What does it mean when your battery reads high?
What this means is, its likely your alternator which has a built in voltage regulator and it is over charging your battery. You should have the alternator tested and most likely it will need replacement. The normal charging rate is 14.2 volts. This could ruin your battery if you let it go to long.
When to troubleshoot an unusual voltage system drop?
Troubleshooting for Unusual Voltage System Drops Usually, the first sign that your charging system is in trouble is a “battery,” “ALT,” or “CHARGE” warning light illuminating on your instrument panel while driving. It means that for some reason, the alternator has stopped charging the battery and your car is running on battery power.
When to check the voltage of a car battery?
To check this, wait 12 to 24 hours after charging to the full voltage, keep the battery out of the vehicle and measure its voltage. Another faster but less preferable way to do this is to turn on the high-beam headlights for 15 seconds, turn them off, wait five to 10 minutes, then check the voltage.
What to do if your car battery won’t charge?
A problem with your battery is causing it to not hold a charge. To check this, wait 12 to 24 hours after charging to the full voltage, keep the battery out of the vehicle and measure its voltage. Another faster but less preferable way to do this is to turn on the high-beam headlights for 15 seconds, turn them off, wait five to 10 minutes,…
How can I check the current drain on my battery?
Current drain on the battery can be checked with an ammeter. With the ignition off, disconnect one of the battery cables. Connect one ammeter lead to the battery and the other to the cable. The normal current drain on most vehicles should be about 25 milliamps or less.
What causes a battery to go bad after a long time?
But if the battery has been dry for a long time, it can cause a problem. When the plates in the cells are exposed to oxygen, it rapidly causes sulfation to build up. Sulfation is the number 1 cause of early battery failure. Plus, charging a dry battery will burn it up.
How can you tell if a battery is fully charged?
The voltage of a battery is a good way to determine the state of charge. Here’s a handy table with the breakdown: Cannot reach higher than 10.5 volts when being charged, then the battery has a dead cell Fully charged (according to the battery charger) but the voltage is 12.4 or less, the battery is sulfated
What causes a false voltage reading on a battery?
Under the intense heat of the load, one or more of the weld pieces connecting the cells is coming loose and separating. This will cut the current, and voltage will drop. When the battery cools off, the pieces will touch, barely giving a complete connection. This gives you a false voltage reading.
To check this, wait 12 to 24 hours after charging to the full voltage, keep the battery out of the vehicle and measure its voltage. Another faster but less preferable way to do this is to turn on the high-beam headlights for 15 seconds, turn them off, wait five to 10 minutes, then check the voltage.