What kind of coolant do you put in a 2014 Jeep Wrangler?
It requires the use of OAT antifreeze only. Both your users guide and owners manuals state, that you should not mix any other types of antifreeze with OAT. Distilled water maybe added in a emergency situation, but it will lower your boiling point and freeze protection.
Why does my Jeep smell like antifreeze?
A loose serpentine belt can also cause an antifreeze smell. The loose belt may not turn the water pump enough rpms, engine temp then rises and you smell the overheated antifreeze thru the reservoir hose/cap.
How much coolant does a 2014 Jeep Wrangler take?
| Engine lubricant oil capacity: | 5.7 liter / 6 U.S. qt / 5 imp. qt |
|---|---|
| Engine coolant capacity: | 13.25 liter / 14 U.S. qt / 11.7 imp. qt |
| Fuel tank capacity: | 67 liter / 17.7 U.S. gal / 14.7 imp. gal |
What should coolant level be on 2014 Jeep Wrangler?
Checking the engine coolant (also known as antifreeze) level in your 2014 Jeep Wrangler is pretty easy. In order to get an accurate reading, your 3.6 liter engine should be cool to the touch when you check it. Engine coolant circulates through your engine to keep it cool in the summer but won’t freeze in the winter.
How does coolant work in a Jeep Wrangler?
Engine coolant circulates through your engine to keep it cool in the summer but won’t freeze in the winter. The video above shows you where the coolant reservoir in your Wrangler is located and how to check the coolant level.
What kind of coolant to use on 2014 Jeep WK2?
For the poster with a 2014 WK2 that’s leaking coolant, your Jeep came with Mopar Purple 10 year long life OAT type coolant. That’s what you should use to top off the coolant system. No !!
What kind of coolant does a jeep G-05 use?
The original green IAT used to go from translucent green to an opaque green as it neared the end of its life. Zerex G-05 is the aftermarket equivalent of Mopar/Mercedes/Ford HOAT, but its dyed the Ford Amber. Likely because there are lot more Fords using it than Chrysler/Mercedes.
Checking the engine coolant (also known as antifreeze) level in your 2014 Jeep Wrangler is pretty easy. In order to get an accurate reading, your 3.6 liter engine should be cool to the touch when you check it. Engine coolant circulates through your engine to keep it cool in the summer but won’t freeze in the winter.
Engine coolant circulates through your engine to keep it cool in the summer but won’t freeze in the winter. The video above shows you where the coolant reservoir in your Wrangler is located and how to check the coolant level.
For the poster with a 2014 WK2 that’s leaking coolant, your Jeep came with Mopar Purple 10 year long life OAT type coolant. That’s what you should use to top off the coolant system. No !!
The original green IAT used to go from translucent green to an opaque green as it neared the end of its life. Zerex G-05 is the aftermarket equivalent of Mopar/Mercedes/Ford HOAT, but its dyed the Ford Amber. Likely because there are lot more Fords using it than Chrysler/Mercedes.