What should I do if my Mazda RX-8 is not running?
Allow the engine to reach operating temperature before switching off, using the stopping procedure. Should your Mazda RX-8 not reach normal operating temperature before the end of your journey, please use the following stopping procedure: With the engine running and transmission in neutral, increase engine revs to 4,000 rpm.
How many miles does a Mazda RX8 engine last?
Generally speaking, the Mazda Rx8 engine can last about 60,000 miles. It is important to keep in mind to maintain your engine and make sure that you take your car into a mechanic when you have issues. What are some of the most common complaints About the Mazda Rx8 & the Engine?
Is the Mazda RX-8 a dynamic car?
As dynamic as it can be. The Mazda RX-8 excels with an even weight distribution between all four wheels, which is key to realising its optimal driving dynamics. This distribution was realised by mounting the compact RENESIS rotary engine as low and as far back in the car as possible in a front-midship layout.
What should coolant temp be on Mazda RX-8 Renesis?
To keep the engine in top condition, the engine coolant temperature gauge needle should, ideally, reach the middle of the normal operating range between C and H before turning the engine off. If you can’t, Mazda produced a quick guide on the appropriate starting and stopping procedures for the RX-8 Renesis which we’ve replicated below:
How many miles does a Mazda RX 8 engine last?
Well it is common knowledge now with the USA Mazda required use of 5W-20 oil the engine will not last 200,000 miles as advertised and more like it the motor will only last around 30,000 miles before needing to be rebuilt again and again etc.
Why does my Mazda RX-8 engine not start?
At the time it sounded like the battery, because engine turned very slowly. Since, I’ve changed battery, checked all fuses, and engine still doesn’t start (though it engine turns fine). Would you please assist me with any info which will help me to determine what’s wrong.
What should I do if my Mazda RX-8 stall?
Try puting your car in neutral at the light – the vibration should stop or be barely noticeable. Mazda had a regional rep come out to look at my car, and his solution was to give me my 7th set of motor mounts. The vibration was a little better for about 10 feet, then it was back and worse than ever.
Why was my Mazda RX8 towed into the dealer?
It’s interesting that the tow truck driver said that this was the 3rd RX8 that he had towed into the dealer (in the last couple of weeks) because of the stalling problem. The dealer (service manager) feels that there is something going on with the car that will have to be corrected by Mazda.
How do you start a Mazda RX-8 Renesis?
If you can’t, Mazda produced a quick guide on the appropriate starting and stopping procedures for the RX-8 Renesis which we’ve replicated below: Should the engine fail to start, please use the following procedure. With the ignition off, press the accelerator pedal to the floor and hold. Turn key to start the engine, keeping the pedal to the floor.
Why does my Mazda RX-8 stall at 3000 rpm?
The rough idle appeared to go away after driving a long highway trip where RPM tended to remain above 3000 for long periods. I believe there are two things going on with the RX-8 AT. The engines simply need to run at least at 3000RPM to keep everything clean and clear.
When to use full automatic on Mazda RX-8?
1) Don’t use the full automatic in city driving. 2) For 20MPH use only 1st gear. 3) For 35MPH use only 2nd. 4) For 45MPH use only 3rd gear.) If you are traveling highway speeds above 65MPH full automatic is OK.
Is the Mazda RX 8 sold in the USA?
RX 8 owners in the USA did not buy their RX 8 with full disclosure by the Mazda dealership that the car motor and catalytic would wear out much, much quicker than other cars, due to Mazda oil requirements in the USA nor how Mazda treats the USA RX 8 customer.