What is p1148 and p0031 in Nissan Versa?
P1148 is a Closed Loop Control Function in Bank 1. P0031 is Air Fuel Ratio Sensor 1 Heater Bank 1 Control Circuit Low I would Imagine these two are related. I did book an appointment at Nissan, for Friday, before I had access to a code reader, But I would like to try and do it on my own if it were possible.
What does the p1148 Nissan ECM code mean?
P1148 NISSAN Meaning. The Engine Control Module (ECM) performs ON/OFF duty control of the Air Fuel Ratio (A/F)/Heated Oxygen Sensor 1 heater corresponding to the engine operating condition to keep the temperature of Air Fuel Ratio (A/F)/Heated Oxygen Sensor 1 element at the specified range.
How much does it cost to repair a p1148 Nissan?
The cost of diagnosing the P1148 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour. When is the P1148 NISSAN code detected?
What is the p1148 function in bank 1?
P1148 is a Closed Loop Control Function in Bank 1. I would Imagine these two are related. I did book an appointment at Nissan, for Friday, before I had access to a code reader, But I would like to try and do it on my own if it were possible. I would imagine I need to replace the Heated Oxygen Sensor. Your input would be greatly appreciated!
What is the OBD 2 fault code p1148?
OBD II fault code P1148 is a manufacturer specific code that is defined by car makers Nissan and Infinity as “Closed Loop Control Function Bank 1”, and on these applications, code P1148 is set when the PCM (Powertrain Control Module) detects a condition relating to an air/fuel ratio sensor that prevents it (the PCM) from entering closed loop …
P1148 is a Closed Loop Control Function in Bank 1. P0031 is Air Fuel Ratio Sensor 1 Heater Bank 1 Control Circuit Low I would Imagine these two are related. I did book an appointment at Nissan, for Friday, before I had access to a code reader, But I would like to try and do it on my own if it were possible.
How much does it cost to diagnose the p1148 Nissan code?
Cost of diagnosing the P1148 NISSAN code Labor: 1.0 The cost of diagnosing the P1148 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour. When is the P1148 NISSAN code detected?
P1148 is a Closed Loop Control Function in Bank 1. I would Imagine these two are related. I did book an appointment at Nissan, for Friday, before I had access to a code reader, But I would like to try and do it on my own if it were possible. I would imagine I need to replace the Heated Oxygen Sensor. Your input would be greatly appreciated!
What can cause a p1148 to go bad?
There are far too many possible causes of P1148 to list them all here, but as a general rule, problems such as damaged, burnt, shorted, disconnected, or corroded wiring and connectors form the bulk of possible causes. Other possibilities could include-. Defective air/fuel ratio sensors.
P1148 NISSAN Meaning. The Engine Control Module (ECM) performs ON/OFF duty control of the Air Fuel Ratio (A/F)/Heated Oxygen Sensor 1 heater corresponding to the engine operating condition to keep the temperature of Air Fuel Ratio (A/F)/Heated Oxygen Sensor 1 element at the specified range.
OBD II fault code P1148 is a manufacturer specific code that is defined by car makers Nissan and Infinity as “Closed Loop Control Function Bank 1”, and on these applications, code P1148 is set when the PCM (Powertrain Control Module) detects a condition relating to an air/fuel ratio sensor that prevents it (the PCM) from entering closed loop
The cost of diagnosing the P1148 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour. When is the P1148 NISSAN code detected?
How to find OBD code on Nissan Pathfinder?
Turn diagnostic mode selector on ECU fully clockwise and wait until inspection lamps flash. Number of flashes displayed indicates corresponding mode. Note number of flashes, then immediately turn diagnostic mode selector fully counterclockwise. 3. On Pathfinder, Pickup and Van models, proceed as follows:
What is the OBD2 code for a Nissan OBDII?
OBDII Nissan Code Definitions. Be sure to double check the codes. Anything P1000 to P1999 or P3000 to P3400 will be Manufacturer specific and may not match the ones listed here. Check specific manufacturer pages on the site, as some of them, we list the OBD2 codes on those pages for those specific vehicles.
What does the P1168 code on a Nissan mean?
P1168 NISSAN Meaning The Engine Control Module ( ECM ) performs ON/OFF duty control of the Air Fuel Ratio (A/F)/Heated Oxygen Sensor 1 heater corresponding to the engine operating condition to keep the temperature of Air Fuel Ratio (A/F)/Heated Oxygen Sensor 1 element at the specified range.
How to read engine OBDII Codes without Nissan scan tool?
In this way, all the detected malfunctions are classified by their DTC numbers. The DTC 0000 refers to no malfunction. How to read the engine codes without a Nissan CONSULT or scan tool. (Set ECM in Diagnostic Test Mode II) Confirm that accelerator pedal is fully released, turn ignition switch ON and wait 3 seconds.
Turn diagnostic mode selector on ECU fully clockwise and wait until inspection lamps flash. Number of flashes displayed indicates corresponding mode. Note number of flashes, then immediately turn diagnostic mode selector fully counterclockwise. 3. On Pathfinder, Pickup and Van models, proceed as follows:
Where do I find the trouble code on my Nissan?
On all models, to erase DTCs using generic scan tool (GST), select mode 4. Place diagnostic switch in the Off position. Place ignition switch in the On position. Crank engine. Start and operate engine. The trouble codes will be displayed by the flashing Engine Control Lamp and the Overheat Warning Lamp and the Overheat Warning Buzzer.
When did the Nissan Versa p2a00 come out?
Came out in 2009, don’t know if it applies. Its for 07 Versa’s with DTC: P0031, P2A00, or P1148. So just had my wallet raped by Nissan. But the car is great. So the battery had a dead cell, which gave it enough power to start.
How much does it cost to repair a Nissan OBDII code?
An error occurred while retrieving sharing information. Please try again later. The cost of diagnosing the P1148 NISSAN code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type.
Came out in 2009, don’t know if it applies. Its for 07 Versa’s with DTC: P0031, P2A00, or P1148. So just had my wallet raped by Nissan. But the car is great. So the battery had a dead cell, which gave it enough power to start.