Menu

Navigation

What does vtm 4 Lock do?

Posted on by Arif Clayton

What does vtm 4 Lock do?

The VTM-4 Lock® feature allows you to manually lock the rear differential in place to get you moving when faced with extreme conditions. By simply pushing the Lock button, you can fully engage four-wheel drive to gain momentum, putting all of your power to the rear axle.

How do you turn off the VTM-4 on a 2009 honda pilot?

To turn off vtm 4 in a honda pilot you will need to hold the button until the light turns off. With car started, press the vtm-4 lock button on the dash. Put foot on break and shift car into drive. Turn car off and put car into park.

Why does the VSA light keep coming on on my Honda Ridgeline?

If it stays on, it is letting you know that there is some problem with the Ridgeline’s VSA itself. When the light comes on, Honda suggests getting someplace safe and restarting the engine. If the VSA light doesn’t come back on, you are good to go. If it does come back on, it is time to diagnose the issue, or take it in to the shop.

How does the VTM work on a Honda Ridgeline?

Tested the traction on a snowy hill today and … read more the VTM works for a few second when you start the pilot, engine light is always on then the vtm light come on the dash and the vtm wont work gain until you restart the engine. The dealer said it was a … read more

Can a 2006 Honda Ridgeline be safely operated?

Can a 2006 Honda ridgeline be safely operated without the VTM-4 being connected, by disconnecting the VTM-4 control module or relay. The … read more ASE Certified, Ford Master… We are in a trip and the VTM-4 light came on. Are we safe to We are in a trip and the VTM-4 light came on.

What causes the VTM-4 light to go on?

Anyway, it is what was causing the engine to sputter. It inturn caused the engine light to go on which in turn make the VTM-4 light go on because according to them, when there is something wrong with the engine, it shuts down the VTM-4 because the engine is unable to supply power to it, etc.

If it stays on, it is letting you know that there is some problem with the Ridgeline’s VSA itself. When the light comes on, Honda suggests getting someplace safe and restarting the engine. If the VSA light doesn’t come back on, you are good to go. If it does come back on, it is time to diagnose the issue, or take it in to the shop.

When does the VTM-4 light come on on a ridgeline?

This is happening to me now… 06 Ridgeline with 156,673 miles. Only comes on in the morning after sitting all night. After restarting the VTM-4 light goes out and only the engine light stays on.

Why does my VSA warning light come on?

If your VSA warning light has just come on there are two main reasons why, and a third that is less likely, but that you should know about. Vehicle stability assist is just what it sounds like. A system that Honda, and every automaker, uses to help you keep the vehicle under your control.

Why does my Honda exclamation point VSA light come on?

The VSA system is also part of the traction control system and helps you get moving in slippery situations. Anti-lock braking and other related systems interact with VSA. If you have just noticed that your yellow triangle surrounding an exclamation point VSA warning light has come on, the most likely cause is you shut the system off accidentally.

What does VTM 4 Lock do?

Posted on by Arif Clayton

What does VTM 4 Lock do?

The VTM-4 Lock® feature allows you to manually lock the rear differential in place to get you moving when faced with extreme conditions. By simply pushing the Lock button, you can fully engage four-wheel drive to gain momentum, putting all of your power to the rear axle.

When does the VTM-4 warning light come on?

Yes….the VTM-4 module de-activates 4 wheel lock when the warning light is on steady or blinking. If blinking, park it right away per owner’s manual. I received the part from collegehillshonda. Yesterday my mechanic installed it. Today I took a 350 mile trip and the light DID NOT come on.

Does the VTM light work the same way as Check Engine?

Does VTM light works the same way as Check Engine (as i understood), i mean, if there was a problem and it was resolved do i need to clear error to turn off the light or it should turn off automatically? Thanks for the link, i will try to read the codes.

Why is my VTM light not working properly?

The problem was not caused my the infamous EGR valve. There are about 20 things that will trigger the VTM light, and because it is a low voltage system it is prone to errors caused by lazy sensors/connectors. The problem turned out to be a crappy plug/connection at the controller box. Here’s how to fix it: 1.

How to change the VTM-4 instrument panel light?

Remove the wire harness cover. Disconnect the differential oil temperature sensor 2 wire connector. Remove the old sensor. Install everything in reverse order with a new O-ring on the sensor and some kind of sealant on the connector to keep out the corrosion. Connector may require cleaning. Clear the computer code.

What causes the VTM-4 light to go on?

Anyway, it is what was causing the engine to sputter. It inturn caused the engine light to go on which in turn make the VTM-4 light go on because according to them, when there is something wrong with the engine, it shuts down the VTM-4 because the engine is unable to supply power to it, etc.

Does VTM light works the same way as Check Engine (as i understood), i mean, if there was a problem and it was resolved do i need to clear error to turn off the light or it should turn off automatically? Thanks for the link, i will try to read the codes.

When does the VTM-4 light come on on a ridgeline?

This is happening to me now… 06 Ridgeline with 156,673 miles. Only comes on in the morning after sitting all night. After restarting the VTM-4 light goes out and only the engine light stays on.

Why did my VTM light go out of warranty?

Finally it went out of warranty and they wanted to charge me $900 for a new controller box. The problem was not caused my the infamous EGR valve. There are about 20 things that will trigger the VTM light, and because it is a low voltage system it is prone to errors caused by lazy sensors/connectors.

Posted In Q&A