What does code 12 mean on a Jeep Wrangler?
Quick Note: Code 12 is a very common code, and indicates the battery has been disconnected within the last 50 startups. Code 33 will always be present for jeeps without air conditioning. Neither of these codes will themselves cause a check engine light to be displayed. Great info.
Is there a code 33 on a Jeep Wrangler?
Code 33 will always be present for jeeps without air conditioning. Neither of these codes will themselves cause a check engine light to be displayed. Great info. Thanks. Glad my ’88 doesn’t have a computer.
What does the number 55 mean on a jeep TJ?
This indicates a code number 55. A code 55 will always be the last code to be displayed. This will indicate the end of all stored codes. Also, the code numbers will be displayed on the vehicle’s odometer. Each number will be displayed with a slight delay between numbers.
What is the engine code for a Jeep YJ?
Jeep check engine codes for the YJ, XJ and other OBD1 jeeps. Jeep check engine codes for the Jeep Wrangler YJ and the XJ Cherokee. These codes and video may work with other OBD1 Jeeps. When Chrysler / Jeep came up with this idea for getting the engine codes, it was a very smart move.
Quick Note: Code 12 is a very common code, and indicates the battery has been disconnected within the last 50 startups. Code 33 will always be present for jeeps without air conditioning. Neither of these codes will themselves cause a check engine light to be displayed. Great info.
Code 33 will always be present for jeeps without air conditioning. Neither of these codes will themselves cause a check engine light to be displayed. Great info. Thanks. Glad my ’88 doesn’t have a computer.
What’s the diagnostic code for a Jeep YJ?
Diagnostic trouble code and descriptions: 11*: No crank reference signal detected during cranking. Timing belt skipped one or more teeth; or intermittent loss of either camshaft position sensor or crankshaft position sensor. 12*: Battery or computer recently disconnected within the last 50 start cycles).
What does code 55 mean on an OBD1 Jeep?
Code 55 signals the end of stored OBD codes. You can repeat the key sequence as many times as needed if you were unsure of a code. *= Check Engine light will not illuminate at all times if this Trouble Code it present. **= Check Engine light will illuminate during engine operation if this Trouble Code is present.
How are the codes stored on a Jeep Wrangler?
Be sure to leave the key in the on position until the END OF CODES sequence has flashed (55) Once the Check Engine Light has turned off, it will pause in the off position for a second or two, and then start to flash, count the flashes. Each code stored will be given to you in a 2 digit sequence.
What’s the code for the obdi YJ trouble code?
The key trick: With the ignition OFF, turn the key to ON (do not start the jeep), OFF, ON, OFF, ON (Complete this sequence in under 5 seconds). Be sure to leave the key in the on position until the END OF CODES sequence has flashed (55)
Be sure to leave the key in the on position until the END OF CODES sequence has flashed (55) Once the Check Engine Light has turned off, it will pause in the off position for a second or two, and then start to flash, count the flashes. Each code stored will be given to you in a 2 digit sequence.