What is the p1009 code on a 2004 Honda Accord?

JOHN GRETHER 3,133 satisfied customers 2004 Honda Accord 2.4 ltr p1009 code. I replaced the Spool 2004 Honda Accord 2.4 ltr p1009 code. I replaced the Spool solenoid filter screen and theVTC filter screen and checked the VTC electrically.

What is the code for a 2004 Honda Accord?

2004 Honda Accord 2.4 ltr p1009 code. I replaced the Spool solenoid filter screen and theVTC filter screen and checked the VTC electrically. VTC works properly. High mileage car. Is my chain stretched…

How does the Honda Accord p1009 VTC work?

It works by using oil pressure to hydraulically move the camshaft. This allows the engine to have more power and efficiency across the RPM range. When P1009 is present, the VTC actuator is not changing the camshaft timing anymore, which leaves the engine with a more aggressive cam profile at lower RPM.

Where is the p1009 valve on a Honda?

The P1009 code is often caused by a sticking Variable Timing Control valve. The VTC valve is responsible for controlling the intake camshaft timing. It is located on the passenger side of the engine.

How much does it cost to repair a Honda p1009 code?

The cost to diagnose the P1009 HONDA code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour. How much do you know about cars?

What does DTC stand for on Honda p1009?

If an over-advanced camshaft phase (compared to the directed value) continues or when the camshaft phase is otherwise abnormal, a malfunction is detected and a DTC is stored. Need more information on how to fix the P1009 HONDA code?

Why is my Honda Accord p1009 not working?

There is no information for a P1009 on a 2007 Honda Accord but that is the readout from the device. Unfortunately we don’t have all model yet, but the information above is the same for the 2007 Honda Accord as well. The Valve Timing Control (VTC) Solenoid is the most likely cause of the problem.

How much does it cost to diagnose the p1259 Honda code?

What does this mean? The cost of diagnosing the P1259 HONDA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour. When is the P1259 HONDA code detected?

What does variable valve timing control on Honda p1009 mean?

P1009 Honda Meaning. The variable valve timing control (VTC) system controls the phase of the intake camshaft. It uses oil pressure to operate the VTC actuator so the valve timing is optimized depending on driving conditions.

Can a DTC p1009 code be troubleshooted?

YES – If DTC P1009 is indicated, check the oil passages for at the VTC system, then go to step 1. If any other Temporary DTCs or DTCs are indicated, go to the indicated DTC’s troubleshooting. NO – Troubleshooting is complete. Please remember to rate service using the rating page so that I may receive credit. Thanks

What does p1109 VTC advance stand for?

Hi Eric – According to the service sheet from the dealer, definitely indicates P1109 VTC Advance found vehicle out of time. Advise owner will need timing chain and tensioners. Advise owner if chain stretched any further could due internal damage to engine. 2004 Honda Accord LX.

What causes p1009 code on Honda Accord 2.4 liter?

The VTC has a strainer, you may have to access it and check to see if its plugged. , this is the easy part, For P1009 the causes are the VTC solenoid, the VTC strainer, and last is the VTC actuator. The actuator are the least of problem with P1009. especially since you have a rough idle it pointing into that direction.

What to do if your Honda VTC says p1009?

Honda says to clear the code then recheck to see if it comes back. Since it did for you, the next check is to see if the strainer for the VTC is clogged. If so, clean it out and do an oil change. You can also check the VTC passages. Sometimes P0341 can happen at the same time as P1009.

How can I tell if my idle control valve is working?

To check if an idle control valve is working properly, start by turning on your engine and letting it run for a minute or 2. Then, when it’s at an idling speed, take note of the RPMs in your car. Next, turn the engine off and disconnect the idle control motor under your hood.

What happens when engine RPM drops below 800?

However, when the engine RPM drops below the normal range of 800 RPM (for most cars), it is more than likely that you are dealing with an IAC valve problem. In cases where this valve is clogged or is failing, your vehicle will stall instead of slowing to an idle after the release of the throttle.

Why does my engine RPM drop when sitting idle?

Make sure you don’t add any dirt that can get sucked into the engine and damage it. i’ve seen this caused by slight loss of pressure in cylinder (s)… its sometimes an early warning of more severe problems that are developing e.g. if there is some light damage to a piston ring or the head gasket that is going to degrade further if left unremedied.

What to do if your Honda has a p1009 code?

A stretched timing chain or damaged tensioner can also set the P1009 code. Before replacing the timing chain or tensioner, check engine oil level and condition. Replaced engine oil and filter with the factory recommended oil weight if necessary. The cost to diagnose the P1009 HONDA code is 1.0 hour of labor.

When does the Idle Control System Trigger p0507?

The standard RPM per vehicle varies depending on make and model, but most engines should ideally run between 600 and 800 RPM while idling. For example, some GM vehicles will trigger code P0507 if the engine computer clocks an idle speed that is 200 RPM above the recommended range.

How much does it cost to diagnose a p1009 code?

The cost to diagnose the P1009 code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type.

Navigation