What kind of engine does a Nissan GA have?
SOHC 2- or 3 valves x cyl. The GA engine is a 1.3 to 1.6 L inline 4 piston engine from Nissan. It has a cast-iron block and an aluminum head. There are SOHC & DOHC versions, 12 valve & 16 valve versions, carbureted, single-point and multi-point injected versions, and versions with variable valve timing (GA16DE).
What kind of engine does a Nissan Sunny have?
The GA13DE is a 1.3 L (1,295 cc) engine with DOHC and electronic gasoline injection. Bore and stroke are 71 mm × 81.8 mm (2.80 in × 3.22 in). It produces 85 PS (63 kW; 84 hp) at 6000 rpm and 109 N⋅m (80 lb⋅ft) at 4400 rpm. It was used in the 1995-1999 Nissan Sunny .
What’s the compression ratio on a Nissan GA?
Compression ratio is 9.4:1. The GA14DS is a 1.4 L (1,392 cc) 16V DOHC engine with carburetor and a 9.5:1 compression ratio. It produces 75 PS (55 kW; 74 hp) at 6000 rpm and 112 N⋅m (83 lb⋅ft) at 4000 rpm. Redline is at 6500 rpm. Catalyzed models come with electronically controlled carburetors.
Is the Nissan GA16DE the same as the Nissan DNE?
The “N” in its nomenclature means “New EGI” (emission system), meaning this engine does not have an EGR system like the GA16DE. Since 2003, the DNE variant comes with a new ECU and 3 oxygen sensors . The 1996-2000 sentra B14 chassis (super saloon, super touring, and GST) used the GA16DNE
Where are the timing marks on a Nissan?
With the engine turned off, locate the crankshaft pulley at the bottom front of the engine and remove and dirt or grime to expose the timing marks. Start the engine, allowing it to reach normal operating temperature.
How do you find the ignition time on a Nissan?
The No. 1 spark plug wire will be labeled as No. 1 on the end of it. Shine the timing light on the pulley connected to the engine’s crankshaft. Check where the timing mark on the pulley falls compared with the degree tab on the front of the engine and you will be able to see what the current ignition time is.
How do you change ignition timing on a Nissan 300ZX?
Step on the gas to bring the engine to an idle speed of 750 rpm. This will warm up the engine so that it can indicate the correct ignition timing when you check it in Step 5. Exit your 300ZX, allowing the rpm level to go back to zero. Open the hood to work on your engine.
What are the timing chains on a Nissan GA15DE?
The GA15DE has two timing chains. Intake valves are 29 mm in diameter, intake duration is 222 °, and the exhaust valves are 24 mm, exhaust duration is 222 °. The GA15DE does not have hydraulic lifters, so special shims are used to adjust the valve clearance.