What oil does a 1998 Mercedes e320 take?
Valvoline Synthetic Motor Oil 5W-30 5 Quart.
How to change the oil in a Mercedes Benz E320?
Begin by driving the car around the block a few times to bring the oil up to operating temperature. This will help the oil drain out of the pan quicker. Jack the car up and place it on jack stands, then locate the oil drain bolt as shown here (green arrow). Use a 13mm wrench to loosen and remove the oil drain bolt.
How do you change the air filter on a Mercedes Benz?
To change the lower filters, crawl underneath the dashboard on the passenger side and remove the two screws holding the lower trim plate to the dashboard at the front edge. Once removed, you can slide the trim plate off. You’ll see the two yellow locking tabs holding the filter access doors to the bottom of the airbox.
Where is the oil filter on a Mercedes 190E?
Once fully drained, re-fit the oil drain bolt and torque it to 25 Nm (18ft/lbs.). From inside the engine compartment, locate the oil filter housing at the rear of the rear of the engine. You’ll see it just in between the firewall and the intake manifold.
Begin by driving the car around the block a few times to bring the oil up to operating temperature. This will help the oil drain out of the pan quicker. Jack the car up and place it on jack stands, then locate the oil drain bolt as shown here (green arrow). Use a 13mm wrench to loosen and remove the oil drain bolt.
To change the lower filters, crawl underneath the dashboard on the passenger side and remove the two screws holding the lower trim plate to the dashboard at the front edge. Once removed, you can slide the trim plate off. You’ll see the two yellow locking tabs holding the filter access doors to the bottom of the airbox.
Once fully drained, re-fit the oil drain bolt and torque it to 25 Nm (18ft/lbs.). From inside the engine compartment, locate the oil filter housing at the rear of the rear of the engine. You’ll see it just in between the firewall and the intake manifold.