What engine did the Fiero GT have?
| Pontiac Fiero | |
|---|---|
| Engine | 2.5 L (151 cu in) LR8 I4 2.8 L (173 cu in) L44 V6 |
| Transmission | 3-speed THM-125 automatic 4-speed Muncie manual 5-speed Getrag 282 manual 5-speed Isuzu manual |
| Dimensions | |
| Wheelbase | 2,373 mm (93.4 in) |
What is a Pontiac Fiero GT worth?
The Fiero has never escaped the realm of affordable fun, with a median #2-condition value of $7300 10 years ago; today that same condition sits at $7000. A small climb from $7200 to $7900 took place between January 2015 and May 2016, only to return to $7000 from May 2017 to January 2018.
Why do fieros catch on fire?
The Pontiac Fiero Used To Catch On Fire According to an article from the Los Angeles Times about the investigation of the Pontiac Fiero engine fires, the fires were caused by oil leaking into the engine and combusting as the engine heated up.
What was the automatic transmission on a Pontiac Fiero?
It was known as the 440-T4. It was hydraulically shifted and controlled, with the only electronically controlled component being the torque converter clutch solenoid just like the 3-speed automatic (125-C) that was available for the Pontiac Fiero.
Which is the best upgrade for a Fiero?
It is a significant upgrade over the stock Fiero Engine, probably one of the best upgrades to your Fiero. This engine block is aluminum, with cast heads. This Engine will fit with some minor modifications. It will bolt directly up to your Fiero 4-speed and 5-speed transmissions.
Can a 4T60-E be used with a Fiero engine?
Because of this, the 4T60-E cannot be used with a stock Fiero engine unless you get some kind of stand-alone transmission controller. The 4T60-E looks very similar to a 440-T4/4T60 transmission, especially if it has the stamped steel side cover (see picture showing vacuum modulator and electrical connector on the front of the transmission).
What kind of transmission does fieroguru performance use?
While Fieroguru Performance LLC has performed transmission swaps using the 92-94 HTOB Getrag 5 speed, F23 5 Speed, and the F40 6 speed, most of our R&D efforts and subsequent product offerings are focused on the F40 6-speed but occasionally there will be a part that will interchange.
When was the first Pontiac Fiero GT made?
TRANSAXLE The Fiero used a transaxle that combined the transmission and the differential. When the notchback V-6 Fiero GT was first built in 1985, the only manual transmission that could stomach the engine’s torque was the old Muncie four-speed.
It is a significant upgrade over the stock Fiero Engine, probably one of the best upgrades to your Fiero. This engine block is aluminum, with cast heads. This Engine will fit with some minor modifications. It will bolt directly up to your Fiero 4-speed and 5-speed transmissions.
While Fieroguru Performance LLC has performed transmission swaps using the 92-94 HTOB Getrag 5 speed, F23 5 Speed, and the F40 6 speed, most of our R&D efforts and subsequent product offerings are focused on the F40 6-speed but occasionally there will be a part that will interchange.
Can a Cadillac engine be converted to a Fiero engine?
The performance increase achieved with this conversion is substantial over most other engine swaps. The increase of installation labor is also substantial. It is highly recommended using the transmission that comes with the Cadillac. You can, however, bolt the Fiero stick transmission directly up to this engine.