What is a 2003 Yamaha Grizzly worth?
Values
| Suggested List Price | Average Retail | |
|---|---|---|
| Base Price | $7,099 | $2,310 |
| Options (Change) | ||
| Total Price | $7,099 | $2,310 |
How wide is a 2003 Grizzly 660?
Grizzly 660 – 2003 Yamaha ATV Lineup
| 2003 Yamaha Grizzly 660 4×4 | |
|---|---|
| ENGINE | |
| Length x Width x Height | 82.1 inches x 45.3 inches x 47.6 inches |
| Wheelbase | 50.2 inches |
| Ground Clearance | 11.8 inches |
How fast is Yamaha Grizzly?
The top speed of a stock Yamaha Grizzly 700 is 64 mph.
How much does a 2003 Grizzly 660 weigh?
Grizzly 660 – 2003 Yamaha ATV Lineup
| 2003 Yamaha Grizzly 660 4×4 | |
|---|---|
| ENGINE | |
| Dry Weight | 600 lbs. |
| Front Rack Capacity | 99 lbs. |
| Rear Rack Capacity | 187 lbs. |
Why is my Yamaha Grizzly 700 not starting?
Starter problems are common across all Yamaha Grizzly 700 year models. This may be due to the spring on the compression, which needs to be put back in place. Also, valves may need to be adjusted if they are too tight. In this video by maxam home repair, the presenter showed how he fixed his Grizzly’s starting problems caused by these two factors:
Where is the Kill Switch on a Yamaha Grizzly 700?
Check out our Yamaha Grizzly 700 electrical parts diagram and starting motor parts diagram for reference. Make sure the kill switch on the left handlebar side is in the “Run” position. It might seem like a “no brainer,” but it’s actually a common oversight.
Is the Yamaha Grizzly 700 a good quad?
The Yamaha Grizzly 700 is a reliable and tough quad. With its durable frame, it can endure harsh conditions and aggressive riding styles. But it’s not all perfect.
Why does my Grizzly make a clanking noise?
Your Grizzly would also have extreme pressure in the gas tank and have power problems under load. This problem may arise from several factors like contaminated fuel, worn-out spark plug, fuel-starved engine, or a bad fuel pump. 8. It makes a clanking noise when in 2WD or 4WD.
Are there any problems with the Yamaha Grizzly?
It has steering control problems. Yamaha Grizzly power steering problems for their 2008, 2009, and 2010 models resulted in a recall of 20,000 units of 700- and 550-class Grizzlys and hundreds of rollover accident lawsuits.
What to do if your Grizzly 700 is having problems?
Below are some things you can do to prevent these problems: Verify that the battery registers 12.5V or higher. This is a good first step, especially when troubleshooting 2008 Yamaha Grizzly 700 problems with startup. Anything below the said value is indicative of an unhealthy battery, which would mean a replacement.
Why does my Grizzly bike keep backfiring?
Run at the speed where the bike seems to do most of the backfiring. Once you’re there, reach over and thumb the choke on. If the bike seems to want to run better, you’re lean. If it starts to crap out immediately, that ain’t the problem… The temperature also affects the jetting…
Check out our Yamaha Grizzly 700 electrical parts diagram and starting motor parts diagram for reference. Make sure the kill switch on the left handlebar side is in the “Run” position. It might seem like a “no brainer,” but it’s actually a common oversight.