What do the warning lights on a Hyundai Santa Fe mean?
Make sure that all warning lights are OFF after starting the engine. If any light is still ON, this indicates a situation that needs attention. This warning light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. – It illuminates for approximately 6 seconds and then goes off.
How to reset Hyundai Santa Fe service required light ( 2013-2015 )?
This procedure should apply to the third generation of Hyundai Santa Fe (2013 2014 2015 model years). Hopefully, the article of How To Reset Hyundai Santa Fe Service Required Light (2013-2015) useful for you. Good Luck!
What causes a Hyundai Santa Fe engine to misfire?
There are other misfire related codes as well, but those are the most common ones. Keeping in mind that any engine needs air, fuel, and spark for ignition, your Hyundai Santa Fe’s fuel system can often cause the engine to misfire. It can run too lean or rich.
How to get out of a Hyundai Santa Fe?
Lean forward slightly and lift up the seatback recline lever. 2. Carefully lean back on the seat and adjust the seatback of the seat to the position you desire. 3. R …
What causes a flashing check engine light on a Hyundai Santa Fe?
While a majority of the time, the flashing check engine light is going to be caused by a misfire related to your Santa Fe’s ignition system or fuel system (as stated above), there are other issues that can cause it. Your timing chain could have jumped.
What are the warning lights on a Hyundai?
They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray). There are nearly 70 of them, so search carefully! Models examined include Accent, IONIQ, Kona, Elantra, NEXO, Santa Fe, Sonata, Tucson, Veloster and Venue.
There are other misfire related codes as well, but those are the most common ones. Keeping in mind that any engine needs air, fuel, and spark for ignition, your Hyundai Santa Fe’s fuel system can often cause the engine to misfire. It can run too lean or rich.
Why is my service engine soon light flashing?
Although it’s a bad sign when the service engine soon light flashes, when one of these codes comes up with it (and nothing else), it’s almost always one spark plug or ignition coil. There can be other reasons this code is thrown, you can see more by clicking on the P0301 link above.
What do the warning lights on a Hyundai i10 mean?
Whether you’re driving an i10, i20, i30, Ionic, Kona, Santa Fe or another model, the warning lights on your Hyundai’s dashboard follow a traffic light colour system: Modern Hyundai cars are filled with a raft of sensors that monitor how each system in the car is functioning.
Is there a warning light on my dashboard?
So, what is that light on your dashboard? What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster. The following are warning lights and indicators found in vehicles built by Hyundai. Click a link to learn more about each one.
Why is the Check Engine light on on my 2010 Hyundai Santa Fe?
My 2010 Hyundai Santa Fe has 82000 miles and recently the check engine light came on. My mechanic ran a diagnostic on it and said the fuel sensor was bad. The fuel sensor was not covered under warranty and would cost $800-900. This is a safety issue which should be fixed but out of my pocket as the car can stall or seize when out of gas.
Is the 2010 Hyundai Santa Fe a bad car?
Both the 2011 & 2012 Santa Fe model years DO show a significant defect trend of the engine stalling. Currently we’re not rating the 2010 Santa Fe as “bad” or “poor”. Just be aware of this potentially serious problem.
Why does my Hyundai Elantra have a check engine light?
Has the check engine light turned on in your Hyundai Elantra, Accent, Sonata, Kona, or Santa Fe? It can be alarming seeing an engine warning appear on your dashboard, especially if you’ve never seen it before. A wide array of issues can cause a check engine light to come on, some more serious than others.
When does a Hyundai Santa Fe engine stall?
In a 2-page letter to Santa Fe owners from August 2014, Hyundai claims the engine stalling only occurs under a “specific set of operating conditions”. However a class action lawsuit filed around the same time details multiple claims from Sante Fe owners that claim the engine stalling happens at any time, under any conditions.
How to change the parking light bulb in a Santa Fe?
The video above shows you how to change the parking light bulb in your 2009 Hyundai Santa Fe. The parking light is typically orange in color and in some Santa Fes is the same bulb as the turn signal.
What to do if your Hyundai Santa Fe malfunctions?
Check under the vehicle, around the rear areas of the vehicle, looking for any vacuum lines that have dry-rot cracks, holes or loose/missing connections. If these all check out, then the best thing to do at this point is to have the Diagnostic Trouble Codes (aka “p-codes”) read from the on-board computer.
What does check engine light on Hyundai Santa Fe mean?
A check engine light can indicate a broad spectrum of problems with your 2009 Hyundai Santa Fe. In some cases you need to pull over immediately to prevent damage while in others you merely need to tighten you gas cap next time you stop in order to reset the service engine soon light.
How can I tell if my Santa Fe is having problems?
This will help your mechanic evaluate the issue. Steady Check Engine Light: If your check engine light is on every time you operate your Santa Fe, you need to have it checked as soon as possible, especially if you notice performance problems or unusual noises.
The video above shows you how to change the parking light bulb in your 2009 Hyundai Santa Fe. The parking light is typically orange in color and in some Santa Fes is the same bulb as the turn signal.