What kind of oil does a 2000 Harley-Davidson take?
The Right Synthetic Motor Oil for Your 2000 Harley-Davidson FLHRCI Road King. AMSOIL synthetic lubricants are the solution for riders who want the most from their 2000 Harley-Davidson FLHRCI Road King. They resist the devastating effects of extreme heat, even in rally or parade traffic on hot days.
How much oil does a Harley-Davidson oil change take?
The Softail calls for three quarts of oil. Start with 2 1/2 quarts. It’s very important not to overfill the reservoir. Next, take the bike for a short ride to bring the engine to operating temperature.
How much oil does a 2000 Harley Softail take?
Pour three quarts of 20W50 motor oil into the oil tank’s filler neck with a funnel.
How do you change the oil in a Harley Davidson?
Drain the engine oil into an oil pan. Replace the drain plug’s O-ring, then screw it into place after the oil has drained. Tighten the drain plug to 18 foot-pounds with a torque wrench. Unscrew the oil filter from the front of the engine, using an oil filter wrench. Drain any oil trapped within the filter housing into your oil pan.
Where is the oil plug on a Harley Road King?
Place your oil pan beneath the motor oil drain plug. The drain plug is located on the right side of the motor and to the rear of the frame. Remove the drain plug with a Torx socket and replace the plug’s o-ring.
Where to drain oil on a Harley Davidson Twin Cam?
Drain the transmission oil. The transmission drain plug it centered directly above the shock absorbers. Because both the engine and transmission drain plugs are so close to each other, they can easily be drained simultaneously into the same drain pan.
What kind of oil does a Harley Davidson use?
Fill the transmission with 24 oz. of Harley-Davidson transmission fluid, using a funnel. Screw the filler plug into the transmission with a 3/8-inch Allen wrench. Tighten the filler plug to 50 inch-pounds with a torque wrench. Pull the filler cap out of the oil tank. Fill the oil tank with 3 1/2 qt. of 20W50 motorcycle oil, using a funnel.
How to change the oil on a Harley Davidson Road King?
Harley Davidson Road King oil and filter change. You will need 4 quarts of mobile 1, 20-50MC oil and HD oil filter. Tools needed 5/8 socket, and a Harley oil filter wrench. Pan and oil funnel. All the steps from draining oil and filling too checking levels. Loading…
How to change the three oil compartments on the Harley?
How to Change the Three Oil Compartments on the Harley Davidson Twin Cam Motorcycle. 1 Step 1. Warm up your Harley-Davidson motorcycle to bring its fluids to operating temperature. Start the motor and let it idle for at least 3 minutes, 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5.
Fill the transmission with 24 oz. of Harley-Davidson transmission fluid, using a funnel. Screw the filler plug into the transmission with a 3/8-inch Allen wrench. Tighten the filler plug to 50 inch-pounds with a torque wrench. Pull the filler cap out of the oil tank. Fill the oil tank with 3 1/2 qt. of 20W50 motorcycle oil, using a funnel.