What does red lightning bolt mean on Jeep Grand Cherokee?
The red lightning bolt indicates that there is a problem with your Jeep’s Electronic Throttle Control (ETC). This is a system that replaced the mechanical throttle mechanism with a sensor based one.
Why does my Jeep have a red lightning bolt on it?
When the red lightning bolt symbol appears on your Jeep’s dash, it may mean that that the pedal position is not lined up properly causing there to be miscommunication with the sensors that control the motor which opens and closes the throttle.
Why does my car have a lightning bolt warning light?
This procedure is typically applicable any time the battery is disconnected or replaced but may still be relevant in your case. If there are any codes in the computer that relate to the gas pedal position sensor, that could cause the lightning bolt warning light to appear as well.
When did they start putting red lightning bolts on cars?
That’s when the Electronic throttle control was developed. This technology started appearing in cars from around 1990 and is designed to do away with the old mechanism. It is, however, not immune to mechanical faults and the way you know is through the red lightning bolt light on the dash board.
How to check engine light on Jeep Patriot?
The check engine light may remain on; 3) Slowly depress the accelerator pedal all the way to the floor; 4) Slowly release the accelerator pedal until it is all the way back up at the rest position; 5) Turn the ignition key to “OFF” position; 6) Start the engine and test the throttle to see if the engine speed will throttle up.
When the red lightning bolt symbol appears on your Jeep’s dash, it may mean that that the pedal position is not lined up properly causing there to be miscommunication with the sensors that control the motor which opens and closes the throttle.
When to cycle the ignition key on a red lightning bolt?
This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a problem is detected while the engine is run- ning, the light will either stay on or flash depending on the nature of the problem. Cycle the ignition key when the vehicle is safely and completely stopped and the shift lever is placed in the PARK position.
That’s when the Electronic throttle control was developed. This technology started appearing in cars from around 1990 and is designed to do away with the old mechanism. It is, however, not immune to mechanical faults and the way you know is through the red lightning bolt light on the dash board.
This procedure is typically applicable any time the battery is disconnected or replaced but may still be relevant in your case. If there are any codes in the computer that relate to the gas pedal position sensor, that could cause the lightning bolt warning light to appear as well.