What kind of oil goes in Harley Forks?
Spectro Performance Oils R. HDFOE Heavy Duty Fork Oil (Type E SAE 20, 1 Quart)
What weight is Harley fork oil?
Standard type E fork oil is supposedly around 7 to 10 weight, regular SE approximately 20 weight, and the heavy duty racing SE is around 30 weight.
What is front fork oil?
Fork oil is a lubricant that is used inside the tubes of conventional front forks on a motorcycle. Each motorcycle brand has its own specifications for the grade of oil to be used in a particular model, as well as the amount. Each leg of the fork needs to have the oil changed or replaced periodically.
What is the equivalent of type E fork oil?
HD Recommendations Some say type E is equivalent to 10W, some say it’s equivalent to 15W oil or more from other manufacturers. Just keep in mind when changing fork oil, you don’t want to mix different used oils together with new oil.
What viscosity is Harley Type E fork oil?
Harley-Davidson Type B is the equivalent viscosity to Bel-Ray High Performance Fork Oil 15W and the Harley-Davidson Type E is the equivalent to Bel-Ray High Performance Fork Oil 20W. Thanks for using Bel-Ray Performance Products.
How do you change oil on a Dyna Fork?
Loosen or remove the big bolts from the top of the tubes to allow the fluid to drain better. Take out the little screws from the back of the sliders and drain the old stuff. When it stops coming out, compress the shocks a couple of times and take the screws out again to see if any more fluid drains.
What kind of oil does a Harley Davidson Fork take?
I Am Replacing My Front Fork Springs With Progressive On 2000 Vulcan 1500v Clic The Owners Manual Does
Where is the seal washer on a Dyna Fork?
At the bottom of each slider on the backside, you will see a small (mine are Phillips) screw with a seal washer. I personally like to jack the bike up and take off the front wheel, but that is not necessary. Put something under the screw to catch about 11 or so oz. of old fluid.
What kind of oil do you use on a Dyna?
Aggressively rock the bike forward and back to cycle the new fluid in the shocks. My bikes call for HD Type E fluid. (’03 UC and ’91 Dyna). Check here: