What is the voltage regulator on a Chevy?
The voltage regulator is built into the alternator on all Chevys made from the 1980s to at least 2010. Simply put, the regulator restricts the amount of voltage being sent to the battery. Without a regulator the battery would receive upwards of 30-volts of power while charging, which would quickly damage or destroy your battery.
What should the voltage be in a Chevy alternator?
When your Chevy is running, you should get approximately 12.8 to 14.0 volts of power, and there is a quick and easy test to determine if your regulator is over- or under-performing. Place the red lead of you multimeter onto the positive battery terminal on your car battery.
When do you need to replace a voltage regulator?
If your voltage reading is below 13.8 volts, you have a weak battery and will need to replace it soon. Read the schematics that came with the voltage regulator. In order to test a 3-terminal voltage regulator in electronic equipment, you’ll need to know which pins are the input, output, and ground pins.
Where can I find a voltage regulator for my car?
There are 14 references cited in this article, which can be found at the bottom of the page. Voltage regulators are commonly found in vehicles and other electronic equipment. A voltage regulator will limit the maximum amount of voltage from a power source and prevents a device or alternator from shorting and overheating.
The voltage regulator is built into the alternator on all Chevys made from the 1980s to at least 2010. Simply put, the regulator restricts the amount of voltage being sent to the battery. Without a regulator the battery would receive upwards of 30-volts of power while charging, which would quickly damage or destroy your battery.
How do you replace a voltage regulator in a car?
Step 1: Locate the voltage regulator. On older cars, the voltage regulator will likely be a metal box a little more than an inch long and will plug into the dashboard. On some cars it might be held in with screws or nuts. The replacement regulator may not look like this at all. Many of these old regulators were replaced with power transistors.
When your Chevy is running, you should get approximately 12.8 to 14.0 volts of power, and there is a quick and easy test to determine if your regulator is over- or under-performing. Place the red lead of you multimeter onto the positive battery terminal on your car battery.
What should the voltage be on a battery regulator?
The regulator should cap the output of your battery at around 14.5. If the voltage reads over 14.5, it probably means that you have a faulty regulator. If your voltage reading is below 13.8 volts, you have a weak battery and will need to replace it soon. Read the schematics that came with the voltage regulator.