What should torque settings be for a Nissan Gu patrol flywheel?
3.Bell Housing – No specs found. I would say 25 to 35 foot pounds should be sufficient. Bolts clean on ->flywheel to crank, ->pressure plate to flywheel, and ->bell housing to back of engine, I would use TWO drops of Loctite Red threadlocker, on ALL of these bolts.
How do you Torque a flywheel on a Nissan?
KATwo40 wrote:1. Place flywheel on crank.2. Hand tighten flywheel bolts.3. Connect socket to impact wrench.4. Place end of socket/impact wrench assembly over flywheel bolts.5. Make impact wrench go “pppvvvvrrrrrgggghhghghg” several times until bolts are tight in a “criss-cross” pattern (like tightening lug nuts)6.
Where is the pressure plate on a flywheel?
Instead precise location of the pressure plate is made by the shanked area of bolt, locating into a non threaded area of 2 bolt holes in the flywheel only. Failing to run shanked bolts may result in clutch failure, damage to vehicle or injury! Also available with M8 Safety washers.
What’s the torque setting on a balancer clutch?
That’s some crazy ass torque setting for the 26 balancer bolt. Any idea what size bolt it is? Its 30mm for a RB26.. good luck getting 450nm on the RB26 bolt without a tension wrench designed to do wheel studs up on a Euclid 170T dump truck. I do them 150nm then get a pipe over it for another 1/4 of a turn….never had one come loose.
3.Bell Housing – No specs found. I would say 25 to 35 foot pounds should be sufficient. Bolts clean on ->flywheel to crank, ->pressure plate to flywheel, and ->bell housing to back of engine, I would use TWO drops of Loctite Red threadlocker, on ALL of these bolts.
What kind of clutch gear does a Datsun use?
U20 High grade flywheel bolts. Tensile strength 176,000 PSI 63 – 70 Brake & Clutch pedal pad. 1600 or 2000 flywheel ring gear. 1600 or 2000 pilot bearing. 1600 or 2000 Heavy duty clutch disc.
KATwo40 wrote:1. Place flywheel on crank.2. Hand tighten flywheel bolts.3. Connect socket to impact wrench.4. Place end of socket/impact wrench assembly over flywheel bolts.5. Make impact wrench go “pppvvvvrrrrrgggghhghghg” several times until bolts are tight in a “criss-cross” pattern (like tightening lug nuts)6.
Is the Nissan 2000 heavy duty clutch back in stock?
BACK IN STOCK ! We sell the Nissan 2000 Heavy duty clutch kit for 1600 & the 2000 models. We never, ever sell the lower kilogram 1600 pressure plate ever. The following kit includes: Nissan 2000 HD 650 KILOGRAM pressure plate from Datsun comp, OEM T/O bearing, OEM pilot bearing, high quality Japanese clutch disc/better than cardboard Nissan disc.
What are Torgue settings for NISSAN PATROL 4X4?
Just wondering is some kind person could help me out with torgue settings for my sons GU RD28 cylinder head, I bought a new head gasket and bolts but the gasket didnt come with settings or sequence any help appreciated
What kind of engine does a Nissan Patrol have?
Billy : The 2001 3 liter diesel turbo engine, should have the following engine code: ZD30DDTI…….and here are the torque settings accordingly: Billy : Full Size Image Billy :
What are the covers on a Nissan Patrol?
Timing cover, waterpump, injector pump cover (guess they’ll all be the same), thermostat housing, rocker cover, sump, rear main seal plate thing. Oh and the intake manifold and exhaust manifold.
Just wondering is some kind person could help me out with torgue settings for my sons GU RD28 cylinder head, I bought a new head gasket and bolts but the gasket didnt come with settings or sequence any help appreciated
Billy : The 2001 3 liter diesel turbo engine, should have the following engine code: ZD30DDTI…….and here are the torque settings accordingly: Billy : Full Size Image Billy :
How to help your Nissan Patrol ZD30 turbo engine?
If you own a Y61/GU NISSAN PATROL with a ZD30 3.0ltr turbo diesel engine, these are invaluable tips to help you increase the life expectancy of your engine. The ZD30 engine has suffered a poor reputation for premature failures including melting/cracking pistons and overboosting, largely due to some common issues.