What is a shaped waistband?
A straight waistband – which is a long rectangle that generally does not have side seams. A shaped waistband – which may, or may not, have side seams.
How do you turn a straight waist into a curved waistband?
How to Turn a Straight Waistband To a Curved Waistband
- Step 1: Trim your pattern piece down and add seam allowances.
- Step 2: Cut vertical slits and overlap to remove excess width.
- Step 3: Smooth the lines.
- Step 4: Cut your fabric and interfacing.
What is another word for waistband?
What is another word for waistband?
| girdle | belt |
|---|---|
| cummerbund | sash |
| cincture | ceinture |
| cumberbund | band |
| obi | strap |
How do you attach a waistband to pants?
Press the waistband open with the seam allowance pressed towards the facing and understitch along the facing side. To grade the seam, trim the seam allowance of the facing. Fold the waistband in half along the seam and give it a good press. Your waistband is now assembled and ready to be sewn to your pants.
How do you make a shape for a waistband?
Now, using a ruler, or a hip curve, join the perpendicular lines (drawn in the previous step) with smooth curves, creating the waistband shape. Before removing the pattern from the construction underneath, mark each point of interest with a notch.
What are the different types of waistbands for women?
Waistbands smoothly encircle your waist, so they need to be made to your measurement. There are several kinds of waistbands (Figure 1). Select one that is best suited to your fabric and your body curve. Figure 1. Left to right, regular, contour, casing, and elastic waistbands.
Where do you draw a line on a waistband?
Draw a straight line from the middle notch on the lower edge of the waistband up through the centre of the respective slash line (through the centre of the overlap). You should have now transferred all the necessary details from your pattern construction onto your pattern.
How is the width of a waistband determined?
The width of the waistband is determined by preference, the method of interfacing, and the method of finishing: The typical width measurement is twice the desired width plus two seam allowances (Figure 4).