What kind of axle does a Jeep Wrangler have?
TJ Wrangler:1997-2006 Rear 3.73 ratio Dana 44 optional on Sport and Sahara models, also standard on X model Rocky Mountain Edition. 2003-2006 Rubicons also come with 44’s front and rear, and the rear Dana 44 has been an option for TJ’s for quite some time.
What kind of rear end does a Dodge have?
The stamped numbers on the left or right axle tube can also identify the axle. Chrysler Dodge differential gasket patterns can help you indentiy what rear end you have. 2000 – 2002 Front Axle Model Designation changes.
How to identify the rear axle on a Jeep Grand Cherokee?
The video will show you where you need to look beneath the vehicle to find out which style of rear axle your Jeep Grand Cherokee has. You’ll be shown where to clean the dirt off of a specific area of the axle to obtain this important information.
What kind of differential does a jeep TJ have?
Jeep introduced the inaugural Rubicon trim level on the 2003 TJ, geared toward off-roaders. Rubicon’s came standard with locking front and rear differentials. TJs come with a Dana 30 or a Dana 44 in the front and either a Dana 35 or a Dana 44 in the rear. Typically the Sport and Sahara models include the Dana 30-Front/Dana 35-Rear.
What kind of axles does a Jeep Wrangler have?
Most Sport and Sahara models come with an upgraded design Dana 35 in the rear and the same JK Dana 30 in the front. Rubicon’s are equipped with a new design Dana 44 in the front and rear. Revolution Gear & Axle offers Ring and Pinion Gear Sets in several different ratios for the following axle models, across all years of the Jeep Wrangler.
The stamped numbers on the left or right axle tube can also identify the axle. Chrysler Dodge differential gasket patterns can help you indentiy what rear end you have. 2000 – 2002 Front Axle Model Designation changes.
Jeep introduced the inaugural Rubicon trim level on the 2003 TJ, geared toward off-roaders. Rubicon’s came standard with locking front and rear differentials. TJs come with a Dana 30 or a Dana 44 in the front and either a Dana 35 or a Dana 44 in the rear. Typically the Sport and Sahara models include the Dana 30-Front/Dana 35-Rear.
Where is the 44 axle on a Jeep Wrangler?
Lastly, Dana’s 44 axle can be found under the front or rear end. And the differential cover on this one will not change from front to rear; consisting of flat sides and an angular top and bottom.
The Dana 30 only comes as a front axle and the Dana 35 only comes as a rear axle, however the Dana 44 can be found on the front and rear. Two of the most common mods for a Wrangler’s axle are regearing and installing some type of locker. Lockers force both wheels of an axle to rotate at the same speed to increase traction off-road.
What kind of drivetrain does a Jeep Wrangler have?
On Wranglers there have been several different axles that have been used from the factory, including the Dana 30, Dana 35, and Dana 44. The Dana 30 only comes as a front axle and the Dana 35 only comes as a rear axle, however the Dana 44 can be found on the front and rear.
What makes a Jeep Wrangler spin at a traffic light?
Imagine that you have a fan and a pinwheel in front of it, if you turn on the fan the pinwheel will turn because of the air moving over it. Now if you hold the pinwheel still the fan will continue to spin even though the pinwheel is not, this is why you can sit at a traffic light with the engine running.
Do you need a slip yoke on a Jeep Wrangler?
For 2.5 inch suspension lifts and larger you may need to replace your driveshafts, on YJ and TJ Wranglers you may need to install a slip yoke eliminator kit as well. Slip yokes were used with fixed length rear driveshafts instead of a fixed yoke with a two piece driveshaft.
When to change the axle on a jeep?
However, many jeep owners still believe swapping a new, beefier axle is more cost effective and better. As a general rule of thumb, most owners agree that once a jeep has been modified to run 32″ or 33″ tires, it is time to start thinking about upgrading the rear dana 35.
What kind of axle lubricant does a jeep use?
Front Axle Lubricants: Jeep Axle Lubricant or equivalent of SAE 85W-90, API grade GL-5 quality, Grade MIL-L-2105C. Dana 35 Rear Axle was used by Jeep for the XJ Cherokee 1984-97, MJ Comanche 1986-92, YJ Wrangler 1987-95, TJ Wrangler 1997-98, and Wagoneer 1984-97.
Is the Dana 35 axle a weak axle?
The Dana 35 is infamously known as a weak axle when larger tires are put on a jeep. Different owners have different experiences, with some breaking axle shafts after switching to 31″ tall tires, and others being able to handle 35″ tires. However, more often than not, the axle will break when put under high loads for extended periods of wheeling.
How big is the rear axle on a Jeep Wrangler?
The YJ Dana 30 hold a reverse cut ring and pinion, but the TJs do not. Both TJs and YJs, however, use a 5×4.5 inch bolt pattern. Dana 35: This was an axle size used on most Jeep rear axles. They had a ring gear diameter of 7 and 9/16 inches. They came with either a 3.21 or 4.10 gear ratio.
What kind of axle does a Wrangler Rubicon have?
Rubicon models come standard with a 4.10 rear gear ratio and also use a Dana 44 axle in the front with either a 3.73 or 4.10 gear ratio. The width of the axle shafts is 1.31 inches.
How are axles measured on a Wrangler model 44?
The non-Rubicon model 44s are the same length. Axle shafts with a u-joint in the center are measured from the center of the u-joint. Measuring front the center to the end of the shaft will get you the inner and outer axle lengths. C-clip axle shafts and semi-float axle shafts are measured slightly differently than the full-float shafts.
Why do Jeeps have different axles and differentials?
Stronger axles, different gear ratios, and even a tougher differential will help you tackle more difficult trails. Wranglers are known to have a terrain capable and rugged drivetrain. The solid axle design paired with an incredible 4WD system, provides Jeeps with a high degree of versatility and durability.
What kind of axles does a Jeepster Commando have?
Jeepster Commando: Dana 44 rear axle on all Jeepster Commandos, 67-69 had tapered axle Dana 44 and the 70-71 had the flanged Dana 44 axles. YJ Wrangler: Some early YJs also had a Dana 44 in the rear, but this option was only available in Canada.
How often does a jeep axle break under high loads?
Different owners have different experiences, with some breaking axle shafts after switching to 31″ tall tires, and others being able to handle 35″ tires. However, more often than not, the axle will break when put under high loads for extended periods of wheeling.
When did Chrysler stop making the Dodge Durango?
In October 2009, Chrysler announced that the shutdown of the Newark Assembly facility, which produced the Durango and the Chrysler Aspen, would be moved up to the end of 2009, thereby ending production of the Aspen and Durango after the 2009 model-year.
Where is the Dodge Durango third generation made?
The third-generation Durango is built on the same platform as the Jeep Grand Cherokee, features unibody construction, and has been assembled at the Jefferson North Assembly plant in Detroit, Michigan, since mid-2010.
How does a Dodge Durango look like a jeep?
The Durango also looks far more like Dodge’s hooligans-in-crime Charger and Challenger than it does its Jeep platform-mate. The result is a handsomely menacing-looking SUV, from its purposeful-looking lower front grille to its boomerang LED taillights out back.
What kind of suspension does a Dodge Durango have?
The design took its styling primarily from the Dodge Powerbox concept, which was itself based on the 1999 Dodge Power Wagon concept, and the 2003-2004 Durango R/T concept. Debuting for 2004 was a new coil-spring rear suspension for the solid rear axle.