What does maintenance required light mean on Toyota Scion?
The maintenance light in your Scion tC’s odometer case is designed to turn on when it’s time for a regularly scheduled maintenance of the vehicle. The light is no cause for alarm; it’s simply a reminder to get your tC needs to be serviced. It will not come on again until it’s time to service the tC again.
What does maintenance required mean on Scion xD?
Most often this just means your vehicle might be due for an oil change. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset.
How do I turn off the maintenance required light on my Scion xD?
Service Light Reset SCION xD
- Turn the ignition to run (one position before starting engine).
- Select trip metre A reading by using the trip metre button and then turn the ignition off.
- While pressing the trip meter reset button.
- Continue to press and hold the button until the trip meter displays “”000000″”.”
How do you turn off the maintenance required light on a Scion xA?
Hold down the trip meter reset button and turn the ignition on. Keep the button pushed in. The maintenance required light will flash for a few seconds. when it turns off, let go of the reset button.
What does maintenance required mean on Scion?
After you’ve driven your Scion for a few thousand miles, you will see a “maintenance required” orange light flash for a few seconds in the center display console every time you start your car. Do not be alarmed. this is just a reminder to have your oil changed. If you change your own oil, you can reset the light.
How do you reset the maintenance required light on a 2008 Scion xD?
2008-2013
- With vehicle ignition switched to ON position, make sure odometer reading is shown, then turn the ignition switch to OFF position.
- While holding reset button, switch ignition to ON position.
- Continue to hold the reset button until the odometer displays “000000” and/or the MAINT REQD light goes off.
How do you turn off the maintenance required light on a Scion XB?
Press and hold the odometer stem. Turn the key to “On” without starting the engine. Hold the odometer stem until the display shows “000000.” Turn the key to “Off” then turn it back on.
When do you reset the maintenance required light on a scion?
Once your Scion has been serviced, the “MAINTENANCE REQUIRED” light will need to be reset. Some servicers will neglect to do this, which can lead to premature and unnecessary service light triggers. With only a few simple steps, you can learn how to do it yourself:
How does maintenance required appear on Scion odometer?
The odometer should display a series of dashes that will appear one after the other. After that, a series of “0”s (zeroes) will display and the “Trip A” reading will return. You can now release the button. The “MAINTENANCE REQUIRED” light should be off, and the computer will now begin accumulating miles from zero.
What does the slip indicator light mean on a Toyota?
If the vehicle is in danger of slipping or if any of the drive wheels spins, the slip indicator light flashes to indicate that the VSC/TRAC systems are operating. Depending on the vehicle, a buzzer (intermittent) may sound to indicate that VSC is operating. Your vehicle is equipped with a front passenger occupant classification system.
What does the master warning light on Toyota mean?
Master warning light A buzzer sounds and the warning light flashes to indicate that the master warning system has detected a malfunction. Seat belt reminder light Warns the driver and/or front passenger to fasten their seat belts.