bolt on the belt tensioner pulley. Turn it clockwise to unload the belt tension and then slip the belt off the pulley. Start the engine. Use the stethoscope to listen for noise at the timing chain cover.

What does the pulley on the timing belt do?

The snakelike timing belt on the side of the engine is essential for maintaining your car’s performance. It is controlled by a round pulley called a tensioner that keeps the line taught as it rotates. More often than not, the tensioner goes bad before the timing belt does.

Can a bad timing belt cause engine damage?

However, if the issue is due to the timing belt being broken, it may also result in other internal engine compartment damage. In many cases, the timing belt will break while the engine is running.

Can a timing belt be replaced with a timing chain?

The timing belt is commonly found in cars and SUVs with smaller displacement engines. When an engine has a larger bore and stroke, most automotive manufacturers utilize a timing chain system that replaces the rubber belt with a metal chain. Generally, timing chains last longer than timing belts, with some rated to last the lifetime of the car.

What is the frequency of the timing belt?

Meshing frequency is assumed to be the primary frequency of noise generated by timing belt drives since the noise is generated from meshing interference and land impact during operation. Meshing frequency is defined as the number of timing belt teeth that enter and exit the timing belt pulley grooves per unit of time.

How is the timing belt attached to the engine?

The timing belt is attached by way of a series of pulleys to the engine’s crank and cam shaft. The crankshaft powers the engine’s connecting rods which are attached to pistons inside the combustion chamber.

How often should you change the timing belt on a Honda Civic?

You should be getting a new timing belt every seven years. If the cost is too high, you might consider selling the car. replace immediately. I have a 2000 Civic with 233k miles. Runs like a champ. Chain was not introduced until 2006 MY

What happens if the timing belt slips on a car?

This will quickly dump pressure from the combustion chamber, resulting in an incomplete fuel burn and raw hydrocarbons escaping from the exhaust port. On a computer-controlled car, the oxygen sensor will detect this excess of fuel and the computer will reduce the amount of fuel injected to compensate.

When do you delay timing belt replacement by 7 years?

When you delay timing belt replacement by at least 7 years, your car is NOT “well-maintained”. So, to answer the OP’s question, not only are you tempting fate, but you are also ignoring very clearly-stated advice from the folks who designed and manufactured your car.

When did Honda start using a timing chain?

It happened 2 days before our appointment. As for Civics, they only started to use chains in 2006, starting with the 8th generation. With accords and other 4 cylinders, I can’t remember off the top of my head but my 2005 accord 2.4 had a timing chain.

What happens when your timing belt gives up the ghost?

Your engine’s timing belt is the most important maintenance item in your car. What happens when this component gives up the ghost, and how hard is it to fix by yourself? What Is A Timing Belt? A timing belt is the ribbed belt that is placed in a specific configuration along one side of your engine to keep the crank and camshafts timed properly.

Where to find the TDC mark on a timing belt?

(2b) The flywheel pulley TDC mark is accessible through a hole in the bellhousing. (2c) The camshaft TDC is easy to find — especially if you add white paint as we did. We cannot stress this enough: Be careful!

What happens when a timing belt goes bad?

Timing belt failure comes in three flavors: stretching, worn teeth and snapping, generally in that order. All timing belts stretch, and most of that stretch occurs about 15 minutes after installation.

Where are the timing marks on a timing belt?

(2a) Find the timing marks on the flywheel and cam, and set them both to TDC. (2b) The flywheel pulley TDC mark is accessible through a hole in the bellhousing. (2c) The camshaft TDC is easy to find — especially if you add white paint as we did.

Where are the timing marks on the crankshaft?

For the crankshaft below, there probably will be a timing mark on the damper pulley that lines up with another mark on the lower cover. Or, the service manual may direct you to the transmission end of the engine to look through a hole in the bellhousing for a timing mark on the flywheel.

How do you remove a timing belt from a car?

This tensioner may be an automatic hydraulic type that you simply crank in one direction to remove the old timing belt. Or, you may have to loosen the tensioner pulley adjustment bolt to release the tension and the belt. Before proceeding, confirm which way the engine rotates during normal operation.

Why is my Honda Pilot cranking but not starting?

There are a lot of issues that can cause your Pilot to crank, but not start. The engine needs air, fuel, and a spark in order to run. It is highly likely that if the engine is cranking, but not starting that it has thrown an OBDII code.

What’s the battery voltage on a Honda Pilot?

Voltmeter shows across battery terminals: 14.2 V when engine is running; 12.8V when engine not running. Any suggestions as to my problem?? My symptoms seem very similar to first poster.

Why is my timing belt light not working?

The correlation fault is saying that the crankshaft position in comparison to the bank 2 cylinder head camshafts is not reading the same. The front cover will have to be removed and timing checked again.

Where is the timing belt located on a car?

Timing Belt Replaced–Check Engine Light Afterwards. But, on most engines it is located in the same area as the crankshaft nose where the cam timing belt is located. Some actually use the crankshaft cam cog wheel to generate the signel. It is possible that something was not assembled correctly or the sensor was damaged during the replacement.

Can a bad timing belt cause a Chevy Cruze to not start?

They are most commonly found on four cylinder engines. Here are some of the most common signs of a bad timing belt on the Chevy Cruze: Engine Won’t Start – If your Cruze’s timing chain or belt has fallen off completely, broken, or has jumped a few teeth, it is entirely possible that the engine won’t even start.

Why did my water pump break while replacing the timing belt?

They admitted that while replacing the timing belt, one of the other belts also being replaced (with the water pump) had broken and damaged the sensor in some way (the mechanic admitted to this, but the front desk guy had led me to believe otherwise).

What are the signs of a bad timing belt?

Here are some of the most common signs of a bad timing belt on the Chevy Cruze: Engine Won’t Start – If your Cruze’s timing chain or belt has fallen off completely, broken, or has jumped a few teeth, it is entirely possible that the engine won’t even start. You might hear it slapping around as the engine cranks over.

Can a bad timing chain cause an engine to fail?

3. Engine won’t start or fails. A broken timing chain will cause an engine to not start or fail while driving. If the belt is already broken, the engine won’t have enough compression to start. If it breaks or jumps while driving, the pistons will be damaged from contact with the valves.

Why does my car vibrate after a timing belt change?

This is easy to do as the engine tends to shift and rotate and it can be difficult to get it back in the exact orientation so that the engine mount goes back on like it was before it was removed. If it isn’t on correctly, there could be a gap which allows the engine to vibrate more than before. edit: oh, I should add a third possibility.

What should I do if my timing belt is bad?

If the timing belt is very close to its last days, you might hear the timing belt slamming against the covers. If you hear this sound from an area close to the timing belt, you should imminently shut off your engine and not start it before you have checked if the timing belt is causing this problem.

Why does my car vibrate when I idle?

If either of these belts is worn or damaged, a rough idle is a typical result. Serpentine belts are easier to diagnose and easier to replace. Simply open the hood and identify the largest rubber belt around the front of your engine.

How much does it cost to replace a timing belt?

The cost of replacing the timing belts very heavily depends on the make and model of the vehicle that you’re driving, as well as the mechanic you take it to. Some timing belt replacements could be as cheap as $300 to $500 to get done, while others can stretch to upwards of $1,400 to $2,000.

When to replace your timing belt in Utah?

Warning Signs to Replace Your Car Timing Belt at West Jordan, Utah. Your vehicle’s mileage is the best indicator a new timing belt is needed. Most of us don’t even think about it until there’s a problem, but there are warning signs for a bad timing belt that you shouldn’t ignore.

How often do you need to change your timing belt?

Some manufacturers recommend changing the timing belt every 60,000 miles, others recommend longer intervals. The timing belt connects the crankshaft to the camshafts so valves open and close at the right time.

The average cost for a timing belt replacement is between $498 and $669 . Labor costs are estimated between $319 and $403 while parts are priced between $179 and $266 .

How long does it take to change the timing belt?

Replacing a timing belt can take as little as two hours and as much as six hours, depending on the skill of the mechanic, the make of the vehicle and any additional existing problems.

When should I have my timing belt replaced?

If your car has a timing belt, it’s important that you inspect it regularly to ensure that it’s in proper working order. This small part is critical to your engine running properly, and if it breaks the results can be catastrophic. Your timing belt should be replaced every 50,000–70,000 miles, depending on your car’s make and model.

Why does my timing belt make a ticking noise?

If there is any problem with the timing belt, it will create a ticking noise from inside the motor. This ticking noise will also happen if the engine doesn’t have enough the proper amount of lubrication or low oil pressure.

How often should you check your car belt?

The dry air causes the rubber to become brittle more quickly and this can cause the belt to crack or snap. If you regularly drive in a dry climate then you should have your belt checked more often than every 60,000 miles, just to be on the safe side.

What are the symptoms of a timing belt going bad?

Let’s look at some of the symptoms of a bad or failing timing belt: 1. Engine runs poorly: A worn timing belt can slip, getting out of the proper alignment. 3. Ticking sound coming from engine: A failing timing belt can cause a ticking noise when the car is running.

What are the benefits of replacing a timing belt?

Increase in Horse Power. Taking your vehicle to a timing belt replacement shop and changing the timing belt as scheduled will benefit you in many ways.
Better Fuel Economy. Changing the timing belt when needed will dramatically increase your gas mileage.
Lower Auto Repair Cost.

When to replace timing belt?

Every car manufacturer recommends replacing the timing belt after a given time, and it is imperative to take this advice. The time or distance between timing belt replacement depends on the specific make and model of the vehicle, but on average it should be changed every 100,000 miles.

How much to fix timing belt?

Typical costs: Having a mechanic or repair shop replace the timing belt (and possibly the serpentine belt and accessory belt at the same time) can cost $150-$1,000 or more, depending on the make, model and type of vehicle.

What kind of pulley does the timing belt use?

The timing belt runs on pulleys, known as idler pulleys, and is kept under the correct tension via the timing belt tensioner. The timing belt can also run the water pump, injection pump and the oil pump on some engines.

Why is the knocking more noticeable after a belt change?

Before the timing belt change there was a slight knocking from one of the cylinders. After the belt change the knocking is more pronounced. Q. How concerned should I be that the knocking is more noticeable?

How are timing belts connected to the crankshaft?

By definition a timing belt is a toothed belt that connects the camshaft or shafts to the crankshaft thus “timing”the top and bottom of the engine. The camshafts turn at exactly ½ of the speed of the crankshaft to time the valve operation to the piston operation.

What are the signs of a bad timing belt on a Chevy Equinox?

Here are some of the most common signs of a bad timing belt on the Chevy Equinox: Engine Won’t Start – If your Equinox’s timing chain or belt has fallen off completely, broken, or has jumped a few teeth, it is entirely possible that the engine won’t even start. You might hear it slapping around as the engine cranks over.

How many miles can you go on a timing belt?

Most manufacturers state that going more than 80,000 to 90,000 miles on the original belt is flirting with danger. This seems to be very straight forward and easy to comprehend but here is what the manufacturers do not tell you.

How long does it take to change a timing belt?

As a service provider it is my duty to explain this concept to you the consumer. Many times it is a 4 or 5 hour job to change a timing belt, by not doing the job right and replacing all of the tensioners, idler pulleys and the water pump at the same time puts you, the consumer in harm’s way.

Are there any downsides to a timing belt?

Timing belts are quiet, their production costs are relatively less than chains and sprockets, and they are light and needs no lubrication to function. The downside is that belts need to be replaced at specific mileage or time limits.

How many miles is the timing belt on a Ford?

There is almost no accessibility to a couple of the bolts that attach the mount to engine. Though Ford hasn’t made the Probe for several years, there are still a lot of them on the road and many have well over 100,000 miles on the original timing belt.

By definition a timing belt is a toothed belt that connects the camshaft or shafts to the crankshaft thus “timing”the top and bottom of the engine. The camshafts turn at exactly ½ of the speed of the crankshaft to time the valve operation to the piston operation.

What happens if you take the timing belt off an engine?

Warning: If you know you’re working on an interference engine, do not rotate the camshaft or the crankshaft independently while the timing belt is off the engine. You could cause the pistons to hit the valves, or vice versa, and cause the same damage as if the timing belt had snapped with the engine running — bent valves!

Where is the timing belt on a transverse 4 cylinder engine?

On most transverse four-cylinder engines, you’ll have to remove the passenger-side motor mount in order to gain access to the timing belt. This means the entire powertrain needs to be supported in that area while you’re working. And finally, getting to the lower portion of multipiece timing belt covers usually requires underbody access.

How much does it cost to change your timing belt?

A typical job would be around $450. If you do it yourself on a car that is relatively forgiving, the parts cost for good quality components would be around $250 or less, so taking a day and doing it yourself would be well worth it. How Do I Change My Timing Belt?

Where is the timing belt on a Subaru?

With most cars, timing is set to top dead center on number 1 piston. But on a Subaru with their funny horizontal boxer engine, it is set at mid-stroke. For those not familiar, I will explain what that means later.

When did you install the timing belt on your car?

When you installed the timing belt, did you align the marks on the crankshaft and camshaft pulleys, turn the engine over manually a time or two, and verify the marks were still properly aligned? These steps are vital to getting this job right.

(2b) The flywheel pulley TDC mark is accessible through a hole in the bellhousing. (2c) The camshaft TDC is easy to find — especially if you add white paint as we did. We cannot stress this enough: Be careful!

How to get my timing back correct after?

3. Install the timing belt (4) starting at the crankshaft sprocket (10) going in a counterclockwise direction. Install the belt around the last sprocket and maintain tension on the belt as it is positioned around the tensioner pulley (11).

How can I tell if my timing belt is leaking?

These marks may also be displayed on a label on the timing belt cover on some engines. Check the area around the belt for signs of oil leakage. Look around the camshaft and crankshaft seals, as well as the valve cover and oil pan. Check for coolant leaks from the water pump and water pump by-pass hose.

Can a harmonic balancer be removed from a timing belt?

Determine if the harmonic balancer pulley needs to be removed to remove the timing belt cover. Often, the cover saddles over the end of the crankshaft, and this pulley will not allow you to remove the cover without first removing it.

What’s the difference between timing belt and timing chain?

When an engine has a larger bore and stroke, most automotive manufacturers utilize a timing chain system that replaces the rubber belt with a metal chain. Generally, timing chains last longer than timing belts, with some rated to last the lifetime of the car.

Why is the timing on my camshaft not correct?

The most likely cause I can come up with is that the camshaft timing is not correct. When you installed the timing belt, did you align the marks on the crankshaft and camshaft pulleys, turn the engine over manually a time or two, and verify the marks were still properly aligned? These steps are vital to getting this job right.

Can a crank pulley be removed from a timing belt?

The crank pulley is the main pulley at the bottom of the engine. It needs to be removed in order to change the timing belt. However, it’s not easy if you only have hand tools, since the torque on this bolt is often pretty extreme.

When to know if your timing chain is going out?

Signs a Timing Chain Is Going Out. A broken timing belt can be very costly because it often controls other parts of the engine, including the balance shafts and the oil and water pumps. The time to change a timing belt will vary by vehicle and mileage. It is best to have it checked regularly.

Rubber timing belts are found in the vast majority of engines found in small cars and SUVs, particularly 4 cylinder – but some cars don’t have timing belts. In larger engines that put out more power the timing belt is replaced with a timing chain, which looks much like a bicycle chain.

Can a timing belt change cause exhaust valves to burn?

That is absolutely ludicrous and even if the intake valves are not bent due to a mistake it’s also possible that the exhaust valves could burn depending on the cam timing situation. You cannot continue to drive the car like this; period. I would approach them one time about making this right.

Navigation