What does the instrument cluster do on a Pontiac Bonneville?

What does the instrument cluster do on a Pontiac Bonneville?

The instrument cluster on a Pontiac Bonneville is your direct line into the operating components of your engine. It tells you how fast you’re going, how much gas you have and how many revolutions per minute your engine is turning. Unfortunately, if one of the gauges stops working, then most likely the entire cluster needs to be replaced.

Do you need to remove the dash on a Pontiac?

Removing the dash is sometimes necessary if you want access to the parts under the dash, such as the radio or the gauges. The plastic on the dash of the Pontiac car can be brittle, so care needs to be taken when removing the dash.

Where is the radio bracket on a Pontiac?

Open both driver-side and passenger-side doors and locate bolts that are securing the dash directly to the frame. The bolts are located right along the side of the dash and will run up the edge. Use a screwdriver to unfasten the radio bracket to remove the radio.

How do you remove the passenger side dash?

Pull the bottom of the passenger-side dash off by hand, by pulling up and then out. Go to the driver’s door and locate the eight screws that go along the side of the driver-side dash. Remove the screws and keep them somewhere safe. Go to the passenger side and remove the eight screws that hold the dash in on that side.

Removing the dash is sometimes necessary if you want access to the parts under the dash, such as the radio or the gauges. The plastic on the dash of the Pontiac car can be brittle, so care needs to be taken when removing the dash.

The instrument cluster on a Pontiac Bonneville is your direct line into the operating components of your engine. It tells you how fast you’re going, how much gas you have and how many revolutions per minute your engine is turning. Unfortunately, if one of the gauges stops working, then most likely the entire cluster needs to be replaced.

Open both driver-side and passenger-side doors and locate bolts that are securing the dash directly to the frame. The bolts are located right along the side of the dash and will run up the edge. Use a screwdriver to unfasten the radio bracket to remove the radio.

Pull the bottom of the passenger-side dash off by hand, by pulling up and then out. Go to the driver’s door and locate the eight screws that go along the side of the driver-side dash. Remove the screws and keep them somewhere safe. Go to the passenger side and remove the eight screws that hold the dash in on that side.

Posted In Q&A