What does AT mean on my Mazda dashboard?
Definitely means “Automatic Transaxle” Warning Light on the Mazda (see pic below). If you are NOT low on Automatic Transmission fluid, then get your car serviced ASAP, as there might be something more serious going on. 134 people found this helpful. DavidH25 answered 8 years ago.
What does a wrench light mean on a Mazda?
present maintenance period
The wrench indicator light means the present maintenance period arrived. It will illuminate after the ignition is switched ON and it will turn off after a few seconds. If you see the Mazda wrench warning light, you should take your Mazda to a certified service center for routine maintenance.
How to turn off Mazda’s Dynamic Stability Control?
If the TCS/DSC indicator light and the DSC OFF indicator light remain illuminated even after turning the ignition switch to the ON position, consult an Authorized Mazda Dealer. Press the DSC OFF switch to turn off the TCS/DSC. The DSC OFF indicator light will illuminate. Press the switch again to turn the TCS/ DSC back on.
What does the warning light on a Mazda mean?
When both lights are illuminated, the rear wheels could lock more quickly in an emergency stop than under normal circumstances. If the warning light illuminates while driving, it indicates a malfunction of the alternator or of the charging system. Drive to the side of the road and park off the right-of-way.
When does TCS or DSC malfunction in Mazda?
This indicator light stays on for a few seconds when the ignition switch is turned to the ON position. If the TCS or DSC is operating, the indicator light flashes. If the light stays on, the TCS or DSC may have a malfunction and they may not operate correctly. Take your vehicle to an Authorized Mazda Dealer.
How to check tire pressure in a Mazda?
Tire pressure monitor indicators — click for more Anti-lock brake system fault indicator — click for more Auto brake hold system indicator — click for more Operate brake indicator — click for more Blind spot warning indicator — click for more Blind spot warning off indicators — click for more
Why is the indicator light flashing on my Mazda?
If the TCS or DSC is operating, the indicator light flashes. If the light stays on, the TCS or DSC may have a malfunction and they may not operate correctly. Take your vehicle to an Authorized Mazda Dealer. NOTE: – In addition to the indicator light flashing, a slight lugging sound will come from the engine.
What does the car and lock symbol on a Mazda 2 mean?
The car and lock symbol is the Mazda 2 security indicator light and it flashes every 2 seconds indicating that the vehicle immobiliser system is armed. If the security indicator light flashes continuously when you’re driving, a fault has been detected with the system. What to do: Do not turn off the engine as you will be unable to restart it.
What does the tyre pressure warning light on a Mazda 2 mean?
This is the Mazda 2 tyre pressure warning light. There are two instances where this light may illuminate: Illuminates: When the tyre pressure warning light illuminates along with an audible sound, the tyre pressure is too low in one or more tyres. Flashes: If the tyre pressure warning light flashes, a fault has been detected with the system.
This indicator light stays on for a few seconds when the ignition switch is turned to the ON position. If the TCS or DSC is operating, the indicator light flashes. If the light stays on, the TCS or DSC may have a malfunction and they may not operate correctly. Take your vehicle to an Authorized Mazda Dealer.