What kind of engine does a Saturn L200 have?

The Saturn L200 was part of the company’s L-Series of mid-size coupes and station wagons that were based on the Opel Vectra B and was then manufactured at a GM plant in Wilmington, Delaware. The L-Series was at the time fitter with either a straight-4 engine or a V6 and coupled with either a 5-speed manual or 4-speed automatic transmission system.

What was the replacement for the Saturn L series?

About 406,300 L-series cars were built in this period. The plant was then retooled to build the Pontiac Solstice and Saturn Sky roadsters. The replacement for the L series, the Saturn Aura, arrived in August 2006 for the 2007 model-year. The Aura was built on the Epsilon platform, also shared by the Pontiac G6, and the Chevrolet Malibu.

What was the last year of the Saturn L300?

The L300 sedan and the L300 station wagon models both used the L300.1, the L300.2, and the L300.3 for both the L300 sedan and the L300 station wagon models. The Saturn L300 station wagon was discontinued after the 2004 model year.

When did the Saturn L100 airbags come out?

2002: Side curtain airbags were made available as standard equipment for the 2002 model year for the sedan models only. The Saturn L100 was discontinued after the 2002 model year. 2003: Sedans were facelifted, front and rear; wagons received the new front along with new taillights.

What’s the name of the new Saturn L200?

The LS became L100, the LS1 became L200, and the LS2 became L300. Aside from a larger fuel tank, the L-Series cars also received a couple of safety upgrades for this model year. All models received shoulder belts for the center rear seat and head curtain side airbags.

Is the Saturn L series being considered for merging?

‹ The template Infobox automobile is being considered for merging . › The Saturn L series is a line of automobiles, sedans and station wagons that were made by Saturn Corporation in Wilmington, Delaware . Poor sales of the L-series cars caused GM to cancel the line for 2005.

What was the trim level for the Saturn L series?

The L series had also adopted a type of a trim level structure that was similar to the trim level structure on the Saturn ION. The L300 sedan and the L300 station wagon models both used the L300.1, the L300.2, and the L300.3 for both the L300 sedan and the L300 station wagon models.

When did Saturn stop making the Saturn L100?

The Saturn L100 was discontinued after the 2002 model year. 2003: Sedans were facelifted, front and rear; wagons received the new front along with new taillights. Silver dash trim replaced wood trim, and a new available alloy wheel design (borrowed from Saab) were also both added for the 2003 model year.

Are there any problems with the Saturn L series?

“The Saturn L-Series vehicles have been plagued by problems from the very beginning,” said NCCC Vice President Brian Reitter. “To this day, complaints about the L-Series have never subsided.” Reitter says that the most common complaint continues to be the defective timing chain.

When did NCCC start investigating Saturn L series?

In 2003 NCCC petitioned the National Highway Traffic Safety Administration (NHTSA) to investigate repeat tail light and brake light failures in Saturn L-Series vehicles.

Is it safe to buy Saturn L in NC?

The North Carolina Consumers Council (NCCC), a nonprofit consumer education and advocacy organization that has been representing the interests of North Carolina consumers since 1968, is advising consumers against purchasing any Saturn L-Series vehicles with 2.2L engines due to a significant risk of timing chain failure.

10. 2003 Saturn L200 2003 ENGINE Engine Mechanical – 3.0L (L81) – Saturn L Series steve Monday, May 09, 2011 12:20:05 PM Page 10 © 2006 Mitchell Repair Information Company, LLC. 11. Fig. 2: Crankshaft/Pistons Disassembled View Courtesy of GENERAL MOTORS CORP.

What are the torque specifications of a Vortec bolt?

62.37 Vortec – Torque Converter Cover Bolts Type: Bolt 70 840 94.91 Vortec – Main Bearing Cap Bolts Type: Bolt 9 108 12.2 Vortec – Crankshaft Sensor Bolts (MFI) Type: Bolt 7.33 88 9.94 Vortec – Crankshaft Sensor Bolts (MFI) Type: Bolt Crankshaft Position Sensor To Engine Block 5.92 71 8.02 Vortec – Crankshaft Sensor Bolts (MFI) Type: Bolt

Where can I find the latest torque specs?

Find the most up-to-date torque spec listings in electronic format. FelPro-Only.com is your convenient source for advanced sealing information. It’s the place to learn and share “tricks of the trade,” find proper diagnosis and installation instructions, and enjoy easy access to parts reference.

What is the Check Engine Light code for Saturn?

P1272Accelerator Pedal Position Sensor 2 P1273Accelerator Pedal Position Sensor 1 P1274Injectors Wired Incorrectly P1275Accelerator Pedal Position (APP) Sensor 1 Circuit – Read Our Article on Automotive Circuit TestingFor Help With This Saturn Check Engine Light Code P1276Accelerator Pedal Position (APP) Sensor 1 Performance

When did the Saturn L300 get its name?

Model history. 2004: For the 2004 model year, the LW200 and the LW300 station wagons were both renamed as the Saturn L300 station wagon so that it would match the Saturn L300 sedan. The L series had also adopted a type of a trim level structure that was similar to the trim level structure on the Saturn ION.

How to reset ignition PassLock on a 2003 Saturn Ion 3?

If the Passlock system does not automatically reset, it can be reset manually. Turn the ignition key to the “Start” position as if you are starting the engine. Turn the ignition key to the “Run” position after two to three seconds. Leave the key in this position for 10 minutes.

How much does it cost to repair a Saturn P0420?

The cost of diagnosing the P0420 SATURN code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour. When is the code detected?

Navigation