What makes a Hyundai Santa Fe NO start?
If the ignition switch operates properly, it operates the starter relay, which is in the engine bay fuse box and makes a little click. If that operates properly, it activates the starter solenoid, which is part of the starter and makes a clunk. Then the starter motor engages.
How often does no start no crank happen?
“No Start No Crank”. It would happen once a month or so and now it seems like it is once a day or every other day. I have 135,000 miles on it. I turn the key in park and absolutely nothing happens but the key turns. I wait a while and it starts right up. Last night after getting it out of the shop – still cant find the problem – it did it again.
When was the last time my Hyundai Santa Fe ran?
This topic contains 8 replies, has 5 voices, and was last updated by Jay 3 years, 8 months ago. I am new to this forum. I am also elderly and need a car that runs.
If the ignition switch operates properly, it operates the starter relay, which is in the engine bay fuse box and makes a little click. If that operates properly, it activates the starter solenoid, which is part of the starter and makes a clunk. Then the starter motor engages.
This topic contains 8 replies, has 5 voices, and was last updated by Jay 3 years, 8 months ago. I am new to this forum. I am also elderly and need a car that runs.
When do I need to replace my solenoid starter?
When this is the case, it may be necessary to replace the entire starter when the solenoid goes bad. Sometimes the starter itself is the problem. Electrical issues can be annoying and inconvenient. They can also be hazardous and can cause damage.
Where is the starter solenoid located on a car?
Most often, a true starter relay is a small black cube plugged into an electrical fuse/relay box in the engine compartment, whereas a starter solenoid is (in most cases) attached directly to the starter on the engine (although it is sometimes located elsewhere in the engine compartment). Signs of a bad starter solenoid
What should I do if I need to replace my ignition switch?
Reconnect the cable to the negative (-) terminal on the battery, then insert the key into the ignition and turn it to start the vehicle. The vehicle should start without any issue. If it doesn’t, remove the ignition switch and reinstall it. Shut the engine off (if it starts) and disconnect the battery again.
What to do if your key is stuck in the ignition switch?
The key may be stuck in the ignition switch, but that shouldn’t stop you from turning it. If you don’t have a key, you will need to force the module to turn using a flathead screwdriver. Press the release pin inside the hole on the ignition module with a screwdriver.
Can a faulty ignition switch cause a car to stall?
A faulty ignition switch in your vehicle can cause several problems ranging from your car stalling and all lights going dark to the radio not working unless the key is wiggled from side to side. Once you’ve been able to identify the ignition switch as the source of your trouble,…
How much does it cost to replace ignition switch on Hyundai Santa Fe?
Upfront and transparent pricing. Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM. Hyundai Santa Fe Ignition Switch Replacement costs $336 on average. What is the Ignition Switch all about?
Why is the ignition switch not working on my Santa Fe?
Pulling the lock housing away from the column causes this pin to slide out of the groove in the column. When you turn the key the pin is retracted so the steering is free, you cannot turn the key so the pin is still engaged. Do not hammer, pry or use excessive force.
Where can I get an ignition switch replaced?
Hyundai Santa Fe Ignition Switch Replacement at your home or office. Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing. Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM. received a Ignition Switch Replacement.
Can a key be removed from a Santa Fe?
NO! The clamp with the two bolts that no longer have heads on them hold the camp around the steering column. Remove those two bolts and rock the steering wheel. In most cases the lock housing will fall out. If it does not TAP the housing with a hammer perpendicular to the axis of the steering column.
When does the new Hyundai Santa Fe come out?
New 2020 santafe took delivery on January 4th, 2021, with less than 5000 miles on March 21st the vehicle refuse to start after it was started and shut off while we were sitting in a parking lot. While attempting to start it getting forward collusion warning but the engine would not crank.
Is there any way to fix a Hyundai Santa Fe?
Total electrical failure with no recourse at the moment, Hyundai motor of America consumer affairs wants us to sign a settlement agreement to refund our expenses and have not fixed or replaced the car.
How big was the fire in the Hyundai Santa Fe?
By the time the fire department arrived, the vehicle was totally engulfed in flames, which reached almost 10 feet high. The fire fighters were able to contain the fire before it reached the fuel tank, but the vehicle and its contents were totally burned. The vehicle was a shell of metal and ash when it was towed away.
What to do if your Hyundai Santa Fe won’t start?
If you have a model of Santa Fe which only has a key fob with start/stop button and no place to insert a key, then try placing your key fob as close to the start/stop button as you can and then start the vehicle. Start/Stop button on Hyundai Santa Fe fourth generation TM Tip: You can try starting your Santa Fe with its second key.
When does a Santa Fe starter go bad?
When a starter goes bad, they will usually not give you much warning first. Also, if you are stuck somewhere and are trying to start your Santa Fe, the old beat the starter with a hammer trick is not a wives tale. It really can get that one last start out of it. There are a lot of issues that can cause your Santa Fe to crank, but not start.
New 2020 santafe took delivery on January 4th, 2021, with less than 5000 miles on March 21st the vehicle refuse to start after it was started and shut off while we were sitting in a parking lot. While attempting to start it getting forward collusion warning but the engine would not crank.
Why is the fuel filter on my Santa Fe not working?
The fuel filter of your Santa Fe does not wear out like a mechanical part, but it gets clogged by dirt and airborne particles and clogs over time. The permeability of the filter drops, and so does the fuel pressure.
What’s the problem with my 2013 Santa Fe?
No one has added a helpful site for this 2013 Santa Fe problem yet. Be the first! Read reviews of repair shops in your area. Enter your zip code: This is the same intermittent starting problem that others have complained about for years. Car will not start about every 8 tries. Lights come on, radio, everything but no starter engages.
When did my Hyundai Santa Fe start having issues?
I am also elderly and need a car that runs. My 2008 Hyundai Santa fe started having issues in Jan 2017. “No Start No Crank”. It would happen once a month or so and now it seems like it is once a day or every other day. I have 135,000 miles on it.
What does it mean when your Santa Fe won’t start?
The first and most common is when it won’t turn over. This just means that the engine doesn’t move when you turn the key. The second way that your Santa Fe won’t start is when the engine turns when you engage the starter, but it won’t fire and run on its own.
Why does my Hyundai Santa Fe have no crank?
Loose or corroded major electrical connections such as grounds or especially battery clamps are also common causes of no-cranks. Finally, a battery on its way out can cause this symptom. I went to car dealer last night.
When do you need a new starter for a Hyundai Santa Fe?
If the click happens and the solenoid and/or starter do not engage, you probably need a new starter. Once the starter is removed, an auto parts store can bench test it for you before selling you a replacement. If the click does not happen, the starter relay, ignition switch, or wiring may have a problem.