What happens to the fuel pump if it fails?
It is part of the control system of a fuel pump and its failure, can lead to start up problems. If it fails, the engine management system records this event. In addition, a fuel pressure sensor lets the computer know; if the fuel pump has not created any pressure, during cranking operation.
How can I tell if my fuel pump relay is faulty?
2. Engine does not start. Another symptom of a faulty fuel pump relay is an engine that does not start. If the fuel pump relay fails the fuel pump will be left without power. The engine may still crank when the key is turned, however it will not be able to start due to lack of fuel.
Why does the fuel pump relay need to be Tip Top?
The fuel pump relay needs to function in tip-top condition if the engine is expected to run without any issues. Therefore, any compromise in the fuel pump relay can directly cause engine problems, such as the stalling of the engine.
How does a fuel pump relay control the fuel pump?
The fuel pump relay is usually controlled by the ignition or Powertrain Control Module, and when switched on, will provide current to the fuel pump so that it may function. As the fuel pump relay controls power to the fuel pump, any faults with it can cause issues with the fuel pump,…
It is part of the control system of a fuel pump and its failure, can lead to start up problems. If it fails, the engine management system records this event. In addition, a fuel pressure sensor lets the computer know; if the fuel pump has not created any pressure, during cranking operation.
Why does my fuel pump not prime with the key on?
Fuel pump doesn’t prime with key on. I’ve been trying to figure this out for a couple days now. My 01 Tiburon wouldn’t start the other day. It would crank, but wouldn’t fire. When I turn the key to the “on” position, the fuel pump doesn’t kick on.
How to test a suspect fuel pump relay?
1 The easiest way to test a suspect fuel pump relay is to; swap the suspect relay with a good one. 2 You may find another relay in your car with the same configuration as your fuel pump relay. Just make sure the other relay has the same configuration. 3 Remove the suspect relay and install the good relay and check if your engine fires up.
Where to check for no start fuel pump?
The first thing you want to do is check the fuse panel to see if the fuse is blown. If your car has two fuse panels than the one in the engine compartment; should be the correct one to check. The fuse panel or circuit box is usually located near the battery; and is a small black box with a removable lid.