What should I do if my car key is not working?
A good first step is to change the keyless remote battery. (If you’ve already done this, keep reading.) When you press the button on your key, look at it carefully to see what happens. You should see a red LED light, and this should appear whenever the Lock, Unlock, Panic, or Trunk button is pressed.
What to do if your Mercedes Benz key fob is not working?
1. Put the key in the ignition. 2. Quickly remove it within 10 seconds and hold down the Lock button. 3. While holding the Lock button, press Unlock five times. 4. Release these buttons and press the Trunk button once.
What should I do if my Mercedes Benz won’t start?
Start the car and you should be able to get around 60 psi. When the engine is running and when you turn off the engine the pressure should stay steady. Always perform this test on a cold engine. Next, make sure that the fuel injector connections are secure and not loose. Check the fuel pump and the fuel pump relay.
What to do if your car FOB is not working?
If you point your phone’s camera at the remote, you should be able to see a light when you press a button on the remote. Again, if you don’t see this light, your key fob is defective. Next, try taking the emergency metal key out of the fob and using it to manually unlock the car’s doors.
What to do if your car key won’t unlock?
How to fix a car key button that won’t lock and unlock the door. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
1. Put the key in the ignition. 2. Quickly remove it within 10 seconds and hold down the Lock button. 3. While holding the Lock button, press Unlock five times. 4. Release these buttons and press the Trunk button once.
If you point your phone’s camera at the remote, you should be able to see a light when you press a button on the remote. Again, if you don’t see this light, your key fob is defective. Next, try taking the emergency metal key out of the fob and using it to manually unlock the car’s doors.
Start the car and you should be able to get around 60 psi. When the engine is running and when you turn off the engine the pressure should stay steady. Always perform this test on a cold engine. Next, make sure that the fuel injector connections are secure and not loose. Check the fuel pump and the fuel pump relay.
A good first step is to change the keyless remote battery. (If you’ve already done this, keep reading.) When you press the button on your key, look at it carefully to see what happens. You should see a red LED light, and this should appear whenever the Lock, Unlock, Panic, or Trunk button is pressed.
What to do if your anti theft system is locked up?
If the anti-theft system has locked up your engine, you won’t be able to start it. You’ll have to disable it with these steps. Step 1: Check for the anti-theft light. It’s located on your dash and will have a blue or red light. Step 2: Turn the ignition to the “on” position.
What should I do if my Mercedes key fob is not working?
If you need a replacement battery note that Mercedes-Benz uses CR2025 battery type. Ensure you have new batteries in your key fob. Next, look carefully at your Mercedes-Benz key. When you press the button on your key you should see a small RED led light. The light should light up every time you press any of the buttons (Lock, Unlock, Panic, Trunk).