What should voltage be on Arctic Cat 400?
Check the voltage at the battery with the machine running. You should have 12 or more volts – preferably around 14. Find the rectifier – it will be a cube with cooling fins on it. With a self powered test light, test it.
How can I tell if my Arctic Cat 400 has no spark?
If the battery is calling for power and the alternaotr is on and the rectifier is not working, the power goes to ground. Check the voltage at the battery with the machine running. You should have 12 or more volts – preferably around 14. Find the rectifier – it will be a cube with cooling fins on it. With a self powered test light, test it.
Why does my Arctic Cat not have power?
If the battery is not calling for power, the voltage regulator will not turn on the alternator. If the battery is calling for power and the alternaotr is on and the rectifier is not working, the power goes to ground.
What makes a rectifier on an Arctic Cat?
Find the rectifier – it will be a cube with cooling fins on it. With a self powered test light, test it. A rectifier is made up of diodes the diodes clip off one-half of the AC cycle making rectified AC which charges the battery. Your test light should light in one direction and not the other.
How can I Fix my Arctic Cat ATV?
Take the connection apart, clean it with compressed air or something in that order. Then seal with di electric grease. There is also a pinch point for the wiring harness near the handle bar riser. Check for worn wires. If you still have problems I know someone who fixes them for a hobby send me a pm and I will fill you in.
Where is the ignition switch on Arctic Cat ATV?
Under the front instrument cluster you will see screws that have to be taken out. Next unscrew the ignition switch, it also hold the cluster in place. (Third picture shows that) This will allow you to flip the cluster over to reveal the two nuts that are holding the pod in place.
How to unplug Arctic Cat 2006 LCD display?
This will allow you to flip the cluster over to reveal the two nuts that are holding the pod in place. Unplug the pod and take these two nuts out and then you can pull out the pod. You can post now and register later.