What does check engine light on Hyundai Elantra mean?

What does check engine light on Hyundai Elantra mean?

A check engine light can indicate a broad spectrum of problems with your 2005 Hyundai Elantra. In some cases you need to pull over immediately to prevent damage while in others you merely need to tighten you gas cap next time you stop in order to reset the service engine soon light.

What causes a Hyundai Elantra to lose motive power?

The contact stated while driving 46 mph, the vehicle loss motive power and stalled with the oil and check engine warning lights illuminated. The contact stated that the failure occurred while driving uphill. Additionally, the failure was experienced while driving at various speeds, and was experienced on several occasions.

What should I do about my 2005 Hyundai Elantra?

2005 Hyundai Elantra GLS 2.0L 4 Cyl. Sedan (4 Door) Replace your air filter! Replacing a dirty air filter can improve gas mileage by up to 4%. Isn’t efficiency great? 2005 Hyundai Elantra GLS 2.0L 4 Cyl.

What to do when your check engine light comes on?

No matter the situation, when the check engine light comes on in your Hyundai, we always suggest stopping by our service center so one of our knowledgeable technicians can properly diagnose and repair your vehicle. Our service technicians have the most up-to-date diagnostic equipment that can quickly read Hyundai OBD-II Trouble Codes.

What causes the Check Engine light to come on in a Hyundai?

In a Hyundai, the check engine light comes on as soon as the onboard diagnostic system ( OBD ) detects that there’s an issue with the way the engine operates or Evaporative Emission Control System ( EVAP) which is used to prevent gasoline vapors from escaping into the atmosphere. A fault code stored in…

Why is the Check Engine light on in a Hyundai?

The Hyundai Tucson malfunction indicator light (MIL), often referred to a the check engine light comes on and stays on when there’s a malfunction with the emission control system. Usual causes of the check engine warning light are faulty mass airflow sensor, faulty oxygen sensor or faulty exhaust gas recirculation valve (EGR).

What do the warning lights on a Hyundai Elantra mean?

The 2018 Hyundai Elantra also includes several warning lights meant to alert you to a serious problem with your vehicle that needs immediate repairs. These lights include: Braking: The letters ABS inside of a circle means your anti-lock braking system has malfunctioned.

Why does my Infiniti check engine light keep blinking?

Gas cap issues can reduce fuel pressure and allow fuel vapors to escape, reducing fuel economy and increasing harmful emissions. Failing Catalytic Converter: Your catalytic converter can eventually clog with material, especially with higher mileage vehicles.

A check engine light can indicate a broad spectrum of problems with your 2005 Hyundai Elantra. In some cases you need to pull over immediately to prevent damage while in others you merely need to tighten you gas cap next time you stop in order to reset the service engine soon light.

2005 Hyundai Elantra GLS 2.0L 4 Cyl. Sedan (4 Door) Replace your air filter! Replacing a dirty air filter can improve gas mileage by up to 4%. Isn’t efficiency great? 2005 Hyundai Elantra GLS 2.0L 4 Cyl.

What to do if your check engine light is on?

Intermittent Check Engine Light: If the check engine light on your 2005 Elantra is intermittent, try to take note of the conditions when this happens. For example, does it happen when you accelerating, driving on the highway or does it appear at low speeds? This will help your mechanic evaluate the issue.

How to check for OBD 2 problems in Hyundai Elantra?

Use a scan tool to check for OBD II trouble codes. Any faults founds need to be repaired first. • Start the engine. • Warm up the engine (15 minutes at idle). • Turn OFF the A/C. STEP 2: (Steady State Driving – This is the main section of the drive cycle)

Where can I get a Hyundai Elantra engine replaced?

The vehicle was hesitant to respond to the accelerator pedal being depressed. The vehicle was taken to the local dealer gene messer Hyundai (4025 w. Loop 289, lubbock, TX 79407, (806) 785-7853) where it was diagnosed with needing the engine to be replaced. The vehicle was not repaired. The manufacturer was informed of the failure.

What does check engine light mean on Hyundai Elantra?

A check engine light can indicate a broad spectrum of problems with your 2017 Hyundai Elantra. In some cases you need to pull over immediately to prevent damage while in others you merely need to tighten you gas cap next time you stop in order to reset the service engine soon light.

Are there any problems with the 2017 Hyundai Elantra?

Please also check out the statistics and reliability analysis of the 2017 Hyundai Elantra based on all problems reported for the 2017 Elantra. The contact owns a 2017 Hyundai Elantra. The contact stated while driving 46 mph, the vehicle loss motive power and stalled with the oil and check engine warning lights illuminated.

Use a scan tool to check for OBD II trouble codes. Any faults founds need to be repaired first. • Start the engine. • Warm up the engine (15 minutes at idle). • Turn OFF the A/C. STEP 2: (Steady State Driving – This is the main section of the drive cycle)

The contact stated while driving 46 mph, the vehicle loss motive power and stalled with the oil and check engine warning lights illuminated. The contact stated that the failure occurred while driving uphill. Additionally, the failure was experienced while driving at various speeds, and was experienced on several occasions.

How can I remove an error code from my Check Engine light?

Pressing the “READ” button on the scan tool to see the error codes of the engine. You should need a pen to write down the code or codes in the order they were received for future repairs or reference if needed. Pressing the “ERASE” button on the scan tool to remove the error code.

What to do if your engine light is on?

Engine Light Is On: 2001-2006 Hyundai Elantra – What to Do 1. Getting Started – Prepare for the repair 2. Locate OBD Port – Find the OBD port on your vehicle 3. Scan for Codes – How to scan your vehicle for trouble codes 4. More Info. – Additional information on check engine lights Share on David Hobbshelped make these videos Feedback

Why is my engine light on in my Alfa Romeo?

Faulty Oxygen Sensor: Due to long exposure to hot exhaust gas, your oxygen sensor might need replacing. The oxygen sensor provides vital air-fuel mixture information to the ECU. A faulty oxygen sensor can cause your vehicle’s computer to supply the engine with too much or too little fuel.

THE “CHECK ENGINE” LIGHT WOULD THEN ILLUMINATE AND, IN SOME CASES, THE VEHICLE DRIVER MAY NOTICE A GASOLINE ODOR. FUEL LEAKAGE IN THE PRESENCE OF AN IGNITION SOURCE COULD RESULT IN A FIRE. DEALERS WILL PRESSURE CHECK THE VEHICLE’S FUEL TANK TO DETERMINE IF IT HAS CRACKED.

Is there a recall on the 2017 Hyundai Elantra?

Hyundai Motor America (Hyundai) is recalling certain 2017 Elantra vehicles. The affected vehicles may have a damaged Electronic Power Steering (MDPS) connector resulting in a loss of electric power steering assistance. Hyundai will notify owners, and dealers will replace the EPS motor, free of charge.

What do I need to do about my Hyundai Elantra?

IF SPECIFIED LEVELS OF INTERNAL CORROSION DAMAGE ARE FOUND, THE FRONT LOWER CONTROL ARMS WILL BE REPLACED WITH NEW FRONT LOWER CONTROL ARMS INCORPORATING ADDITIONAL HOLES IN THE UPPER AND LOWER PANELS.

Why is my Hyundai Elantra not equipped with ABS?

ON VEHICLES THAT ARE NOT EQUIPPED WITH ABS, THE REAR BRAKE TUBES MAY CONTACT ONLY THE LEFT MOUNTING BRACKET. CONTACT BETWEEN THE REAR BRAKE TUBES AND THE STEERING BRACKETS COULD CAUSE WEAR AND CORROSION THAT COULD RESULT IN BRAKE FLUID LEAKAGE. FLUID LEAKAGE COULD RESULT IN REDUCED BRAKING CAPABILITY INCREASING THE RISK OF A CRASH.

Are there any problems with the Hyundai Elantra?

The most reported problem with this model, and with all Hyundai Elantra models, is the brakes making a grinding noise. The first generation of the Hyundai Elantra had relatively few issues when compared to the later years, with the 1994 being the only year that had issues from users.

Are there any recalls on the Hyundai Accent?

HYUNDAI IS RECALLING 532,633 MY 2006-2007 ACCENT, ENTOURAGE, SONATA, MY 2007 AZERA, ELANTRA AND SANTA FE, MY 2005-2007 TUCSON AND MY 2007-2008 VERACRUZ VEHICLES. THE STOP LAMP SWITCH IN THE AFFECTED VEHICLES MAY MALFUNCTION.

What causes transmission fluid to leak in Hyundai Elantra?

THE AUTOMATIC TRANSMISSION PRESSURE CONTROL SOLENOID VALVE SEALS DO NOT REMAIN SUFFICIENTLY ELASTIC, RESULTING IN TRANSMISSION FLUID LEAKAGE. THIS LEAKAGE CAN RESULT IN REDUCED PRESSURE APPLICATION TO THE CLUTCHES, BRAKE, AND KICKDOWN SERVO, ALLOWING THEM TO SLIP.

Where is the weight sensor located on a Hyundai Elantra?

THE ELECTRICAL CONNECTOR FOR THE WEIGHT SENSOR IS LOCATED UNDER THE CENTER CONSOLE, BETWEEN THE FRONT SEATS. UNDER CERTAIN CIRCUMSTANCES THE CONNECTOR COULD BECOME CONTAMINATED AND MALFUNCTION SUCH THAT THE FRONT PASSENGER AIRBAG WILL DEPLOY REGARDLESS OF THE WEIGHT OF THE OCCUPANT.

What causes a Hyundai Elantra engine to misfire?

Keeping in mind that any engine needs air, fuel, and spark for ignition, your Hyundai Elantra’s fuel system can often cause the engine to misfire. It can run too lean or rich. Alternatively, there may not be enough fuel for proper combustion, or the fuel isn’t atomizing properly.

What happens if your Elantra loses power while driving?

Engine will still run, just won’t perform as it should. Your local Hyundai dealer should be able to scan the ECM and pick up on a trouble code for that. My 2012 Elantra just did same thing while I was on interstate and I was run off road because I could not accelerate above 20 mph.

Where is the Hyundai Elantra in Little Rock located?

The contact stated the vehicle was towed to local dealer crain Hyundai of little rock located at 11701 colonel glenn rd, little rock, ar 72210 where it was diagnosed with needing to be replaced engine.  the vehicle had not been repaired as of yet. The manufacturer had not been informed of failure.

Intermittent Check Engine Light: If the check engine light on your 2005 Elantra is intermittent, try to take note of the conditions when this happens. For example, does it happen when you accelerating, driving on the highway or does it appear at low speeds? This will help your mechanic evaluate the issue.

Why is my Hyundai Elantra running so rough?

The heat of the exhaust can also bake the wiring going to/from them over time. If an oxygen sensor goes bad, it can make your Elantra run too lean (or rich). A super lean running engine will often idle rough.

No matter the situation, when the check engine light comes on in your Hyundai, we always suggest stopping by our service center so one of our knowledgeable technicians can properly diagnose and repair your vehicle. Our service technicians have the most up-to-date diagnostic equipment that can quickly read Hyundai OBD-II Trouble Codes.

Are there any problems with the 2005 Hyundai Elantra?

Curious how the 2005 Elantra compares to other years? Check out our Hyundai Elantra overview to see the most problematic years, worst problems and most recently reported complaints with the Elantra.

A check engine light can indicate a broad spectrum of problems with your 2010 Hyundai Elantra. In some cases you need to pull over immediately to prevent damage while in others you merely need to tighten you gas cap next time you stop in order to reset the service engine soon light.

Faulty Oxygen Sensor: Due to long exposure to hot exhaust gas, your oxygen sensor might need replacing. The oxygen sensor provides vital air-fuel mixture information to the ECU. A faulty oxygen sensor can cause your vehicle’s computer to supply the engine with too much or too little fuel.

Can a Hyundai Elantra pass a smog check?

ECU was recently reset and all the emission monitors are cleared. I was told that it won’t pass the smog check if the monitors are not READY status. The following is a description of the Hyundai Elantra Drive Cycle.

Can a Hyundai Elantra run with a full gas tank?

Also ensure your Hyundai Elantra’s fuel tank is 1/4 to 3/4 full. An empty gas tank or full gas tank will not allow the EVAP monitor to run. • Make sure check engine light is not on and that there are no stored trouble codes in the computer. Use a scan tool to check for OBD II trouble codes.

How to reset the warning light gas cap that is loose?

Open the door. Grasp the gas cap handle and twist it counterclockwise to unscrew it. Remove it. Replace the gas cap. Removing and replacing it ensures the thread seals properly, in case it wasn’t before. Turn the gas cap clockwise to tighten it. Continue turning until you hear it click three times. This ensures it’s seating properly.

How to fix a burnt out Hyundai Elantra headlight?

2017 Hyundai Elantra Limited 2.0L 4 Cyl. Change center stop light Don’t be the guy with your third brake light burnt out 2017 Hyundai Elantra Limited 2.0L 4 Cyl. Try this cheap fix for leaks Animals love the sweet smell of antifreeze, too bad it’s toxic! Fix your minor leaks 2017 Hyundai Elantra Limited 2.0L 4 Cyl. Change a burnt out headlight

When does the Check Engine light turn off?

The Check Engine Light will turn off if all error codes are cleared. Some scan tools have many capabilities such as freeze frame that notes some sensor readings when a code was set and removing the codes will also remove this file.

What causes check engine light on 2017 Hyundai Elantra?

The contact owns a 2017 Hyundai Elantra. The contact stated while driving 46 mph, the vehicle loss motive power and stalled with the oil and check engine warning lights illuminated. The contact stated that the failure occurred while driving uphill.

How can I get my Check Engine light to go off?

One of the possible ways of getting your check engine light to go off is pulling off the engine control unit’s fuse and then putting it back again. Although this won’t solve the problem in newer cars, it may solve the problem in a little bit older cars, and it is easy to try. Check your repair manual to find the fuse to the engine control unit.

The vehicle was hesitant to respond to the accelerator pedal being depressed. The vehicle was taken to the local dealer gene messer Hyundai (4025 w. Loop 289, lubbock, TX 79407, (806) 785-7853) where it was diagnosed with needing the engine to be replaced. The vehicle was not repaired. The manufacturer was informed of the failure.

Posted In Q&A