What is a VW comfort control module?

What is a VW comfort control module?

The CCM is the body computer. It controls the power windows, power sunroof, power locks, wireless remote functions, alarm, interior lights. On the GLX models it also takes care of the power seat memory and power mirror memory. This module is located under the carper just in front of the drivers seat.

What does the CCM control?

The Comfort Control Module (or Convenience Control Module) is responsible for handling the electronic functions of the vehicle. All the electronics are controlled by the Comfort Control Module (CCM). It’s a black box underneath the floor panel (RHD).

How do I reset my CCM?

Press and hold the Menu button for 3 seconds (the menu button is the center button on the circular control pad). Using the navigation arrows, navigate to Front panel menu>Administration>Reset CCM pass>Reset CCM pass. Push the menu button to select an option or commit changes.

How do you test BCM?

How to Troubleshoot a Body Control Module

  1. Pay attention to your vehicle.
  2. Check to make sure all the electronic devices are working properly.
  3. Turn the radio and CD player on.
  4. Check the fuse box if you suspect that your vehicle’s BCM is on the blink.

Can you repair a BCM?

Most of the time, a damaged BCM will have to be replaced and can’t be repaired. Water, vibration, heat and age can all contribute to a module failing, which, depending on the placement of the unit in your vehicle, can be difficult to avoid.

How much does it cost to replace the ECU?

You should expect to pay between $150 and $300 at a local repair shop or service center just to have the ECU inspected and tested. In many cases, the faulty ECU can be repaired or reprogrammed, and this type of repair will usually run between $300 to $750, depending on the make and model of your vehicle.

How do you know if you have a bad BCM?

Symptoms of a Misfiring BCM Electronics, like windshield wipers and keyless entry, stop working properly. Flashing dashboard lights, or improper dashboard lighting. I.e., you could have a check engine light that should be on but isn’t, or you can have a check engine light that is on but shouldn’t be. High speed shake.

How much does it cost to reprogram a BCM?

You will pay around $300 for most cars to replace the body control module. That includes labor and parts. The parts will cost about $150, while labor will be closer to $100 or so, depending on how long it takes to rewire the car.

How to stop VW B5 Passat wet Comfort Control Module?

VW B5 Passat Wet Comfort Control Module… If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

Where are the fuses on the Comfort Control Module?

Check the fuses in the fuse panel (fuse #5, fuse #6, fuse #14, fuse #38) and if need be, the ones on top of your relay plate. Fuse 5: Comfort system, cuise control, Climatronic, AC, Heated seat control module, and control unit for multifunction steering wheel.

Where is the wet Comfort Control Module located?

The module is located in a black box under the driver side carpet… the carpet can feel dry on the top, but there can actually be moisture under it. Plugged drains in the battery tray under the hood as well as plugged sunroof drains can lead to water accumulation inside the vehicle. http://www.passatworld.com/forums/42-… Loading…

Why does my Comfort Control Module stop working?

So, after my dome light switch broke (spring popped loose), and after trying to fix it myself, I’m now left with no power windows, power locks, or alarm, and my trunk light is on. After some net research, I found that it could be caused by the comfort control module. I’m wondering if this is an easy home fix.

Posted In Q&A