What should my motorcycle battery voltage be?
Open circuit voltage for a fully, 100% charged AGM battery is 12.8 to 13.0 Volts. AGM batteries that are 75% to 100% charged will measure 12.5 to 12.8 volts. Conventional batteries have slightly lower open circuit Voltages: 12.6 volts (12.8 volts with Sulfate Stop) for 100% charge and 12.4 for 75% charge.
What voltage is a Harley Davidson motorcycle battery?
Though they may recommend an individual cell for a Harley Davidson motorcycle, it is using a 12 Volts battery with a 12 Volt system. The complete battery specs for a Harley Davidson battery is 12V, 19 amp per hour and 270 CCA.
What kind of battery does a Harley Davidson Sportster use?
Keep your Harley Sportster 1200 running both in cold and warm climes with a top Harley-Davidson Sportster battery replacement direct from J&P Cycles. Each Harley Sportster 1200 battery includes premium features like extreme vibration resistance, Absorbed Glass Mat separators, and maintenance-free performance.
What should the voltage be on a Harley Davidson battery?
Turn the ignition and start the bike. The volts should not drop below 9.6 volts when the starter engages. Turn the throttle to rev the engine. As the engine is revved, the volts should go up to 13 or 14 volts. Identify the wires. The battery charge lead runs form the voltage regulator to the positive side of the battery.
Where can I get a Harley Davidson battery replacement?
Go to Garage to select a motorcycle to ensure the best fitment. Keep your Harley Sportster 1200 running both in cold and warm climes with a top Harley-Davidson Sportster battery replacement direct from J&P Cycles.
What causes a Harley Davidson battery to go bad?
The most common cause of electrical problems on a Harley Davidson is the battery or the voltage regulator. Troubleshooting can be performed in any garage, and it saves on expensive service bills.
Keep your Harley Sportster 1200 running both in cold and warm climes with a top Harley-Davidson Sportster battery replacement direct from J&P Cycles. Each Harley Sportster 1200 battery includes premium features like extreme vibration resistance, Absorbed Glass Mat separators, and maintenance-free performance.
What’s the voltage on a Harley Davidson starter?
I check the voltage at the kill switch and get 12.3 from the black and white wire that goes to the kill switch and the start button. But, I only get 9.2 volts from the black and red wire from the start switch to the start relay. All the fuses are good and there are 12 volts to the starter and the solenoid.
Go to Garage to select a motorcycle to ensure the best fitment. Keep your Harley Sportster 1200 running both in cold and warm climes with a top Harley-Davidson Sportster battery replacement direct from J&P Cycles.
What to do if your Harley Davidson battery is dead?
If your Harley’sbattery is dead then you have come to the right place! This motorcycle battery finder will help you select the right battery for your Harley.