What is stabilus lift O Mat?
Stabilus manufactures gas springs for lifting, lowering, moving and adjusting. Their Lift-O-Mat line is used for lifting and lowering in a controlled manner. The gas springs are hydropneumatic adjustable elements that consist of a pressure tube, piston rod and piston housing. …
Where is the part number on a stabilus lift O Mat?
On the body of the Stabilus gas strut you will find the part number (product code) in the area marked in BLUE on the image below. The Lift o mat part number will usually consist of 6 numbers, letters or a combination of both depending on the use, followed by the Newton Force.
How do you measure a gas strut?
How To Measure Gas Struts
- Measure the Gas Strut when it is fully extended from the Centre of the End Fittings.
- Measure the Diameter of both the Barrel and the Rod.
- Measure the exposed Rod length from the Barrel to the centre of the End Fitting.
How do I know what size lift is on my truck?
Look at the front crossmembers for the lower control arms. Measure the distance from a lower control arm bolt to the factory control arm mounting hole above it. If your kit uses blocks in the rear instead of leaf springs, measure the size of the block. The rear of most kits will be 2-3 inches less lift than the front.
How do you size a gas lift?
Measure your old lift support from the middle of each rod connection point (ball socket or eyelet), not from the absolute ends. Measure the Rod Length: Measure the Rod Length from the middle of the rod end connection point to where the rod meets the tube.
How do you unlock stabilus lift mat?
To unlock, the support tube is swivelled back into the central position. The lock of a gas spring with the lock on the inside is comparable with the mechanics of a ball point pen. A light push on the piston rod in the extended position locks it; a quick movement in the extension direction releases the lock.