What kind of oil goes in a 10 speed Eaton Fuller transmission?
Subject: RE: What type of oil to use in Fuller 10 speed transmission? Farmboy99 is correct! Put the 50 weight synthetic in. The 80w-90 gear oil is too thick of a viscosity for that particular transmission especially in colder climates.
How much oil does a Eaton Fuller 10 speed take?
23.5 pints [11.1 liters].
How much does a Fuller 10 speed weigh?
Eaton’s Fuller 10-speed manual transmissions are the standard in transmission performance, reliability and durability….FR Series.
| Product Snapshot | |
|---|---|
| Speeds: | 10 forward, 2 reverse |
| Torque Capacity Lbs.Ft. (Nm): | 1850 (2509) |
| Weight Lbs. (kg): | 592 (269) |
| Length Inches (mm): | 29.93 (760.2) |
When to change lubricant in Eaton Fuller transmission?
1. Maintain oil level. Inspect regularly. 2. Change oil regularly. 3. Use the correct grade and type of oil. 4. Buy from a reputable dealer. Change the oil filter when fluid or lubricant is changed. Do not use mild EP gear oil or multipurpose gear oil when operating temperatures are above 230ºF (110ºC).
How big is a fuller 10 speed transmission?
Fuller® 10-Speed Transmissions MODEL CAPACITYWEIGHT*LENGTH** SPEEDS FR-9210B 950 lbs.ft. [1288 Nm] 592 lbs. [268.53 kg] 29.9 in. [760.22 mm] 10 forward, 2 reverse FR-14210B 1450 lbs.ft. [1965 Nm] 592 lbs. [268.53 kg] 29.9 in. [760.22 mm] 10 forward, 2 reverse
What kind of oil does an Eaton Fuller use?
50 WT synthetic engine or Trans oil. here ya go. All the manuals with specs are there. we use 50w synthetic on rockwell transmission. Remember too, out the plug on a Fuller with the oil……none of this index finger broke over touching the level is ok stuff. Pump it up till you get a run out the plug n cap it. ( Per Eaton ) MNdriver Thanks this.
What should the oil level be on an Eaton transmission?
If the oil is not doing its job, or if the oil level is ignored, all the maintenance procedures in the world are not going to keep the transmission running or assure long transmission life. Eaton Fuller transmissions are designed so that the internal parts operate in a bath of oil circulated by the motion of gears and shafts. 1. Maintain oil level.