What should the voltage be on an ATV battery to start it?
The battery should read 12,6 – 12,8V. Use a multimeter or a voltmeter to check the voltage. If the voltage drops too low, the battery won’t have enough charge to start the bike. Charge the battery or replace it if it’s dead.
What to do if your car battery wont start?
If it is becoming weak, it will become harder and harder for it to crank the engine. The lights and other accessories may still work because they draw less amperage (which the battery can still support). Take the battery to have it load tested. That will determine if it is still good or not.
Why does my car not start with jumper cables?
If they are damaged or corroded badly, they can prevent proper amperage draw for the starter. Since you said it starts with jumper cables, it is most likely a bad battery. As CharlieRB pointed out, just because the lights come on doesn’t mean the battery is ok.
What should my car voltage be with the car off?
Basically, you should see 12.65 volts with the car off, and over 14 volts with the car running and no loads turned on. You should also watch the multimeter while someone else cranks the car and see that the voltage doesn’t drop below about 10 volts while cranking.
Which is the best charger for ATV batteries?
The Ctec XS 0.8 is a reasonably priced, high quality charger that fits well for most ATV batteries. Click here to see todays price over at Amazon. Put the key in the “Off” position.” Locate your battery. It’s often located behind a plastic panel up high at the front of the ATV.
What should I do if my ATV battery goes bad?
There is always a small risk that something goes wrong when you charge a battery. If it were to start leaking or, in the worst case, blow up, at least you won’t damage the ATV. Connect a suitable battery charger and let it charge overnight — red cable to the positive terminal, black cable to the negative terminal or ground.
Why does my Chinese ATV not have a battery?
There are alot of things that can cause the battery issues you guys and gals are talking about. First,most Chinese atv’s come with to small of a battery and thewhen trying to replace with the proper size,the battery housing is also to small. Now the great thing is about these ATV’s is the electrical systems are simple.
The Ctec XS 0.8 is a reasonably priced, high quality charger that fits well for most ATV batteries. Click here to see todays price over at Amazon. Put the key in the “Off” position.” Locate your battery. It’s often located behind a plastic panel up high at the front of the ATV.
When do I need to top off my ATV battery?
I generally recommend using a good quality fully automatic battery tender to keep your ATV battery in good shape when the bike is not in use or whenever it needs need to be topped off. They come with the advantage that they will automatically shut off when the battery is full, or if there is a short or another issue inside the battery.
Why is my ATV battery not holding a charge?
If you could not charge the battery above 12.4V, there is a good chance the battery has gone bad from misuse or just from being old. There may be a bad cell with an internal short that prevents the battery from taking a proper charge. Another (and better) way of testing if the battery has gone bad is performing a so-called “Load test.”
What kind of Fuse does a Honda rancher use?
My 04 Honda rancher es keeps blowing 30 amp main fuse, the my 04 Honda rancher es keeps blowing 30 amp main fuse … read more Louie Shop Owner 1,625 satisfied customers My 19991500vulcan keeps blowing main30amp fuse when uh turn
Why does my ATV not have a spark?
If you have a hard time being able to tell if you can see a spark or not, you could always have a buddy hold the electrodes of the spark plug. If he yells when you try to start the engine, you have spark. There are a few reasons an ATV won’t be getting spark from the spark plugs.
Are there any problems with my Honda ATV?
No more problems ever ! – YouTube If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.
How to start an ATV that wont start?
1 Remove the spark plug from the cylinder-head and connect it to the spark-plug wire or ignition coil. 2 Grab the plug wire and hold the plug about 1/8th of an inch away from the cylinder head. 3 Activate the starter. 4 As the motor turns, you should see repetitive bright blue spark arching from the spark plug to the cylinder head.
The battery should read 12,6 – 12,8V. Use a multimeter or a voltmeter to check the voltage. If the voltage drops too low, the battery won’t have enough charge to start the bike. Charge the battery or replace it if it’s dead.
If you have a hard time being able to tell if you can see a spark or not, you could always have a buddy hold the electrodes of the spark plug. If he yells when you try to start the engine, you have spark. There are a few reasons an ATV won’t be getting spark from the spark plugs.
What to do when your ATV won’t start?
If your ATV doesn’t crank at all when you’re trying to start it, there are a few basic things to look into. 1. Make sure the kill switch/run switch is in the “ON” or “RUN” position. You’d be surprised how often the solution to an ATV that won’t start is forgetting to turn on the kill switch.
Where is the spark plug on an ATV?
To locate the ignition coil, simply follow the wire connecting to your spark plug. Once you have the ignition coil out, you can hook your multi-meter up to it to begin testing. Start by testing the primary side of the ignition coil, where the ignition coil was wired, not the side that goes to the spark plug.