What does OBD code p1399 mean on Honda?
On Honda vehicles the OBD code p1399 indicates that there is a random misfire occurring in the engine. In most cases a valve adjustment will correct this issue, however a blocked passage in the EGR (Exhaust Gas Recirculation) system can also generate this same code.
What is the code for timing belt misalignment?
Typical codes that are related to timing belt misalignment or potential sensor wheel damage are P0011, P0021, P0016 or P0018. Due to the size of this engine, clearances are very tight for the timing belt repair, especially on the smaller 4Runner.
What to do if your timing marks don’t line up?
If they don’t line up perfectly (within 1/2 tooth), turn the engine over by hand, one rotation, and recheck. Turn the crankshaft approximately 50 degrees clockwise, then backward to TDC to relieve tension in the camshaft timing gears. The timing marks should be lined up at this point.
Can you replace the timing belt on a Toyota V8?
A belt that does not have alignment marks identical to the OE belt should not even be installed. Another source of codes and driveability complaints after belt replacement is damage to the crankshaft position sensor reluctor wheel, that must come off during the process of replacing the belt.
What does p1399 mean on Honda engine?
The P1399 error code is common in Honda vehicles. It indicates that there is a random engine misfire in the vehicle’s engine. In this article, we are going to look at the causes of random engine misfires and how to fix the problem.
What does p1299 mean on Check Engine light?
If the needle enters the red section that means the engine is starting to overheat. As with other codes, this P1299 activates the Check Engine light and registers the error code. It doesn’t usually come with drivability issues. There are many possible causes for this error code to arise.
Why is the cylinder head temperature sensor not working?
Open or shorted cylinder head temperature sensor Poor electrical connection in the cylinder head temperature sensor circuit If you notice the needle entering the red section of the temperature gauge, stop the vehicle as soon as possible and switch off the engine to let it cool down.